Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HX1188FNL by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage, 350uH primary inductance, and dimensions of L12.7xB9.09xH5.99 mm. Ideal for surface mount applications, it operates b/w -40°C to 85°C, making it suitable for various data communication systems.
Median Price
$4.030
Lifecycle Status
Suppliers In-Stock
36
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$2.670
100+ parts
-
1k+ parts
10k+ parts
Sager
$3.030
$2.800
$2.510
Farnell
$4.780
$2.810
$2.560
DigiKey
$5.420
$4.455
$3.968
Mouser Electronics
$4.090
$3.670
Newark
$5.810
$4.550
$4.410
Element14
$7.880
$4.810
$4.690
Arrow
$3.556
Verical
TTI
$3.760
Master Electronics
$3.740
$3.620
$3.590
TTI Europe
$3.122
$2.824
Future Electronics
$5.120
$5.040
NAC Semi
$2.490
DF Sales Co.
$2.500
Nova Conductors
$3.061
Component Electronics Inc.
$5.000
$3.750
$3.250
Chip Stock
Electro Sonic
$3.500
$3.130
$2.940
Vyrian
Bristol Electronics
IBS Electronics
$7.219
$7.205
Inventory MP
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Rutronik
$2.690
Martec Srl
ComSIT Distribution GmbH
Holdelec - ElecDif-Pro
Goldney Electronics S.L.
Prism Electronics
Connector Distribution Corp
Right Parts Inc.
Sensible Micro Corp
Cyclops Electronics Ltd
Ampacity Inc.
$2.040
Semicontronic
$1.989
$1.979
Argo Parts USA
Corohmni
$3.062
Modulus Dynamics
$3.294
$3.261
$3.162
Advanced Electronics
$4.286
$4.072
Aztec Data Supply Inc.
$4.728
Continental Prestige Electronics
$3.470
$3.180
S.R.D Solutions
Perfect Parts
Authorized Procurement Solutions
Metaverse IC Inc.
RC Electronics
$3.000
$2.740
$2.650
Futuretech Components
GreenTree Electronics
Robosynatics
$0.900
Lucentia Tech
Kepictronics
Netroflash
$2.908
$2.847
Speed Components Ltd (Excess)
Assy Fe
High isolation voltage ensures reliable and safe operation in high voltage applications.
Optimal inductance value for efficient performance and signal transmission in pulse and datacom applications.
Compact size allows for easy integration into various electronic devices and equipment.
Wide operating temperature range enables usage in different environmental conditions.
Can withstand low temperatures, making it suitable for applications in cold environments.
Specifically designed for pulse and datacom applications, ensuring optimal performance in those scenarios.
Surface mount design allows for easy and secure mounting on PCBs, saving space and simplifying assembly.
Equal turns ratio ensures balanced signal transmission and efficient power conversion.
Pulse & Datacom Transformers HX1188FNL attributes and parameters. Explore more Pulse & Datacom Transformers devices from Pulse Electronics
Additional Features:
Application:
Height:
Isolation Voltage:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
HX1188FNL Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - Laser Marking 27/Mar/2017
PCN Assembly/Origin - Mult Devs Location 10/Jan/2022
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
BAV99
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
Diotec Semiconductor Ag
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
BAV99WT1G
Fairchild Semiconductor
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
750871013
Wuerth Elektronik & Kg
The Wurth Elektronik 750871013 is a pulse & datacom transformer with 1 function and 2 primary windings. It has an isolation voltage of 4500 V and inductance of 4500 uH. This transformer is suitable for applications requiring a max operating temperature of 125°C and an output voltage of 5V.
8463
Api Technologies
8463 by Api Technologies is a Pulse & Datacom Transformer with 2 functions and an isolation voltage of 1500V. It features primary inductance of 350uH, dimensions L28.57xB16.26xH5.84 (mm), and is ideal for applications such as 10/100 BASE-TX LAN networks due to its surface mounting feature and transformer type DATACOM TRANSFORMER.
1000B-5002XNLT
Inrcore
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Length: 17.78 mm; Turns Ratio (Np:Ns): 1:1; Minimum Operating Temperature: -55 Cel; Application: 10/100/1000 BASE-T;
PM-DB2745D+
Premier Magnetics
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-STD-1553; Application: DATA BUS INTERFACE; Turns Ratio (Np:Ns): 1:2.5; No. of Functions: 1;
M21038/27-05
Pulse Specialty Components
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: M21038/27-05; Height: 6.35 mm; Minimum Operating Temperature: -55 Cel; Dimensions: 12.7mm X 8.89mm X 6.35mm;
M21038/27-29T
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: M21038/27-29T; Application: GENERAL PURPOSE; Turns Ratio (Np:Ns): 1CT:1.79CT; Isolation Voltage: 100 V;
HDX8008NL
Pulse Electronics
HDX8008NL by Pulse Electronics is a Datacom Transformer with 4 functions and an isolation voltage of 1500V. It has primary inductance of 120uH, operates b/w -40 to 85°C, and features a turns ratio of 1:1. Ideal for surface mount applications in data communication systems due to its compact size and high isolation capabilities.
HX5020NL
HX5020NL by Pulse Electronics is a 4-function datacom transformer with an isolation voltage of 1500V and insertion loss of 1.2dB. It is designed for applications like 1000BASE-T, operates b/w -40°C to 85°C, and has dimensions of L27.94xB7.54xH8.33mm for surface mount installation.
SD250-3L
Coilcraft
Coilcraft's SD250-3L is a Pulse Transformer with 3750V Isolation Voltage, 1500uH Primary Inductance, and 375V-us Min ET Product. Ideal for BASE/GATE DRIVE applications, it operates b/w -40 to 85°C temperatures and features Tin/Silver terminal finish.
1000B-5002XNL
1000B-5002XNL by Pulse Electronics is a Datacom Transformer with 8 functions, inductance of 350uH, and dimensions L17.53xB12.19xH5.72 (mm). Ideal for 10/100/1000 BASE-T applications, it operates b/w -55 to 125 °C and features surface mounting method.
ST7033QNL
ST7033QNL by Pulse Electronics is a Datacom Transformer with 1:1:1 Turns Ratio, 1500V Isolation Voltage, and 90uH Primary Inductance. It operates b/w 0-70°C and is ideal for surface mount applications in pulse and data communication systems.
Defense Logistics Agency
M21038/27-05 by Defense Logistics Agency is a MIL-PRF-21038/27 approved pulse transformer with 100V isolation voltage. It features dimensions of L12.7xB8.89xH6.35 mm and operates b/w -55°C to 130°C. Ideal for datacom applications, it has a turns ratio of 1:1.41 and is through-hole mounted for easy installation.
ALT4532P-181-T05G
TDK
ALT4532P-181-T05G by TDK is a DATACOM TRANSFORMER with inductance of 180uH, suitable for 1000 BASE-T and 2.5/5G BASE-T LAN applications. It operates b/w -40°C to 105°C, with dimensions of 4.5mm x 3.2mm x 2.9mm for surface mount installation.
DCT20EFD-U32S003
DCT20EFD-U32S003 by TDK is a DATACOM TRANSFORMER with 1000V Isolation Voltage, 10uH Inductance, and 1:10 Turns Ratio. It is designed for surface mount applications in pulse and data communication systems.
1001
Newport Components
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Isolation Voltage: 2000 V; Minimum ET Product: 200 V-us;
H1164NLT
H1164NLT by Pulse Electronics is a DATACOM TRANSFORMER with 1CT:1CT Turns Ratio, 1500V Isolation Voltage, and 1dB Insertion Loss. It is designed for 10/100 BASE-TX applications, operates b/w 0-70°C, and has IEEE approval. Ideal for surface mount installations with dimensions of L28.58xB12.19xH5.84 mm.
PM-DB27408
Holt Integrated Circuits
PM-DB27408 by Holt Integrated Circuits is a DATACOM TRANSFORMER with MIL-STD-1553 approval. It has dimensions of L23.62xB10.92xH3.937 mm and operates b/w -55 to 130 °C. Ideal for DATA BUS INTERFACE, it features a turns ratio of 1:2.5 and is THROUGH HOLE MOUNTED for easy installation.
B82804A0264A210
B82804A0264A210 by TDK is a pulse transformer with inductance of 264uH, suitable for gate drive applications. It operates b/w -40 to 125°C, with dimensions of 6.7mm x 6.1mm x 5.4mm and turns ratio of 1:1:1, making it ideal for surface mount installations.
7490220123
Wurth Elektronik 7490220123 is a Pulse & Datacom Transformer with 4 functions and 1500V isolation voltage. Ideal for 1000 BASE-T applications, it has an inductance of 180uH, operates b/w -40 to 105°C, and features a surface mount design.
PM-DB2745D
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-STD-1553; Height: 3.937 mm; Length: 23.62 mm; No. of Functions: 1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
88E3082
Marvell
88E3083
BCM1190
Broadcom Ltd
DP83848K
TI
XFATM9B
Xfmrs
IP101G
IC Plus
S558-5999-Z5-F
Bel Fuse
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Dimensions: 12.32mm X 7.24mm X 5.63mm; Height: 5.63 mm; Maximum Operating Temperature: 85 Cel; Turns Ratio (Np:Ns): 1CT:1CT; 1CT:1CT;
78Q2133
Maxim
S558-5999-U7-F
Bel Fuse's S558-5999-U7-F is a Pulse & Datacom Transformer with 2 primary windings and 22 secondary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and inductance of 350uH. Ideal for LAN applications supporting 10/100 BASE-T networks, it operates b/w -40 to 85°C with dimensions L12.32xB7.24xH5.72mm for surface mount installation.
749010013
Wuerth
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): UL; CSA; Terminal Finish: TIN COPPER; Minimum Operating Temperature: -40 Cel; Inductance (Primary): 350 uH;
KSZ8893MQLI
Microchip
KSZ8893MBLI
KSZ8893MBLI by Microchip Technology is a network interface with 2 transceivers and a data rate of 100 Mbps. It operates at temperatures ranging from -40 to 85 °C and has a package size of 9mm x 9mm. This LAN switching circuit is commonly used in industrial applications.
BCM5221
7490100111
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 7490100111; Terminal Finish: TIN SILVER; JESD-609 Code: e2; Minimum Operating Temperature: -40 Cel;
KSZ8041NL
KSZ8695PI
BCM5325
BCM5241
HX1188NL
HX1188NL by Pulse Electronics is a Datacom Transformer with an Isolation Voltage of 1650V, Inductance of 350uH, and Turns Ratio of 1:1. It is designed for surface mount applications in data communication and networking equipment due to its compact dimensions (L12.7xB7.11xH5.97 mm) and wide operating temperature range (-40 to 85°C).
HX1188NLT
HX1188NLT by Pulse Electronics is a DATACOM TRANSFORMER with 1650V isolation voltage, 350uH inductance, and 1:1 turns ratio. Ideal for surface mount applications in data communication systems due to its compact L12.7xB7.11xH5.97 (mm) dimensions and wide operating temperature range (-40°C to 85°C).
HX1188FNLT
HX1188FNLT by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1:1 turns ratio. It is designed for surface mount applications in data communication systems, offering compact dimensions of L12.7xB9.09xH5.99 (mm) and operating temperatures from -40 to 85°C.
HX1198NL
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Application: GENERAL PURPOSE; No. of Functions: 1; Height: 5.97 mm;
HX1198FNLT
HX1198FNLT by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and -40 to 85°C operating temperature range. It is ideal for surface mount applications in data communication and pulse transformer circuits.
HX1198FNL
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Turns Ratio (Np:Ns): 1:1CT; 1:1CT; No. of Functions: 1; Width: 9.09 mm;
HX1198NLT
HX1198NLT by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1:1CT turns ratio. It is designed for surface mount applications in pulse and data communication systems. With dimensions of L12.7xB7.11xH5.97 mm, it operates b/w -40°C to 85°C temperature range efficiently.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved