Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Halo Electronics' TG110-S050N2RL is a Pulse & Datacom Transformer with 1500V isolation voltage, 1.1dB insertion loss, and 0.4uH inductance. Ideal for 10/100 BASE-TX and Ethernet applications, it operates b/w 0-70°C with dimensions of L12.7xB7.112xH5.08mm for surface mount installation.
Median Price
$1.890
Lifecycle Status
Suppliers In-Stock
28
In-Stock Inventory
1k+
Future Electronics
1+ parts
-
100+ parts
1k+ parts
$1.830
10k+ parts
Verical
$2.501
Arrow
$1.696
$1.584
Nova Conductors
$1.675
Chip Stock
LIBRA Elektronik GmbH
Bristol Electronics
Vyrian
NAC Semi
$4.820
IBS Electronics
$2.028
$1.950
Sunrise Surplus Inc.
Electronics Depot
Prism Electronics
Flex Direct, LLC
Cyclops Electronics Ltd
Atlantic Semiconductor
EMSNET
North Shore Components
NexGen Digital
Semtec, LLC
LWI Electronics Inc
PC Components Company LLC
Speed Components Ltd
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Sogenti Electronics
ComSIT Distribution GmbH
ComSIT USA
Argo Parts USA
$1.620
Continental Prestige Electronics
$1.588
Advanced Electronics
$1.637
Netroflash
Corohmni
$3.259
Aztec Data Supply Inc.
$5.130
Perfect Parts
Assy Fe
S.R.D Solutions
Cyclops Electronics Ltd (Excess)
Kepictronics
ChipstoGo Electronic ltd
Computer Components Inc. - USA
Having both EN and UL approvals ensures that the product meets international safety and quality standards, making it a reliable choice for various applications.
The high isolation voltage of 1500V ensures electrical safety and prevents any potential damage to sensitive equipment connected to the transformer.
Low insertion loss of 1.1 dB indicates minimal loss of signal strength during transmission, ensuring high performance and clear data transmission.
Compact dimensions make it easy to integrate this transformer into a variety of electronic devices and circuit boards without taking up too much space.
With a maximum operating temperature of 70°C, this transformer can withstand high temperatures, making it suitable for use in various operating environments.
Specifically designed for data communication applications, this transformer is optimized for efficient data transmission and is a reliable choice for pulse and datacom applications.
Pulse & Datacom Transformers TG110-S050N2RL attributes and parameters. Explore more Pulse & Datacom Transformers devices from Halo Electronics
Additional Features:
Application:
Approvals (V):
Height:
Insertion Loss:
Isolation Voltage:
JESD-609 Code:
Length:
Mounting Feature:
No. of Functions:
No. of Winding (Secondary):
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Inductance (Primary):
Sub-Category:
Terminal Finish:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
TG110-S050N2RL Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HALO Extending Lead Times (PDF)
Product Change Notification (PDF)
HALO’s mission is to provide the highest quality products at a competitive price while providing “best-in-class” customer service. HALO is a privately held company which allows flexibility and quick decision making to best serve our customers changing demands. HALO designs and manufactures a broad line of communication and power magnetics. Its products are found across the world in markets from consumer devices to critical medical and high reliability applications. Headquartered in Las Vegas, NV HALO has sales locations in most major markets with the bulk of the R&D done in the United States and China. HALO’s product applications include networking and telecom equipment, industrial control, medical systems, automotive, security, and many more.
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
New Jersey Semiconductor Products
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
Sangdest Microelectronics (Nanjing)
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
TG110-E050N5LFTR
Halo Electronics
TG110-E050N5LFTR by Halo Electronics is a DATACOM TRANSFORMER with 1500V isolation voltage, 1CT:1CT turns ratio, and dimensions of L12.7xB7.11xH6.35 mm. Ideal for 10/100 BASE-TX applications, it operates b/w -40 to 85°C and features surface mounting method.
78253/35MC
C&d Technologies
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 78253; Terminal Finish: Tin (Sn); Length: 9.52 mm; Width: 8.89 mm;
HX1198FNLT
Pulse Electronics
HX1198FNLT by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and -40 to 85°C operating temperature range. It is ideal for surface mount applications in data communication and pulse transformer circuits.
S558-5999-U7-F
Bel Fuse
Bel Fuse's S558-5999-U7-F is a Pulse & Datacom Transformer with 2 primary windings and 22 secondary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and inductance of 350uH. Ideal for LAN applications supporting 10/100 BASE-T networks, it operates b/w -40 to 85°C with dimensions L12.32xB7.24xH5.72mm for surface mount installation.
96046123229
Littelfuse
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 13.5 mm; No. of Functions: 2; Length: 14 mm; Isolation Voltage: 1875 V;
Q4470-CLD
Coilcraft
Coilcraft's Q4470-CLD is a 0.25 W pulse transformer with 1500 V isolation voltage and 400 uH primary inductance. Ideal for gate drive applications, it operates b/w -40 to 85 °C, has a turns ratio of 1CT:1.3CT, and features surface mounting.
Q1553-20
Q1553-20 by Pulse Electronics is a through-hole mounted pulse transformer with dimensions of 12.7x8.89x6.35mm. It operates b/w -55°C to 130°C, with a turns ratio of 1:1.41. Ideal for pulse and datacom applications requiring compact size and reliable performance in various temperature conditions.
ALT4532M-201-T001
TDK
ALT4532M-201-T001 by TDK is a Datacom Transformer with inductance of 200uH, suitable for 10/1000 BASE-T, 100 BASE-TX LAN applications. It operates b/w -40 to 85°C and has dimensions of 4.5mm x 3.2mm x 2.9mm for surface mounting.
PA0264NLT
PA0264NLT by Pulse Electronics is a Pulse Transformer with 1500V isolation voltage, 1140uH primary inductance, and 12.7 V-us min ET product. Ideal for GATE DRIVE applications, it operates b/w -40 to 130 °C and comes in L8.6xB6.7xH3.6 mm dimensions for surface mount assembly.
PM-DB2745D
Holt Integrated Circuits
PM-DB2745D by Holt Integrated Circuits is a DATACOM TRANSFORMER with MIL-STD-1553 approval. It has dimensions of L23.62xB16.0xH3.937 mm and operates b/w -55 to 130 °C. Ideal for DATA BUS INTERFACE, it features a turns ratio of 1:2.5 and 1:1.79, making it suitable for through-hole mounting applications.
74020
Pico Electronics
The Pico Electronics 74020 pulse transformer features an isolation voltage of 500V, inductance of 2400uH, and min ET product of 40V-us. Ideal for datacom applications, this through-hole mounted transformer operates b/w -55°C to 130°C with dimensions of L11.43xB11.43xH7.11mm.
750311595
Wuerth Elektronik & Kg
Wuerth Elektronik & Kg 750311595 is a DATACOM TRANSFORMER with 1500V isolation voltage, 12uH inductance, and 3A output current. It is used for pulse applications in data communication systems due to its compact dimensions of L32.31xB27.03xH13.69 (mm) and surface mounting feature.
M-21038/27-05
Data Device
Data Device's M-21038/27-05 is a MIL-PRF-21038/27 approved pulse transformer with 100V isolation voltage and 150ns max pulse rise time. Measuring L12.7xB8.89xH6.35 mm, it operates b/w -55°C to 130°C. Ideal for applications requiring precise signal transmission in compact spaces.
HM2113ZNLT
HM2113ZNLT by Pulse Electronics is a DATACOM TRANSFORMER with 150uH primary inductance and 4300V isolation voltage. It operates b/w -40 to 125 °C, making it ideal for AEC-Q200 approved applications requiring high voltage isolation and compact surface mount design.
PM-DB2745L
Premier Magnetics
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Dimensions: L16.0XB16.0XH3.937 (mm); Maximum Operating Temperature: 130 Cel; Width: 16 mm;
ALAN210001-3J41DT
Abracon
ALAN210001-3J41DT by Abracon is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 350uH inductance. Ideal for LAN, 10/100/1000 BASE-T, and Ethernet applications. Compact at 6.2mm height, 12.44mm width, and 18.38mm length with surface mount feature for easy installation.
H1260T
H1260T by Pulse Electronics is a DATACOM TRANSFORMER with 1500V Isolation Voltage, 350uH Inductance, and 1:1 Turns Ratio. It is designed for 10/100 BASE-T applications, featuring compact dimensions of L12.7xB7.11xH6.0 (mm) and surface mounting feature for easy integration in networking equipment. Operating temperature ranges from 0 to 70°C, making it suitable for various data communication setups.
78250MC
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 78250; Terminal Finish: Tin (Sn); Width: 8.89 mm; Maximum Operating Temperature: 85 Cel;
78601/9C
Murata Manufacturing
Murata Manufacturing's 78601/9C is a pulse transformer with 10000 uH primary inductance, 1000 V isolation voltage, and 56 V-us min ET product. It is used for datacom applications due to its through-hole mounting feature and compact dimensions of 6.35mm x 9mm x 9.52mm.
1000B-5001XNL
Inrcore
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Isolation Voltage: 1500 V; Inductance (Primary): 350 uH; Application: 10/100/1000 BASE-T; No. of Functions: 4;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TG110-E050N5RL
TG110-E050N5RL by Halo Electronics is a Pulse & Datacom Transformer with 1500V isolation voltage. It has 2 functions, 0.4uH primary inductance, and 1CT:1CT turns ratio. Ideal for applications like 10/100 BASE-TX and ETHERNET due to its compact dimensions of L12.7xB7.11xH6.35 mm and surface mounting feature.
TG110-S050N2RLTR
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: 0 Cel; Turns Ratio (Np:Ns): 1CT:1CT; 1CT:1CT; Minimum Operating Frequency: 100 KHz; Packing Method: TAPE & REEL;
TG110-E050N5LF
Halo Electronics' TG110-E050N5LF is a DATACOM TRANSFORMER with 1500V isolation voltage, 0.4uH inductance, and 1CT:1CT turns ratio. Ideal for 10/100 BASE-TX and ETHERNET applications, it operates b/w -40 to 85 °C with dimensions of L12.7xB7.11xH6.35 mm for surface mount installation.
TG110-S050N2LF
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN; UL; Terminal Finish: MATTE TIN OVER NICKEL; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 70 Cel;
TG110-S050N2LFTR
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Isolation Voltage: 1500 V; No. of Functions: 2; Turns Ratio (Np:Ns): 1CT:1CT; 1CT:1CT; Height: 5.08 mm;
TG110-E050N5RLTR
TG110-E050N5RLTR by Halo Electronics is a DATACOM TRANSFORMER for 10/100 BASE-TX Ethernet applications. It offers 2 functions with an isolation voltage of 1500V and primary inductance of 350uH. This surface mount transformer operates b/w -40°C to 85°C, measuring L12.7xB7.11xH6.35mm in dimensions.
TG110-S050N2
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN LEAD; Dimensions: L12.7XB7.11XH5.08 (mm); Length: 12.7 mm; Width: 7.11 mm;
TG110-E055N5RL
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN; UL; Terminal Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; Isolation Voltage: 1500 V; Inductance (Primary): .4 uH;
TG110-S050N2TR
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; Packing Method: TR; Turns Ratio (Np:Ns): 1CT:1CT; 1CT:1CT; Length: 12.7 mm;
TG111-E12NYNLF
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Additional Features: HEIGHT DIMENSION INCLUDES TERMINAL ALSO; Length: 14.22 mm; Minimum Operating Temperature: -40 Cel; Height: 8.64 mm;
TG110-E055N5RLTR
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN; UL; Inductance (Primary): .4 uH; Height: 6.35 mm; Maximum Operating Temperature: 85 Cel;
TG110-AEX50N5LF
TG110-AEX50N5LF by Halo Electronics is a pulse & datacom transformer with 1 function and an isolation voltage of 1500V. It has an inductance of 350uH and is suitable for applications such as 10/100 BASE-TX Ethernet.
TG110-RPE5N5LF
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; Application: 10/100 BASE-TX; ETHERNET; Additional Features: HEIGHT DIMENSION INCLUDES TERMINAL ALSO; Minimum Operating Temperature: -40 Cel;
TG110-RP55N5RL
TG110-RP55N5RL by Halo Electronics is a Pulse & Datacom Transformer with 2 primary and secondary windings. It offers an isolation voltage of 1500V, insertion loss of 1.1dB, and inductance of 350uH. Ideal for applications like 10/100 BASE-TX Ethernet due to its compact dimensions (L12.7xB7.11xH6.35 mm) and surface mount feature, operating b/w temperatures of 0-70°C at frequencies up to 100000 KHz.
TG110-S055N2RL
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN; UL; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Minimum Operating Frequency: 100 KHz; Maximum Operating Temperature: 70 Cel;
TG110-S055N2LF
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN; UL; Terminal Finish: MATTE TIN OVER NICKEL; Height: 5.08 mm; Minimum Operating Temperature: 0 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved