Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TG110-S050N2TR by Halo Electronics is a DATACOM TRANSFORMER with 1500V isolation voltage, 350uH inductance, and IEEE approval. Ideal for 10/100 BASE-TX and ATM applications, it operates b/w 0-70°C and has a compact size of 5.08x7.112x12.7mm for surface mounting.TR packaging method ensures secure handling.
Median Price
-
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Bristol Electronics
1+ parts
100+ parts
1k+ parts
10k+ parts
Prism Electronics
Legend Electronics Inc.
Vyrian
Semi Source
Connector Distribution Corp
Right Parts Inc.
ACDS - Activité Composants Distribution Service
Nova Conductors
PC Components Company LLC
Corohmni
$2.139
Aztec Data Supply Inc.
$5.940
AZTECH Wire
$16.947
Authorized Procurement Solutions
Argo Parts USA
Perfect Parts
Continental Prestige Electronics
Bastille Electronics
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
Kepictronics
Having IEEE approval ensures that the product meets industry standards for quality and performance.
High isolation voltage helps in preventing electrical interference and ensures safe operation of the device.
The inductance value of 350 uH allows for efficient energy transfer and signal processing within the transformer.
Designed specifically for applications like 10/100 BASE-TX and ATM, making it a suitable choice for networking and data communication systems.
With a high maximum operating temperature of 70°C, the transformer can withstand demanding environmental conditions without overheating.
The surface mount design of the transformer allows for easy and secure installation on PCBs, saving space and simplifying assembly.
Pulse & Datacom Transformers TG110-S050N2TR attributes and parameters. Explore more Pulse & Datacom Transformers devices from Halo Electronics
Additional Features:
Application:
Approvals (V):
Height:
Isolation Voltage:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
TG110-S050N2TR Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HALO’s mission is to provide the highest quality products at a competitive price while providing “best-in-class” customer service. HALO is a privately held company which allows flexibility and quick decision making to best serve our customers changing demands. HALO designs and manufactures a broad line of communication and power magnetics. Its products are found across the world in markets from consumer devices to critical medical and high reliability applications. Headquartered in Las Vegas, NV HALO has sales locations in most major markets with the bulk of the R&D done in the United States and China. HALO’s product applications include networking and telecom equipment, industrial control, medical systems, automotive, security, and many more.
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Mde Semiconductor
Daco Semiconductor
LM317LMX/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Dc Components
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
Bytesonic Electronics
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
Fairchild Semiconductor
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
H1012NL
Pulse Electronics
H1012NL by Pulse Electronics is a DATACOM TRANSFORMER with 1CT:1CT Turns Ratio, 1500V Isolation Voltage, and 1dB Insertion Loss. It is designed for 10/100 BASE-T applications, featuring IEEE approvals and operating temperatures from 0 to 70°C.
1621
Newport Components
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1600; Application: BUFFER DRIVE; Turns Ratio (Np:Ns): 1:2; Width: 6.86 mm;
TG110-RPE5N5LF
Halo Electronics
TG110-RPE5N5LF by Halo Electronics is a DATACOM TRANSFORMER with 1500V isolation voltage. Measuring L12.7xB7.11xH6.35 (mm), it operates b/w -40 to 85 °C, ideal for 10/100 BASE-TX Ethernet applications. Features matte tin terminal finish and surface mounting feature.
750311422
Wuerth Elektronik & Kg
The Wurth Elektronik 750311422 is a Datacom Transformer with 2 primary windings, 1500V isolation voltage, and 50uH inductance. It has dimensions of L17.75xB13.46xH12.7 mm and is suitable for applications requiring a max operating temperature of 125°C, output current of 4A, and turns ratio of 5:1.
H5008NL
H5008NL by Pulse Electronics is a Datacom Transformer with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and inductance of 350uH. Ideal for applications like 1000BASE-T, this transformer operates b/w -40°C to +70°C with dimensions of L15.24xB13.64xH5.47mm and a max frequency of 100000KHz.
750813134
Wurth Elektronik 750813134 is a DATACOM TRANSFORMER with 4500V isolation voltage, 600uH inductance, and 8:1 turns ratio. Ideal for pulse & datacom applications due to its compact L16.5xB18.0xH18.0 (mm) size and through-hole mounting feature. Operating range from -40°C to 125°C makes it versatile for various environments.
78250MC
C&d Technologies
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 78250; Terminal Finish: Tin (Sn); Width: 8.89 mm; Maximum Operating Temperature: 85 Cel;
749013010
Wurth Elektronik 749013010 is a UL approved transformer with 1500V isolation voltage, 1.2dB insertion loss, and primary inductance of 350uH. Ideal for LAN applications like 100 BASE-T, it operates b/w 0-70°C and features surface mounting on tape & reel packaging.
96046123309
Littelfuse
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Minimum Operating Temperature: -40 Cel; Isolation Voltage: 1500 V; Turns Ratio (Np:Ns): 1:2; Width: 23.4 mm;
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1600; Maximum Operating Temperature: 70 Cel; Turns Ratio (Np:Ns): 1:2; Minimum Operating Temperature: 0 Cel;
78613/3C
Murata Manufacturing
Murata Manufacturing's 78613/3C is a pulse transformer with 1000V isolation voltage, 200uH primary inductance, and 6 V-us min ET product. It is used for datacom applications due to its compact size (6.35mm x 9mm x 9.52mm) and through-hole mounting feature.
ALT4532V-201-T001
TDK
TDK's ALT4532V-201-T001 is a DATACOM TRANSFORMER for LAN applications with 200uH inductance. It has AEC-Q200 approval, operates b/w -40 to 105 °C, and features 1CT:1CT turns ratio. Ideal for 10/100/1000 BASE-T networks, it is compact at L4.5xB3.2xH2.9 mm and mounts easily on surfaces.
78604/3C
Murata Manufacturing's 78604/3C is a pulse transformer with 1000V isolation voltage, 200uH inductance, and 6V-us min ET product. Ideal for datacom applications, it features a 2:1 turns ratio and through-hole mounting for efficient performance in compact spaces.
HX1224CNL
HX1224CNL by Pulse Electronics is a Datacom Transformer with 4000V isolation voltage, 350uH primary inductance, and 1:1 turns ratio. It is ideal for surface mount applications in data communication and networking equipment due to its compact size and temperature range of -40°C to 85°C.
HM2102NLT
HM2102NLT by Pulse Electronics is a DATACOM TRANSFORMER with 2 functions and an isolation voltage of 4300V. With inductance of 450uH, it operates b/w -40 to 125 °C, making it ideal for AEC-Q200 approved applications requiring high voltage isolation.
T4032
T4032 by Pulse Electronics is a DATACOM TRANSFORMER with 1500V isolation voltage, 11900uH inductance, and 1.25CS:1CT turns ratio. It is designed for ISDN applications, featuring dimensions of L13.46xB13.11xH12.07mm and surface mounting feature on TRAY packing method.
TG100-MOST15N2LF
TG100-MOST15N2LF by Halo Electronics is a Pulse & Datacom Transformer with 1500V isolation voltage, 250uH inductance, and dimensions of 12.7mm x 7.11mm x 5.08mm. Ideal for SIGNAL applications, it operates b/w -40°C to 105°C temperature range and features a turns ratio of 1CT:1.5CT; 1CT:1CT for versatile use in data communication setups.
HM1188NLT
HM1188NLT by Pulse Electronics is a DATACOM TRANSFORMER with 1:1 Turns Ratio, 1500V Isolation Voltage, and 350uH Primary Inductance. It is AEC-Q200 approved for automotive applications, operates b/w -40°C to 105°C, and has compact dimensions suitable for surface mount installations.
HX1234NL
HX1234NL by Pulse Electronics is a DATACOM TRANSFORMER with 1CT:1CT Turns Ratio, 1500V Isolation Voltage, and 1dB Insertion Loss. It is designed for 10/100 BASE-TX applications, operates b/w -40 to 85 °C, and has dimensions of L28.58xB12.19xH7.11 mm for surface mount assembly.
ALANS100X1-1E10LT
Abracon
ALANS100X1-1E10LT by Abracon is a DATACOM TRANSFORMER with 2500V isolation voltage, 350uH inductance, and IEEE approval. Ideal for LAN, 10/100 BASE-TX, and Ethernet applications due to its compact size (5x11.7x14.8mm) and surface mounting feature. Operating temperature range from -55°C to 125°C ensures reliable performance in various environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TG110-E050N5LFTR
TG110-E050N5LFTR by Halo Electronics is a DATACOM TRANSFORMER with 1500V isolation voltage, 1CT:1CT turns ratio, and dimensions of L12.7xB7.11xH6.35 mm. Ideal for 10/100 BASE-TX applications, it operates b/w -40 to 85°C and features surface mounting method.
TG110-E050N5RL
TG110-E050N5RL by Halo Electronics is a Pulse & Datacom Transformer with 1500V isolation voltage. It has 2 functions, 0.4uH primary inductance, and 1CT:1CT turns ratio. Ideal for applications like 10/100 BASE-TX and ETHERNET due to its compact dimensions of L12.7xB7.11xH6.35 mm and surface mounting feature.
TG110-S050N2RLTR
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: 0 Cel; Turns Ratio (Np:Ns): 1CT:1CT; 1CT:1CT; Minimum Operating Frequency: 100 KHz; Packing Method: TAPE & REEL;
TG110-E050N5LF
Halo Electronics' TG110-E050N5LF is a DATACOM TRANSFORMER with 1500V isolation voltage, 0.4uH inductance, and 1CT:1CT turns ratio. Ideal for 10/100 BASE-TX and ETHERNET applications, it operates b/w -40 to 85 °C with dimensions of L12.7xB7.11xH6.35 mm for surface mount installation.
TG110-S050N2LF
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN; UL; Terminal Finish: MATTE TIN OVER NICKEL; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 70 Cel;
TG110-S050N2RL
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN; UL; Terminal Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; Dimensions: L12.7XB7.112XH5.08 (mm); Minimum Operating Frequency: 100 KHz;
TG110-S050N2LFTR
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Isolation Voltage: 1500 V; No. of Functions: 2; Turns Ratio (Np:Ns): 1CT:1CT; 1CT:1CT; Height: 5.08 mm;
TG110-E050N5RLTR
TG110-E050N5RLTR by Halo Electronics is a DATACOM TRANSFORMER for 10/100 BASE-TX Ethernet applications. It offers 2 functions with an isolation voltage of 1500V and primary inductance of 350uH. This surface mount transformer operates b/w -40°C to 85°C, measuring L12.7xB7.11xH6.35mm in dimensions.
TG110-S050N2
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN LEAD; Dimensions: L12.7XB7.11XH5.08 (mm); Length: 12.7 mm; Width: 7.11 mm;
TG110-E055N5RL
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN; UL; Terminal Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; Isolation Voltage: 1500 V; Inductance (Primary): .4 uH;
TG111-E12NYNLF
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Additional Features: HEIGHT DIMENSION INCLUDES TERMINAL ALSO; Length: 14.22 mm; Minimum Operating Temperature: -40 Cel; Height: 8.64 mm;
TG110-E055N5RLTR
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN; UL; Inductance (Primary): .4 uH; Height: 6.35 mm; Maximum Operating Temperature: 85 Cel;
TG110-AEX50N5LF
TG110-AEX50N5LF by Halo Electronics is a pulse & datacom transformer with 1 function and an isolation voltage of 1500V. It has an inductance of 350uH and is suitable for applications such as 10/100 BASE-TX Ethernet.
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; Application: 10/100 BASE-TX; ETHERNET; Additional Features: HEIGHT DIMENSION INCLUDES TERMINAL ALSO; Minimum Operating Temperature: -40 Cel;
TG110-RP55N5RL
TG110-RP55N5RL by Halo Electronics is a Pulse & Datacom Transformer with 2 primary and secondary windings. It offers an isolation voltage of 1500V, insertion loss of 1.1dB, and inductance of 350uH. Ideal for applications like 10/100 BASE-TX Ethernet due to its compact dimensions (L12.7xB7.11xH6.35 mm) and surface mount feature, operating b/w temperatures of 0-70°C at frequencies up to 100000 KHz.
TG110-S055N2RL
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN; UL; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Minimum Operating Frequency: 100 KHz; Maximum Operating Temperature: 70 Cel;
TG110-S055N2LF
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): EN; UL; Terminal Finish: MATTE TIN OVER NICKEL; Height: 5.08 mm; Minimum Operating Temperature: 0 Cel;
TG110-S055N2TR
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Insertion Loss: 1.1 dB; Dimensions: 12.7mm x 7.11mm x 5.08mm; Application: 10/100 BASE-T; Length: 12.7 mm;
TG110-S055N2
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Operating Frequency: 100 KHz; No. of Winding (Primary): 2; No. of Winding (Secondary): 22; Height: 5.08 mm;
TG110-S055N2RLTR
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Dimensions: L12.7XB7.11XH5.08 (mm); Height: 5.08 mm; Packing Method: TR; Turns Ratio (Np:Ns): 1CT:1CT; 1CT:1CT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved