Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TNY286DG-TL by Power Integrations is a switching regulator with a max output current of 0.374 A and a max switching frequency of 140 kHz. It is commonly used in applications requiring small outline package style and buck-boost switcher configuration.
Median Price
$0.740
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.611
1k+ parts
$0.552
10k+ parts
$0.493
DigiKey
$0.520
Newark
$0.762
$0.629
$0.536
-
Element14
$0.786
$0.648
$0.573
Future Electronics
$0.465
Elektronika Sales Private Limited
Farnell
$0.525
$0.447
$0.417
Ozdisan Elektronik
$0.481
Nova Conductors
$0.589
TME
$0.710
$0.655
Chip Stock
Vyrian
NAC Semi
$0.864
IBS Electronics
$0.690
Argo Parts USA
$0.571
Netroflash
$0.559
$0.547
Corohmni
Aztec Data Supply Inc.
$3.290
Infinite Electronics LLP (Excess)
Eastek
$0.880
Formix International (Excess)
GreenTree Electronics
Kepictronics
Lixinc
S.R.D Solutions
Authorized Procurement Solutions
Assy Fe
Continental Prestige Electronics
$0.684
$0.477
Futuretech Components
ChipstoGo Electronic ltd
The plastic/epoxy package body material enhances the durability and longevity of the switching regulator, making it a reliable choice for various applications.
The surface mount capability allows for easy integration onto circuit boards, making installation and assembly convenient and efficient.
The rectangular package shape offers compatibility with standard board layouts, ensuring easy placement and optimization of space.
With 7 terminals, this switching regulator provides versatile connectivity options, enabling flexible circuit design and functionality.
The small outline package style makes this switching regulator compact and suitable for applications with limited space constraints.
The maximum operating temperature of 125°C ensures reliable performance even in high-temperature environments.
The minimum operating temperature of -40°C guarantees the switching regulator's functionality in extreme cold conditions.
The matte tin terminal finish offers excellent solderability, facilitating a secure and stable connection between the switching regulator and other components.
The dual terminal position enables flexible circuit board layouts, allowing for increased design options and ease of connectivity.
The maximum seated height of 1.75 mm ensures a low-profile design, making this switching regulator suitable for compact electronic devices.
The 3.9 mm width renders the switching regulator space-efficient, enabling its integration into various electronic applications with limited board space.
Being a switching regulator, this product efficiently converts input voltage to the desired output voltage, providing stable and reliable power supply for electronic circuits.
With a nominal input voltage of 230 V, this switching regulator caters to a wide range of power supply requirements, making it suitable for different regions globally.
The 4.9 mm length ensures a compact form factor, enabling the switching regulator's seamless installation in space-restricted environments.
The high maximum switching frequency of 140 kHz allows for fast and efficient voltage regulation, minimizing power loss and ensuring optimal performance.
With a maximum output current of 0.374 A, this switching regulator can provide sufficient power to drive various electronic components and circuits.
The gull wing terminal form enables secure soldering and connection to circuit boards, ensuring reliable electrical contact and mechanical stability.
The buck-boost configuration of this switching regulator enables it to regulate both higher and lower input voltages, offering versatility in power supply applications.
The 1.27 mm terminal pitch provides compatibility with standard surface mount technology (SMT), simplifying the manufacturing and assembly processes.
With a minimum input voltage of 85 V, this switching regulator can effectively handle lower-power supply scenarios, making it adaptable to different voltage requirements.
The maximum input voltage of 265 V ensures the switching regulator's compatibility with a wide range of power supply sources, expanding its usability across various applications.
Switching Regulators & Controllers TNY286DG-TL attributes and parameters. Explore more Switching Regulators & Controllers devices from Power Integrations
Other IC type:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
TNY286DG-TL Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - TR Moisture Pkg Chg 2/Jul/2021
Power Integrations, Inc., is a leading innovator in semiconductor technologies for high-voltage power conversion. Our products are key building blocks in the clean-power ecosystem, enabling the generation of renewable energy as well as the efficient transmission and consumption of power in a vast range of applications including appliances, mobile devices, computers and countless industrial applications. Energy-saving technologies such as our PowiGaN™ gallium-nitride technology and our EcoSmart™ energy-efficiency technology prevent billions of kilowatt-hours of energy waste each year, while our highly integrated chips save billions of electronic components each year. Reflecting the environmental benefits of our products, Power Integrations' stock is a component of clean-technology stock indices sponsored by Cleantech Group LLC and Clean Edge, and our Green Room provides a comprehensive guide to energy-efficiency standards around the world.
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
NE555D
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
TPS54160ADRCT
TPS54160ADRCT by Texas Instruments is a switching regulator with a max output current of 1.5A, operating temperature range of -40 to 125°C, and PWM control mode. Ideal for automotive applications due to its compact size, high efficiency, and wide input voltage range from 3.5V to 60V.
TPS62097RWKR
TPS62097RWKR by Texas Instruments is a switching regulator with 2A output current, 2500kHz max switching frequency, and 3.6V nominal input voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact chip carrier package style.
MC34063AD
MC34063AD by Texas Instruments is a switching regulator with VOLTAGE-MODE control, operating at 0-70°C. It has a 5V nominal input voltage, 1.25-40V output voltage range, and supports up to 100 kHz switching frequency. Ideal for applications requiring efficient power conversion in compact spaces due to its small outline package and dual terminal position.
LM3150MH/NOPB
National Semiconductor
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC33063AP1G
MC33063AP1G by Onsemi is a switching regulator with 8 terminals, operating b/w -40 to 85°C. It supports voltage-mode control, PWM technique, and buck-boost configuration. Ideal for industrial applications requiring a max output current of 1.5A at frequencies up to 100kHz.
L5973AD
STMicroelectronics
L5973AD by STMicroelectronics is a voltage-mode switching regulator with 2.3A output current, suitable for buck configuration applications. It operates within a wide input voltage range of 4.4V to 36V and features pulse width modulation control technique. This small outline IC in gull wing terminal form is ideal for compact electronic devices requiring efficient power management.
TPS61200DRCRG4
TPS61200DRCRG4 by Texas Instruments is a switching regulator with max output voltage of 5.5V, operating temp range -40 to 85°C, and max output current of 1.5A. Ideal for battery charge control applications due to boost switcher config, PWM control mode, and compact square package design.
LM2576HVT-ADJ
First Components International
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-220; Package Shape: RECTANGULAR; Surface Mount: NO;
TPS61222MDCKTEP
TPS61222MDCKTEP by Texas Instruments is a switching regulator with 6 terminals, operating at -55 to 125°C. It has a boost switcher config, hysteric current mode control technique, and max freq of 2MHz. Ideal for battery charge controllers in military-grade applications due to its compact size and high efficiency.
LMR14206XMK/NOPB
LMR14206XMK/NOPB by Texas Instruments is a switching regulator with 6 terminals, operating temperature range of -40 to 125°C, and output voltage range from 0.765V to 34V. It is designed for automotive applications, featuring a compact rectangular package with very thin profile suitable for surface mount assembly. The control mode is current-mode PWM with max output current of 0.6A and switching frequency up to 1500kHz.
TPS62933PDRLR
TPS62933PDRLR by Texas Instruments is a switching regulator with 8 terminals, operating b/w -40 to 150°C. It offers a max output voltage of 22V and current up to 3A, using pulse width modulation for control. Ideal for applications requiring efficient power conversion in compact spaces.
MC33063AVDG
Shenzhen Changyuntong Ic Design
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS55340PWPR
TPS55340PWPR by Texas Instruments is a switching regulator with 14 terminals, operating b/w -40 to 150°C. It offers a min output voltage of 3V and max output current of 7.75A, suitable for automotive applications due to its compact size and pulse width modulation control technique.
LM5017SDX/NOPB
LM5017SDX/NOPB by Texas Instruments is a switching regulator with max output voltage of 90V, max output current of 0.6A, and max switching frequency of 1MHz. Ideal for automotive applications due to its temp grade and small outline package style.
TLV62568DBVR
TLV62568DBVR by Texas Instruments is a 5-terminal switching regulator with PWM control, operating at -40 to 125°C. It offers a max output current of 1A and frequency of 1500kHz, suitable for automotive applications requiring low profile design and high efficiency power conversion.
LM5007SDX/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
ST1S14PHR
ST1S14PHR by STMicroelectronics is a switching regulator with 8 terminals, operating b/w -40 to 125 °C. It has a max output current of 5.2 A and supports pulse width modulation control technique. Ideal for automotive applications due to its compact size (4.9mm x 3.9mm) and high switching frequency of up to 1000 kHz.
TPS62111RSATG4
TPS62111RSATG4 by Texas Instruments is a voltage-mode switching regulator with a max output current of 2.4A and a max switching frequency of 1100kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring stable power conversion in compact spaces. The chip carrier package style with very thin profile and no-lead terminal form enhances its versatility for use in space-constrained designs.
LM3478MM
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
LM5146QRGYTQ1
LM5146QRGYTQ1 by Texas Instruments is a switching controller with a max output voltage of 60V and max output current of 30A. Operating in voltage-mode control technique, it has a wide input voltage range from 5.5V to 100V, making it suitable for automotive applications requiring high power efficiency. With a compact chip carrier package style and pulse width modulation, this device offers precise regulation in a small form factor for various power management needs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TNY268PN
Power Integrations
TNY268PN by Power Integrations is a switching regulator with max output current of 0.88A and max operating temp of 125°C. It features pulse width modulation control technique, single switcher config, and is ideal for automotive applications due to its temperature grade.
TNY280PN
TNY280PN by Power Integrations is a switching regulator with max output current of 0.802A and max operating temp of 125°C. Ideal for automotive applications, it operates at a frequency of 140kHz with control mode in current-mode for efficient power management.
TNY280GN-TL
TNY280GN-TL by Power Integrations is a switching regulator with a max output current of 0.818A and a control mode of current-mode, suitable for automotive applications. It operates at temperatures ranging from -40 to 125°C, with a max switching frequency of 140kHz. This small outline package has 7 terminals and uses pulse width modulation for control.
TNY278PN
TNY278PN by Power Integrations is a switching regulator with 7 terminals, operating temperature range of -40 to 125°C, and max output current of 0.588A. Ideal for automotive applications, it utilizes pulse width modulation control technique and has a single switcher configuration with a max switching frequency of 140kHz.
TNY278GN-TL
TNY278GN-TL by Power Integrations is a switching regulator with current-mode control, operating b/w -40 to 125°C. It has a max output current of 0.6A and operates at a max switching frequency of 140kHz. Ideal for automotive applications due to its small outline package style and pulse width modulation control technique.
TNY288DG-TL
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TNY266PN
TNY266PN by Power Integrations is a switching regulator with max output current of 0.56A and max operating temp of 125°C. Ideal for automotive applications, it features a control mode of current-mode and operates at a max switching frequency of 140kHz.
TNY274GN-TL
TNY274GN-TL by Power Integrations is a switching regulator with 7 terminals, operating temperature range of -40 to 125°C, and max output current of 0.273A. Ideal for automotive applications, it features pulse width modulation control technique and single switcher configuration with a max switching frequency of 140kHz.
TNY290PG
TNY290PG by Power Integrations is a switching regulator with 7 terminals and a max output current of 0.802A. It operates b/w -40 to 125°C, making it suitable for various applications such as buck-boost switcher configurations in electronic devices requiring input voltages ranging from 85V to 265V.
TNY284DG-TL
TNY284DG-TL by Power Integrations is a switching regulator with 7 terminals, operating temperature range of -40 to 125°C, and max output current of 0.267A. It is ideal for automotive applications due to its small outline package style and buck-boost switcher configuration. With a wide input voltage range from 85V to 265V, it offers efficient power management in various electronic systems.
TNY277GN-TL
TNY277GN-TL by Power Integrations is a switching regulator with current-mode control, operating b/w -40 to 125°C. It has a max output current of 0.491A and operates at a max frequency of 140kHz. Ideal for automotive applications due to its small outline package and pulse width modulation control technique.
TNY280GN
TNY268GN-TL
TNY279PN
TNY279PN by Power Integrations is a switching regulator with 7 terminals, operating b/w -40 to 125°C. It features a max output current of 0.695A and operates at a frequency of up to 140kHz. Ideal for automotive applications due to its compact size and pulse width modulation control mode.
TNY264PN
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TNY279GN
TNY267PN
TNY267PN by Power Integrations is a switching regulator with max output current of 0.72A and max operating temp of 125°C. Ideal for automotive applications, it features a single switcher config and operates at a max frequency of 140kHz.
TNY274PN
TNY277PN
TNY286DG
SWITCHING REGULATOR; No. of Terminals: 7; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Input Voltage: 265 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved