Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TNY279PN by Power Integrations is a switching regulator with 7 terminals, operating b/w -40 to 125°C. It features a max output current of 0.695A and operates at a frequency of up to 140kHz. Ideal for automotive applications due to its compact size and pulse width modulation control mode.
Median Price
$1.440
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Farnell
1+ parts
$1.240
100+ parts
$1.030
1k+ parts
$0.847
10k+ parts
$0.831
Mouser Electronics
$1.190
$0.977
$0.864
DigiKey
$1.010
Element14
$1.900
$1.510
-
Newark
$2.590
$1.650
$1.380
Elektronika Sales Private Limited
Avnet
Future Electronics
$0.915
$0.865
$0.830
RS (Exports)
$1.397
$1.359
Nova Conductors
$1.100
TME
$1.340
$1.210
Chip Stock
Vyrian
Velocity Electronics
Infinite Electronics LLP
IBS Electronics
$1.417
$1.325
NAC Semi
$1.410
Schukat
$0.911
Micros
$1.584
$1.550
SPM Sales
ACDS - Activité Composants Distribution Service
LittleDiode
LWI Electronics Inc
Electronics Depot
Argo Parts USA
Netroflash
Advanced Electronics
$1.122
Continental Prestige Electronics
$2.110
$1.250
$0.908
Corohmni
$21.983
Aztec Data Supply Inc.
$24.420
Metaverse IC Inc.
Infinite Electronics LLP (Excess)
Kepictronics
GreenTree Electronics
Eastek
S.R.D Solutions
Authorized Procurement Solutions
QUARKTWIN TECHNOLOGY LTD
Lixinc
iodParts Technologies Inc.
$0.768
ChipstoGo Electronic ltd
The use of plastic/epoxy material ensures durability and reliability for long-term usage.
The rectangular shape provides compactness and ease of integration into electronic systems.
With 7 terminals, this product offers flexibility in connecting to external components.
The in-line package style allows for easy installation and space-saving design.
The high operating temperature range makes it suitable for various industrial applications.
Current-mode control technology ensures stable and efficient power regulation.
The wide temperature range allows for operation in harsh environments.
The matte tin finish provides good electrical conductivity and solderability.
Dual terminal position offers redundancy and improved reliability in connectivity.
The compact width makes it suitable for space-constrained applications.
The switching regulator design enables high efficiency and low power consumption.
The nominal input voltage requirement ensures compatibility with various power sources.
The optimal length allows for easy placement on circuit boards.
Automotive-grade temperature rating ensures reliability in automotive applications.
High switching frequency enables fast response and precise control of output voltage.
Low supply current consumption helps in reducing overall power consumption.
The high maximum output current capability makes it suitable for powering various components.
Through-hole terminals offer mechanical strength and secure connections.
Pulse width modulation control technique provides efficient and accurate voltage regulation.
The single switcher configuration simplifies design and reduces system complexity.
The standard terminal pitch allows for easy PCB layout and assembly.
The low minimum input voltage requirement enables operation with low-power sources.
The high maximum input voltage tolerance ensures compatibility with various power sources.
Switching Regulators & Controllers TNY279PN attributes and parameters. Explore more Switching Regulators & Controllers devices from Power Integrations
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification:
Sub-Category:
Maximum Supply Current (Isup):
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
TNY279PN Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Dev Site Add 30/Jul/2020
Power Integrations, Inc., is a leading innovator in semiconductor technologies for high-voltage power conversion. Our products are key building blocks in the clean-power ecosystem, enabling the generation of renewable energy as well as the efficient transmission and consumption of power in a vast range of applications including appliances, mobile devices, computers and countless industrial applications. Energy-saving technologies such as our PowiGaN™ gallium-nitride technology and our EcoSmart™ energy-efficiency technology prevent billions of kilowatt-hours of energy waste each year, while our highly integrated chips save billions of electronic components each year. Reflecting the environmental benefits of our products, Power Integrations' stock is a component of clean-technology stock indices sponsored by Cleantech Group LLC and Clean Edge, and our Green Room provides a comprehensive guide to energy-efficiency standards around the world.
1N4148
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
PIC18F4550T-I/PT
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
Vishay Intertechnology
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Secos
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
LM2585S-ADJ/NOPB
LM2585S-ADJ/NOPB by Texas Instruments is a switching regulator with 5 terminals, operating temperature range of -40 to 125°C, and output current up to 7A. Ideal for automotive applications, it offers a wide input voltage range from 4V to 40V and supports pulse width modulation control technique at a max frequency of 115kHz.
LM5085MME/NOPB
LM5085MME/NOPB by Texas Instruments is a switching regulator with 10A output current, 75V max output voltage, and 1000 kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact thin profile package design.
LMZ23605TZE/NOPB
National Semiconductor
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Moisture Sensitivity Level (MSL): 3; Control Mode: CURRENT-MODE; Package Body Material: PLASTIC/EPOXY;
LM3150MH/NOPB
LM3150MH/NOPB by Texas Instruments is a switching controller with 14 terminals, operating temperature range of -40 to 125°C, and max output current of 12A. It is ideal for automotive applications due to its hysteric current mode control technique and wide input voltage range from 6V to 42V. The compact rectangular package with small outline and heat sink makes it suitable for space-constrained designs.
PTPSM84209RKHT
SWITCHING REGULATOR;
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
LM5008MMX/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
LM22675MR-5.0/NOPB
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-30 Code: R-PDSO-G8;
TPS61200DRCR
TPS61200DRCR by Texas Instruments is a switching regulator with a nominal input voltage of 1.2V and max output voltage of 5.5V, suitable for battery charge control applications. It operates in boost configuration with a max output current of 1.5A and features pulse width modulation control technique, making it ideal for industrial use at temperatures ranging from -40 to 85°C.
MC34063ABD-TR
STMicroelectronics
MC34063ABD-TR by STMicroelectronics is a voltage-mode switching regulator with 1.5A output current, suitable for industrial applications. It operates b/w -40 to 85°C, with a max input voltage of 40V and min of 3V. The small outline package has dual terminals and Gull Wing form factor, making it ideal for compact designs.
LM2594MX-3.3/NOPB
LM2594MX-3.3/NOPB by Texas Instruments is a voltage-mode switching regulator with a 3.3V output, suitable for automotive applications. It operates b/w -40 to 125°C, handles up to 0.5A output current, and supports input voltages from 4.5V to 40V. This small outline IC uses pulse width modulation control technique at a max frequency of 173kHz for efficient buck conversion.
LM2674M-5.0
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2674MX-3.3/NOPB
TPS552882RPMR
TPS552882RPMR by Texas Instruments is a switching regulator with 26 terminals, operating temperature range of -40 to 125°C. It features a current-mode control mode, pulse width modulation technique, and buck-boost switcher configuration. Ideal for automotive applications due to its compact chip carrier package style and wide input voltage range of 2.7V to 36V.
LM2576T-ADJ
Semtech
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-220; Package Shape: RECTANGULAR; Surface Mount: NO;
NCP3170ADR2G
NCP3170ADR2G by Onsemi is a current-mode switching regulator with 3A output, 550kHz max frequency, and 85°C operating temp. Ideal for industrial applications requiring efficient power control in compact spaces.
MC34063AP
MC34063AP by Texas Instruments is a switching regulator with 8 terminals, VOLTAGE-MODE control mode, and BUCK-BOOST switcher config. It operates b/w 0 to 70 °C with input voltage range of 3-40 V. Ideal for applications requiring a max output current of 1.5 A at up to 100 kHz switching frequency.
LM2733XMFX/NOPB
LM2733XMFX/NOPB by Texas Instruments is a switching regulator with 5 terminals, operating temperature range of -40 to 125°C, and output voltage range from 3V to 40V. It is ideal for automotive applications due to its small size (2.92mm x 1.6mm) and high max output current of 1.5A at a frequency of up to 1850kHz using pulse width modulation control technique.
LMZM23600SILT
LMZM23600SILT by Texas Instruments is a switching regulator with 10 terminals, operating temperature range of -40 to 125°C, and output voltage up to 15V. Ideal for automotive applications, it features pulse width modulation control mode and buck-boost switcher configuration. With a compact rectangular package style, it is surface mountable and suitable for various microelectronic assemblies.
UCC28C45DR
UCC28C45DR by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature grade range from -40°C to 105°C, making it suitable for various power management applications requiring precise control and efficiency. The package style is small outline with dual terminals, ideal for compact designs where space is limited.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TNY268PN
Power Integrations
TNY268PN by Power Integrations is a switching regulator with max output current of 0.88A and max operating temp of 125°C. It features pulse width modulation control technique, single switcher config, and is ideal for automotive applications due to its temperature grade.
TNY280PN
TNY280PN by Power Integrations is a switching regulator with max output current of 0.802A and max operating temp of 125°C. Ideal for automotive applications, it operates at a frequency of 140kHz with control mode in current-mode for efficient power management.
TNY280GN-TL
TNY280GN-TL by Power Integrations is a switching regulator with a max output current of 0.818A and a control mode of current-mode, suitable for automotive applications. It operates at temperatures ranging from -40 to 125°C, with a max switching frequency of 140kHz. This small outline package has 7 terminals and uses pulse width modulation for control.
TNY278PN
TNY278PN by Power Integrations is a switching regulator with 7 terminals, operating temperature range of -40 to 125°C, and max output current of 0.588A. Ideal for automotive applications, it utilizes pulse width modulation control technique and has a single switcher configuration with a max switching frequency of 140kHz.
TNY278GN-TL
TNY278GN-TL by Power Integrations is a switching regulator with current-mode control, operating b/w -40 to 125°C. It has a max output current of 0.6A and operates at a max switching frequency of 140kHz. Ideal for automotive applications due to its small outline package style and pulse width modulation control technique.
TNY288DG-TL
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TNY266PN
TNY266PN by Power Integrations is a switching regulator with max output current of 0.56A and max operating temp of 125°C. Ideal for automotive applications, it features a control mode of current-mode and operates at a max switching frequency of 140kHz.
TNY274GN-TL
TNY274GN-TL by Power Integrations is a switching regulator with 7 terminals, operating temperature range of -40 to 125°C, and max output current of 0.273A. Ideal for automotive applications, it features pulse width modulation control technique and single switcher configuration with a max switching frequency of 140kHz.
TNY290PG
TNY290PG by Power Integrations is a switching regulator with 7 terminals and a max output current of 0.802A. It operates b/w -40 to 125°C, making it suitable for various applications such as buck-boost switcher configurations in electronic devices requiring input voltages ranging from 85V to 265V.
TNY284DG-TL
TNY284DG-TL by Power Integrations is a switching regulator with 7 terminals, operating temperature range of -40 to 125°C, and max output current of 0.267A. It is ideal for automotive applications due to its small outline package style and buck-boost switcher configuration. With a wide input voltage range from 85V to 265V, it offers efficient power management in various electronic systems.
TNY277GN-TL
TNY277GN-TL by Power Integrations is a switching regulator with current-mode control, operating b/w -40 to 125°C. It has a max output current of 0.491A and operates at a max frequency of 140kHz. Ideal for automotive applications due to its small outline package and pulse width modulation control technique.
TNY280GN
TNY268GN-TL
TNY264PN
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TNY279GN
TNY286DG-TL
TNY286DG-TL by Power Integrations is a switching regulator with a max output current of 0.374 A and a max switching frequency of 140 kHz. It is commonly used in applications requiring small outline package style and buck-boost switcher configuration.
TNY267PN
TNY267PN by Power Integrations is a switching regulator with max output current of 0.72A and max operating temp of 125°C. Ideal for automotive applications, it features a single switcher config and operates at a max frequency of 140kHz.
TNY274PN
TNY277PN
TNY279PG
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved