Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TNY280GN-TL by Power Integrations is a switching regulator with a max output current of 0.818A and a control mode of current-mode, suitable for automotive applications. It operates at temperatures ranging from -40 to 125°C, with a max switching frequency of 140kHz. This small outline package has 7 terminals and uses pulse width modulation for control.
Median Price
$1.710
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$1.410
1k+ parts
$1.247
10k+ parts
-
Mouser Electronics
$1.200
$1.170
Newark
$1.760
$1.450
EBV Elektronik
Future Electronics
$1.100
$1.080
Farnell
$1.478
$1.324
$1.271
Elektronika Sales Private Limited
Element14
$2.000
$1.700
Nova Conductors
$1.480
TME
$1.580
$1.390
$1.290
Maritex
Vyrian
Chip Stock
IBS Electronics
$1.557
$1.529
NAC Semi
$2.200
Goldney Electronics S.L.
Schukat
$1.127
ABC Electronics Ltd.
DF Sales Co.
ComSIT Distribution GmbH
Ack Elektronik San.Tic.Ltd.Sti
Sensible Micro Corp
Prism Electronics
LWI Electronics Inc
Martec Srl
Continental Prestige Electronics
Argo Parts USA
Netroflash
Advanced Electronics
$1.568
$1.427
$1.286
Aztec Data Supply Inc.
$8.700
Corohmni
$12.822
Eastek
Kepictronics
S.R.D Solutions
Infinite Electronics LLP (Excess)
GreenTree Electronics
Futuretech Components
Authorized Procurement Solutions
This material is lightweight and durable, making the product suitable for various applications while also ensuring reliability.
Being surface mountable allows for easy and efficient installation onto circuit boards, saving space and simplifying assembly processes.
Current-mode control helps in achieving a stable and efficient power conversion, improving overall performance and reliability of the product.
The specific input voltage requirement ensures compatibility with devices operating within this range, making it a suitable choice for various applications.
With a high maximum output current capability, this product can power a range of components effectively, making it versatile and suitable for various applications.
Switching Regulators & Controllers TNY280GN-TL attributes and parameters. Explore more Switching Regulators & Controllers devices from Power Integrations
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
TNY280GN-TL Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - PCN-23144 4/25/23
PCN Packaging - TR Moisture Pkg Chg 2/Jul/2021
Power Integrations, Inc., is a leading innovator in semiconductor technologies for high-voltage power conversion. Our products are key building blocks in the clean-power ecosystem, enabling the generation of renewable energy as well as the efficient transmission and consumption of power in a vast range of applications including appliances, mobile devices, computers and countless industrial applications. Energy-saving technologies such as our PowiGaN™ gallium-nitride technology and our EcoSmart™ energy-efficiency technology prevent billions of kilowatt-hours of energy waste each year, while our highly integrated chips save billions of electronic components each year. Reflecting the environmental benefits of our products, Power Integrations' stock is a component of clean-technology stock indices sponsored by Cleantech Group LLC and Clean Edge, and our Green Room provides a comprehensive guide to energy-efficiency standards around the world.
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
1552200168
Molex
WIRE AND CABLE;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Onsemi
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
1N4148
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Taitron Components
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
New Jersey Semiconductor Products
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
Changzhou Starsea Electronics
LM3485MMX/NOPB
Texas Instruments
LM3485MMX/NOPB by Texas Instruments is a switching controller with a voltage-mode control technique. It operates at a max output current of 4A and has a max output voltage of 35V, making it suitable for automotive applications. With a compact square package style and dual terminal position, it offers efficient power regulation in tight spaces.
LM2576HVS-5.0/NOPB
LM2576HVS-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 7.5A and a nominal output voltage of 5V, suitable for automotive applications. It operates in a buck configuration with a control technique of pulse width modulation, offering high efficiency and reliability in a small outline package style.
TPS560430XDBVR
TPS560430XDBVR by Texas Instruments is a switching regulator with a max output current of 0.6A and a max output voltage of 24V. It operates in buck configuration, supports pulse frequency modulation control technique, and has a small outline package style suitable for automotive applications.
UC3843BVD1R2G
UC3843BVD1R2G by Onsemi is a current-mode switching controller with max output current of 1A and max switching frequency of 500kHz. Ideal for industrial applications, it operates b/w -40 to 105°C, with input voltage range from 12-25V.
LMZ22005TZX/NOPB
LMZ22005TZX/NOPB by Texas Instruments is a switching regulator with 7 terminals, operating temperature range of -40 to 85°C, and output current up to 5A. Ideal for industrial applications, it offers a max output voltage of 6V and control mode in current-mode PWM for efficient power management. With a compact design and high switching frequency of 950kHz, it suits various electronic devices requiring stable power supply.
LM25011AQ1MYX/NOPB
National Semiconductor
Switching Regulator or Controllers; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Position: DUAL;
LM22675MRE-5.0/NOPB
LM22675MRE-5.0/NOPB by Texas Instruments is a VOLTAGE-MODE switching regulator with 1A output current, ideal for automotive applications. It operates b/w -40 to 125°C, supporting input voltages from 4.5V to 42V and providing a stable output of 5V at up to 500kHz switching frequency.
L5970D013TR
STMicroelectronics
L5970D013TR by STMicroelectronics is a voltage-mode switching regulator with a max output current of 2.25A and a max switching frequency of 280kHz. Ideal for automotive applications, it operates b/w -40 to 125°C, supports input voltages from 4.4V to 36V, and features pulse frequency modulation control technique.
TPS630701RNMT
TPS630701RNMT by Texas Instruments is a 15-terminal switching regulator with a max output current of 2A and a control mode of current-mode. It operates b/w -40 to 125°C, making it suitable for automotive applications requiring efficient power management in compact spaces.
TPS5410D
TPS5410D by Texas Instruments is a switching regulator with a max output current of 1A and a max input voltage of 36V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
LM5007SD/NOPB
LM5007SD/NOPB by Texas Instruments is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It offers a max output voltage of 73V and a max output current of 0.5A, making it ideal for automotive applications requiring efficient power management up to 800kHz switching frequency.
EN5322QI-T
Intel
EN5322QI-T by Intel is a voltage-mode switching regulator with 24 terminals, operating b/w -40 to 85°C. It has a max output current of 2A and operates at a frequency of up to 4MHz. Ideal for industrial applications requiring efficient power management in compact spaces.
TPS560430YDBVR
TPS560430YDBVR by Texas Instruments is a switching regulator with 0.6A output current, 1V min output voltage, and 2100kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design.
MC34063AP
MC34063AP by Texas Instruments is a switching regulator with 8 terminals, VOLTAGE-MODE control mode, and BUCK-BOOST switcher config. It operates b/w 0 to 70 °C with input voltage range of 3-40 V. Ideal for applications requiring a max output current of 1.5 A at up to 100 kHz switching frequency.
TPS40055PWPR
TPS40055PWPR by Texas Instruments is a voltage-mode switching controller with a max output current of 20A and a max output voltage of 35V. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various power management applications requiring high efficiency and precision control. The compact rectangular package style with gull wing terminals and push-pull switcher configuration enables space-saving designs in electronic devices.
LM2594MX-3.3/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2672M-5.0/NOPB
LM2672M-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 5V nominal output voltage, and 400kHz max switching frequency. It is ideal for automotive applications due to its small outline package style and wide operating temperature range (-40°C to 125°C).
MCP16331T-E/CHVAO
Microchip Technology
MCP16331T-E/CHVAO by Microchip is a switching regulator with 6 terminals, operating temp. range of -40 to 125°C, and max output current of 0.8A. Ideal for automotive applications due to AEC-Q100 screening level and compact design with small outline package style. Supports buck switcher config., PWM control technique, and has a max switching frequency of 550kHz.
TPS560430YFDBVR
TPS560430YFDBVR by Texas Instruments is a switching regulator with a max output current of 0.6A and max output voltage of 24V, ideal for automotive applications. It operates b/w -40 to 125°C, supports a wide input voltage range from 4-36V, and uses pulse width modulation control technique.
LM3478MMX/NOPB
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TNY268PN
Power Integrations
TNY268PN by Power Integrations is a switching regulator with max output current of 0.88A and max operating temp of 125°C. It features pulse width modulation control technique, single switcher config, and is ideal for automotive applications due to its temperature grade.
TNY280PN
TNY280PN by Power Integrations is a switching regulator with max output current of 0.802A and max operating temp of 125°C. Ideal for automotive applications, it operates at a frequency of 140kHz with control mode in current-mode for efficient power management.
TNY278PN
TNY278PN by Power Integrations is a switching regulator with 7 terminals, operating temperature range of -40 to 125°C, and max output current of 0.588A. Ideal for automotive applications, it utilizes pulse width modulation control technique and has a single switcher configuration with a max switching frequency of 140kHz.
TNY278GN-TL
TNY278GN-TL by Power Integrations is a switching regulator with current-mode control, operating b/w -40 to 125°C. It has a max output current of 0.6A and operates at a max switching frequency of 140kHz. Ideal for automotive applications due to its small outline package style and pulse width modulation control technique.
TNY288DG-TL
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TNY266PN
TNY266PN by Power Integrations is a switching regulator with max output current of 0.56A and max operating temp of 125°C. Ideal for automotive applications, it features a control mode of current-mode and operates at a max switching frequency of 140kHz.
TNY274GN-TL
TNY274GN-TL by Power Integrations is a switching regulator with 7 terminals, operating temperature range of -40 to 125°C, and max output current of 0.273A. Ideal for automotive applications, it features pulse width modulation control technique and single switcher configuration with a max switching frequency of 140kHz.
TNY290PG
TNY290PG by Power Integrations is a switching regulator with 7 terminals and a max output current of 0.802A. It operates b/w -40 to 125°C, making it suitable for various applications such as buck-boost switcher configurations in electronic devices requiring input voltages ranging from 85V to 265V.
TNY284DG-TL
TNY284DG-TL by Power Integrations is a switching regulator with 7 terminals, operating temperature range of -40 to 125°C, and max output current of 0.267A. It is ideal for automotive applications due to its small outline package style and buck-boost switcher configuration. With a wide input voltage range from 85V to 265V, it offers efficient power management in various electronic systems.
TNY277GN-TL
TNY277GN-TL by Power Integrations is a switching regulator with current-mode control, operating b/w -40 to 125°C. It has a max output current of 0.491A and operates at a max frequency of 140kHz. Ideal for automotive applications due to its small outline package and pulse width modulation control technique.
TNY280GN
TNY268GN-TL
TNY279PN
TNY279PN by Power Integrations is a switching regulator with 7 terminals, operating b/w -40 to 125°C. It features a max output current of 0.695A and operates at a frequency of up to 140kHz. Ideal for automotive applications due to its compact size and pulse width modulation control mode.
TNY264PN
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TNY279GN
TNY286DG-TL
TNY286DG-TL by Power Integrations is a switching regulator with a max output current of 0.374 A and a max switching frequency of 140 kHz. It is commonly used in applications requiring small outline package style and buck-boost switcher configuration.
TNY267PN
TNY267PN by Power Integrations is a switching regulator with max output current of 0.72A and max operating temp of 125°C. Ideal for automotive applications, it features a single switcher config and operates at a max frequency of 140kHz.
TNY274PN
TNY277PN
TNY265G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved