Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TNY264PN by Power Integrations is a switching regulator with max output current of 0.4A and max operating temp of 125°C. It features pulse width modulation control technique, single switcher config, and is ideal for automotive applications due to its temperature grade.
Median Price
$0.960
Lifecycle Status
Suppliers In-Stock
32
In-Stock Inventory
1k+
Farnell
1+ parts
$0.728
100+ parts
$0.633
1k+ parts
$0.558
10k+ parts
$0.547
Mouser Electronics
$0.768
$0.670
$0.653
DigiKey
$0.790
$0.588
Newark
$0.989
$0.814
$0.690
$0.673
Element14
$1.260
$1.100
$1.020
-
Elektronika Sales Private Limited
Future Electronics
$0.640
$0.615
RS (Exports)
$0.975
$0.948
Nova Conductors
$0.734
TME
$0.900
$0.780
$0.720
Chip Stock
Vyrian
ComSIT Distribution GmbH
NAC Semi
$1.380
$1.250
Schukat
$0.737
IBS Electronics
$0.919
$0.905
Holdelec - ElecDif-Pro
Manoshevitz Elec. Sales
Connector Distribution Corp
Micros sp.j. W. Kędra i J. Lic
$0.828
$0.783
Right Parts Inc.
A&K Electronics
Rotakorn
Bristol Electronics
Micros
$0.953
$0.896
SPM Sales
Partservice
$0.957
$0.719
Cogito LLC
Semtec, LLC
Goldney Electronics S.L.
Fibra_Brandt Electronic GMBH
LittleDiode
Argo Parts USA
Corohmni
$0.735
Continental Prestige Electronics
$0.886
$0.699
$0.593
Aztec Data Supply Inc.
$5.320
Advanced Electronics
$15.421
$14.033
$12.645
RC Electronics
Eastek
S.R.D Solutions
GreenTree Electronics
Infinite Electronics LLP (Excess)
Kepictronics
Lixinc
Authorized Procurement Solutions
Assy Fe
Netroflash
$0.698
$0.683
The plastic/epoxy material used for the package body provides durability and protection for the internal components, ensuring a longer lifespan for the product.
Having 7 terminals allows for multiple connections and flexibility in the application of the switching regulator.
With a high maximum operating temperature of 125°C, this switching regulator can perform reliably in harsh environmental conditions without overheating.
The current-mode control mode ensures stable and accurate regulation of the output current, leading to efficient and consistent performance.
The compact width of 7.62mm makes this switching regulator suitable for applications where space is limited, providing a more versatile and space-efficient solution.
Being automotive-grade means that this switching regulator meets specific quality and reliability standards required for automotive applications, ensuring performance under demanding conditions.
The high maximum switching frequency of 140 kHz allows for fast and efficient operation, reducing switching losses and improving overall efficiency of the regulator.
With a maximum output current of 0.4 A, this switching regulator can handle a decent amount of load, making it suitable for various power supply requirements.
Switching Regulators & Controllers TNY264PN attributes and parameters. Explore more Switching Regulators & Controllers devices from Power Integrations
Additional Features:
Other IC type:
Control Mode:
Control Technique:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
TNY264PN Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 16/Nov/2021
PCN Assembly/Origin - Mult Dev Site Add 30/Jul/2020
Power Integrations, Inc., is a leading innovator in semiconductor technologies for high-voltage power conversion. Our products are key building blocks in the clean-power ecosystem, enabling the generation of renewable energy as well as the efficient transmission and consumption of power in a vast range of applications including appliances, mobile devices, computers and countless industrial applications. Energy-saving technologies such as our PowiGaN™ gallium-nitride technology and our EcoSmart™ energy-efficiency technology prevent billions of kilowatt-hours of energy waste each year, while our highly integrated chips save billions of electronic components each year. Reflecting the environmental benefits of our products, Power Integrations' stock is a component of clean-technology stock indices sponsored by Cleantech Group LLC and Clean Edge, and our Green Room provides a comprehensive guide to energy-efficiency standards around the world.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
Laube Technology
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
New Jersey Semiconductor Products
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AP63200WU-7
Diodes Incorporated
SWITCHING REGULATOR; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30;
LM2575TV-5G
LM2575TV-5G by Onsemi is a BIPOLAR SWITCHING REGULATOR with 3.2A output current, 63 kHz switching frequency, and VOLTAGE-MODE control. Ideal for automotive applications due to its AUTOMOTIVE temperature grade, it operates b/w -40°C to 125°C efficiently regulating voltage from 4.75V to 40V down to a stable 3.3V output.
LMR54410DBVR
Texas Instruments
LMR54410DBVR by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125°C. It supports input voltages from 4-36V and outputs up to 1A at 28V. With a compact design and pulse frequency modulation control, it's ideal for applications requiring efficient power conversion in limited space.
LM5017MR/NOPB
LM5017MR/NOPB by Texas Instruments is a switching regulator with a max output current of 0.6A and a max output voltage of 90V. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications. With a compact package style and surface-mount design, it is ideal for space-constrained electronic devices.
LM25118MH/NOPB
LM25118MH/NOPB by Texas Instruments is a switching controller with a current-mode control technique. It operates in a wide temperature range from -40 to 125°C and supports a max output current of 10A at a max switching frequency of 500kHz. Ideal for automotive applications, this compact IC offers buck-boost configuration and can handle input voltages ranging from 3V to 42V.
LT8614IUDC#TRPBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 18; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
BD9G101G-TR
ROHM
ROHM's BD9G101G-TR is a switching regulator with max. output current of 0.5A, operating temp. range -40 to 105°C, and PWM control mode. Ideal for industrial applications requiring a compact design and high efficiency power conversion up to 42V input voltage and 5V output voltage.
MC34063AD
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM5008AMMX/NOPB
LM5008AMMX/NOPB by Texas Instruments is a switching regulator with a max output current of 0.35 A and a max input voltage of 95 V. It is commonly used in automotive applications due to its temperature grade and small package size.
LM2596S-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS54308DDCT
TPS54308DDCT by Texas Instruments is a switching regulator with 3A output current, 1V min output voltage, and 350kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design.
TPS560430YDBVR
TPS560430YDBVR by Texas Instruments is a switching regulator with 0.6A output current, 1V min output voltage, and 2100kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design.
LM25011MY/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 10; Package Code: HTSSOP; Package Shape: SQUARE; Surface Mount: YES;
LM22675MR-ADJ/NOPB
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Control Mode: VOLTAGE-MODE;
TPS54160ADRCR
TPS54160ADRCR by Texas Instruments is a switching regulator with 1.5A output current, 2500kHz max switching frequency, and 125°C max operating temp. Ideal for automotive applications, it operates b/w -40 to 125°C and supports input voltages from 3.5V to 60V.
TPS55340QRTERQ1
TPS55340QRTERQ1 by Texas Instruments is a 16-terminal switching regulator with 3-38V output voltage range. Ideal for automotive applications, it operates b/w -40 to 125°C, supports up to 7.75A output current, and uses pulse width modulation control technique at a max frequency of 2500 kHz.
LM2596S-12/NOPB
LM2596S-12/NOPB by Texas Instruments is a switching regulator with 5 terminals, operating b/w -40 to 125°C. It has a voltage output range of 3.3V to 37V and can handle up to 3A output current. Ideal for automotive applications due to its compact size and buck switcher configuration.
MPQ2918GL-AEC1-Z
Monolithic Power Systems
MPQ2918GL-AEC1-Z by Monolithic Power Systems is a 20-terminal switching controller with current-mode control, operating b/w -40 to 125 °C. It features a max output voltage of 25 V and supports pulse width modulation with a max switching frequency of 1000 kHz. Ideal for automotive applications due to AEC-Q100 screening level and small outline package style.
LTC3350EUHF#PBF
SWITCHED CAPACITOR CONVERTER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 38; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
LM5116MH/NOPB
LM5116MH/NOPB by Texas Instruments is a switching controller with 20 terminals, operating b/w -40 to 150°C. It supports a max output voltage of 80V and current up to 20A, making it ideal for automotive applications requiring high efficiency and precise current-mode control at frequencies up to 1MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TNY268PN
Power Integrations
TNY268PN by Power Integrations is a switching regulator with max output current of 0.88A and max operating temp of 125°C. It features pulse width modulation control technique, single switcher config, and is ideal for automotive applications due to its temperature grade.
TNY280PN
TNY280PN by Power Integrations is a switching regulator with max output current of 0.802A and max operating temp of 125°C. Ideal for automotive applications, it operates at a frequency of 140kHz with control mode in current-mode for efficient power management.
TNY280GN-TL
TNY280GN-TL by Power Integrations is a switching regulator with a max output current of 0.818A and a control mode of current-mode, suitable for automotive applications. It operates at temperatures ranging from -40 to 125°C, with a max switching frequency of 140kHz. This small outline package has 7 terminals and uses pulse width modulation for control.
TNY278PN
TNY278PN by Power Integrations is a switching regulator with 7 terminals, operating temperature range of -40 to 125°C, and max output current of 0.588A. Ideal for automotive applications, it utilizes pulse width modulation control technique and has a single switcher configuration with a max switching frequency of 140kHz.
TNY278GN-TL
TNY278GN-TL by Power Integrations is a switching regulator with current-mode control, operating b/w -40 to 125°C. It has a max output current of 0.6A and operates at a max switching frequency of 140kHz. Ideal for automotive applications due to its small outline package style and pulse width modulation control technique.
TNY288DG-TL
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TNY266PN
TNY266PN by Power Integrations is a switching regulator with max output current of 0.56A and max operating temp of 125°C. Ideal for automotive applications, it features a control mode of current-mode and operates at a max switching frequency of 140kHz.
TNY274GN-TL
TNY274GN-TL by Power Integrations is a switching regulator with 7 terminals, operating temperature range of -40 to 125°C, and max output current of 0.273A. Ideal for automotive applications, it features pulse width modulation control technique and single switcher configuration with a max switching frequency of 140kHz.
TNY290PG
TNY290PG by Power Integrations is a switching regulator with 7 terminals and a max output current of 0.802A. It operates b/w -40 to 125°C, making it suitable for various applications such as buck-boost switcher configurations in electronic devices requiring input voltages ranging from 85V to 265V.
TNY284DG-TL
TNY284DG-TL by Power Integrations is a switching regulator with 7 terminals, operating temperature range of -40 to 125°C, and max output current of 0.267A. It is ideal for automotive applications due to its small outline package style and buck-boost switcher configuration. With a wide input voltage range from 85V to 265V, it offers efficient power management in various electronic systems.
TNY277GN-TL
TNY277GN-TL by Power Integrations is a switching regulator with current-mode control, operating b/w -40 to 125°C. It has a max output current of 0.491A and operates at a max frequency of 140kHz. Ideal for automotive applications due to its small outline package and pulse width modulation control technique.
TNY280GN
TNY268GN-TL
TNY279PN
TNY279PN by Power Integrations is a switching regulator with 7 terminals, operating b/w -40 to 125°C. It features a max output current of 0.695A and operates at a frequency of up to 140kHz. Ideal for automotive applications due to its compact size and pulse width modulation control mode.
TNY279GN
TNY286DG-TL
TNY286DG-TL by Power Integrations is a switching regulator with a max output current of 0.374 A and a max switching frequency of 140 kHz. It is commonly used in applications requiring small outline package style and buck-boost switcher configuration.
TNY267PN
TNY267PN by Power Integrations is a switching regulator with max output current of 0.72A and max operating temp of 125°C. Ideal for automotive applications, it features a single switcher config and operates at a max frequency of 140kHz.
TNY274PN
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TNY277PN
TNY264P
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved