Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TERMINAL BLOCK ACCESSORY;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Dynamic Solutions
1+ parts
100+ parts
1k+ parts
10k+ parts
Shortec Electronics
ACDS - Activité Composants Distribution Service
Vyrian
Native Components
$20.244
Northwest PG Solutions
$22.268
$20.042
Assembly Products 1210239 attributes and parameters. Explore more Assembly Products devices from Phoenix Contact
Connector Accessory Type:
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
World Products
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
1-1469491-2
CONNECTOR ACCESSORY; Assembly Item Name: GUIDE PIN; Material: ZINC ALLOY; IEC Conformity: NO; Mounting Style: STRAIGHT; Wire Gauge (AWG): 0;
1607355
Phoenix Contact
CONNECTOR ACCESSORY;
5213
Keystone Electronics
DF11-22SCA
Hirose Electric
VN020160002(1)
Amphenol
Amphenol's VN020160002(1) features crimp terminal type, 600V AC/DC voltage rating, and 14A current. Ideal for applications requiring stamped contact design, with wire sizes ranging from 26-16 AWG. Suitable for use in environments with temperatures b/w -40 to 125°C.
1727040095
Molex
Molex 1727040095 BACKSHELL is an Assembly Product for FCT D-SUB usage. Made of ZINC ALLOY, it has a min cable entry of 0.118" and max temp of 100°C. Mounting options include SCREW (4-40 UNC).
3-2198618-7
TE Connectivity's 3-2198618-7 BACKSHELL is an assembly product with a shielding feature. It has shell sizes of 4 and can accommodate wires up to 0 AWG. Made of ABS material, it offers mounting options with screws (#4-40).
796075-1
CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Maximum Operating Temperature: 105 Cel; Contact Gender: MALE; Maximum Wire Size: 0 AWG;
33012-3002
The Molex 33012-3002 is a crimp terminal contact for MX150 connectors. It has a temperature range of -40 to 105°C, with wire sizes from 20 to 18 AWG. The female contact has a resistance of 8 mΩ and can handle up to 500V DC, making it ideal for various assembly applications.
DF11-2428SCF
3-770476-1
TE Connectivity's 3-770476-1 is a PHOSPHOR BRONZE CONTACT for SL-156 HOUSING. It has a rated voltage of 250V, rated current of 10A, and can accommodate wire sizes from 24 AWG to 18 AWG. Ideal for applications requiring FEMALE contacts in POWER designs with operating temperatures ranging from -55°C to 105°C.
DF13-2630SCFA(41)
1-583616-0
TE Connectivity 1-583616-0 CONTACT features CRIMP terminals for wire sizes 28-24 AWG, rated at 5A current. Suitable for POWER AND SIGNAL applications with operating temperatures from -40 to 85°C. Ideal for assemblies requiring FEMALE contacts with 0.24 mm2 cross-section area.
1-1469492-9
TE Connectivity 1-1469492-9 is an Assembly Product with max. operating temp. of 105°C and min. of -55°C. Featuring a max wire size of 0 AWG, it has a rated current of 1A and is made of zinc alloy. Ideal for applications requiring right angle mounting style like GUIDE ITEM assembly tasks.
175218-2
TE Connectivity's 175218-2 is a CRIMP terminal with GLASS FILLED POLYESTER insulator. With a rated current of 15A, it supports wire gauge from 20 to 16 AWG. Ideal for POWER AND SIGNAL applications, it features CSA and UL approvals.
66504-9
TE Connectivity 66504-9 is a CRIMP terminal with operating temperatures from -55 to 105 °C. It supports wire sizes ranging from 24 to 20 AWG and rated for 2A current. Ideal for SIGNAL applications requiring FEMALE contacts with 0.6 mm2 cross-section area.
M23053/5-106-9
Alpha Wire
ASSEMBLY ITEMS; IEC Conformity: NO; Construction: SINGLE WALL; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE;
8655MH1501BLF
AMPHENOL ICC
Amphenol Icc's 8655MH1501BLF is a UL-approved HOOD with zinc alloy material. It has a min cable entry of 0.157" and max operating temperature of 120°C. Ideal for applications requiring UNC 4.40 mounting option and jack screw assembly in temperatures ranging from -40°C to 120°C.
M80-0110005
Harwin Plc
The Harwin PLC M80-0110005 is a CRIMP terminal with max temp of 125°C and min temp of -55°C. It has a rated current of 3A, suitable for 22 AWG wire size. This FEMALE contact with ROUND PIN-SOCKET design is ideal for SIGNAL applications with 0.043" cable entry.
13697409
Aptiv
Aptiv 13697409 CONTACT is a MALE CRIMP terminal for FLRY-B cables. Made of COPPER ALLOY, it has 0.075-0.094 inch cable entry. Ideal for automotive wiring harness assembly due to its precise crimping and durable material.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
12103881
CONNECTOR ACCESSORY; Material: COPPER ALLOY; DIN Conformity: NO; Maximum Cable Entry: .079 inch; MIL Conformity: NO; Additional Features: CONTACT FINISH: TIN;
Delphi Connection Systems
CONNECTOR ACCESSORY; DIN Conformity: NO; Minimum Cable Entry: .073 inch; Maximum Cable Entry: .079 inch; Assembly Item Name: CONTACT; Additional Features: CONTACT FINISH: TIN;
1-2106123-1
CONNECTOR ACCESSORY; Rated Voltage: 300 V; Rated Current: 3.5 A; DIN Conformity: NO; Assembly Item Name: CONTACT; Wire Gauge (AWG): 0;
12103067
1-2103157-1
CONNECTOR ACCESSORY; Material: COPPER ALLOY; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
1-2106123-2
CONNECTOR ACCESSORY; Rated Voltage: 300 V; Rated Current: 3.5 A; Assembly Item Name: CONTACT; Contact Gender: FEMALE; DIN Conformity: NO;
1-2106123-3
CONNECTOR ACCESSORY; DIN Conformity: NO; Maximum Wire Size: 22 AWG; Mounting Style: STRAIGHT; MIL Conformity: NO; Material: COPPER ALLOY;
1210006
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: MOUNTING ITEM;
1210019
1210240
1210410000
Weidmueller & Kg
1210390000
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved