Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Panasonic ERTJ0ET222J is a NTC thermistor with 2200 ohm resistance, 5% tolerance, and 0.066 W power dissipation. It is used for temperature compensation in various applications due to its thermal sensitivity index of 4450 K and operating temperature range from -40 to 125 °C. The dual-ended SMT package with wraparound terminals makes it suitable for surface mount installations.
Median Price
$0.032
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.130
100+ parts
$0.083
1k+ parts
$0.070
10k+ parts
$0.063
Master Electronics
-
$0.024
Verical
Chip1Stop
$0.006
Arrow
$0.040
Nova Conductors
$0.029
Electro Sonic
$0.037
IBS Electronics
$0.035
Vyrian
Semicontronic
$0.005
Aranea Global
$0.027
Argo Parts USA
$0.028
Continental Prestige Electronics
Aztec Data Supply Inc.
$0.310
Perfect Parts
Corohmni
This thermistor has a rated temperature of 25 °C which makes it suitable for applications requiring precise temperature compensation.
The thermistor is specifically designed for temperature compensation applications, providing accurate and reliable performance.
With dual ended terminal placement, this thermistor offers versatile installation options and ease of connection.
The rectangular package shape allows for efficient use of space and easy integration into circuit designs.
The punched, 7 inch packaging method ensures convenient handling and storage of these thermistors.
With a resistance of 2200 ohm, this thermistor offers a specific level of resistance suitable for various applications.
Having two terminals provides a simple and clear connection method for the thermistor in electronic circuits.
The SMT package style offers a compact and low-profile design, ideal for surface mounting in modern electronic devices.
The wraparound terminal shape makes it easier to solder and secure the connections for reliable performance.
This thermistor can safely operate at temperatures up to 125 °C, expanding its range of applications.
With a high thermal sensitivity index of 4450 K, this thermistor can accurately respond to temperature changes.
The thermistor can operate at temperatures as low as -40 °C, making it suitable for a wide range of environmental conditions.
The tin terminal finish ensures good conductivity and long-term reliability of the connections.
The low height of the package allows for compact and space-efficient installation in tight electronic assemblies.
As a NTC thermistor, this product offers a negative temperature coefficient which is ideal for many temperature sensing applications.
With a tolerance of 5%, this thermistor provides accurate and consistent performance for temperature compensation tasks.
The 1 mm length of the package offers a compact form factor for easy integration into circuit designs.
The surface mounting type simplifies the installation process and saves valuable PCB space.
With a rated power dissipation of 0.066 W, this thermistor can reliably handle power loads in various applications.
The slim width of the package allows for efficient use of space on PCBs and in electronic devices.
Non-linear Resistors ERTJ0ET222J attributes and parameters. Explore more Non-linear Resistors devices from Panasonic
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermal Sensitivity Index:
Thermistor Application:
Tolerance:
ERTJ0ET222J Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Panasonic is a global leader in the design, manufacture, and sale of electronic products for consumer, business and industrial use. Established in 1918, Panasonic has grown to become one of the largest electronics companies in the world with more than 250,000 employees across over 500 consolidated subsidiaries. The company offers a wide range of products including household appliances such as flat-screen TVs and air conditioners, mobile phones, automotive components, office equipment such as copiers and printers, and medical devices.
CEO
Yuki Kusumi
Executive VP, CFO
Hirokazu Umeda
Chief Technology Officer (CTO)
Tatsuo Ogawa
Fabrication
Fab Initiation
Japan
Shiodome
Wafer Capacity
Shinagawa
Oshiage
Kadoma
Kashiwara
Kusatsu
HigashiOmi
Hikone
Kyoto-shi
Kobe
Kato
Yamatokoriyama
Tsu
Kasugai
Fukuroi
Oizumi
Tendo
Tsubame
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358N
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
National Semiconductor
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
NTCALUG01T103GA
Vishay Intertechnology's NTCALUG01T103GA is a 10000 ohm NTC thermistor with 2 terminals, radial placement, and chassis mount package. It has a thermal sensitivity index of 3984 K and operates b/w -40 to 150 °C. Ideal for temperature sensing applications, meeting AEC-Q200, CUL, and UL standards.
NTCS0805E3103FHT
Vishay Intertechnology's NTCS0805E3103FHT is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and thermal sensitivity index of 3940 K. It is used for temperature sensing applications in a surface mount package with dual-ended terminals. Operating temperature ranges from -40 to 150 °C.
RF1358-000
PTC RESETTABLE FUSE;
V18AUMLA1206NH
Harris Semiconductor
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2; Package Style (Meter): SMT;
V275LA20A
Intersil
Non-linear Resistors; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -55 Cel; Package Style (Meter): Radial; Maximum Energy Absorbing Capacity: 75 J;
EZJZ1V270GA
Panasonic
The Panasonic EZJZ1V270GA is a varistor resistor with 16V operating voltage and -40 to 85°C temperature range. It features dual-ended terminals in a rectangular SMT package, suitable for surface mount applications requiring protection against voltage surges.
B57235-S100-M
Siemens
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10 ohm; Maximum Operating Temperature: 170 Cel; No. of Terminals: 2; Thermistor Application: SOFT START;
MF-SM030-2-99
Bourns
Bourns MF-SM030-2-99 is a PTC resettable fuse with 60V URac, 1.7W P, and -40 to 85°C operating range. It offers overload protection in surface mount applications with dual-ended terminals in a rectangular package.
RXEF185-AP
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Terminal Shape: WIRE; Rated AC Voltage (URac): 72 V; Terminal Placement: RADIAL;
RXEF020
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 2.75 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: WIRE; Terminal Placement: RADIAL;
0805L100WR
0805L100WR by Littelfuse is a PTC resettable fuse with resistance of 0.06 ohm, operating voltage of 6V, and dual-ended terminals. It is used for overcurrent protection in various applications due to its compact rectangular SMT package measuring 2.2mm x 1.5mm x 1.8mm.
2016L050MR
2016L050MR by Littelfuse is a PTC resettable fuse with a resistance of 0.2 ohm and an operating voltage of 60V. It is used for overcurrent protection in various applications, featuring dual-ended terminal placement and a rectangular package shape.
MF-R030-2
Bourns MF-R030-2 is a PTC resettable fuse with resistance of 0.76 ohm, operating voltage of 60V, and max temp of 85°C. It is used in applications requiring radial terminal placement, such as overcurrent protection in electronic circuits.
SMD185F-2
TE Connectivity's SMD185F-2 is a PTC resettable fuse with 1.5W power dissipation, ideal for temperature sensing applications. Featuring dual-ended terminals and a rectangular package, it operates b/w -40°C to 85°C. This non-linear resistor is surface mountable and comes in TR packaging method.
RF1347-000
0ZCJ0016FF2E
Bel Fuse
Bel Fuse's 0ZCJ0016FF2E is a PTC resettable fuse with a resistance of 1.1 ohm and operating voltage of 48V. It is used in non-linear resistor applications, featuring dual-ended terminal placement and surface mount mounting type.
B57364-S109-M
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1 ohm; Shape (Package): DISK PACKAGE; Terminal Shape: WIRE; No. of Terminals: 2;
RXEF110K
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Additional Features: 0.15-0.25 OHMS AT 20 DEG CEL; Terminal Placement: RADIAL; Minimum Operating Temperature: -40 Cel;
RF2487-000
TE Connectivity's RF2487-000 is a PTC resettable fuse with 0.11 ohm resistance, suitable for overcurrent protection applications. Featuring dual-ended terminals and SMT package style, it operates at -40 to 85°C with a max voltage of 33V. Compliant with CSA, TUV, and UL standards, this surface-mount device measures 4.83mm x 3.41mm x 1.46mm.
NTHS1206N01N1003JE
Vishay Dale
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .28 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ERTJ1VG103FA
Panasonic ERTJ1VG103FA is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in various applications due to its dual-ended terminal placement and SMT package style. With a thermal sensitivity index of 3435 K, it operates b/w -40 to 125 °C.
ERTJ1VG103JA
Panasonic ERTJ1VG103JA is a 10000 ohm NTC thermistor with 5% tolerance. It has a thermal sensitivity index of 3435 K and operates b/w -40 to 125 °C. Ideal for temperature compensation applications due to its dual-ended terminal placement in a rectangular SMT package.
ERTJ0EG103FA
Panasonic ERTJ0EG103FA is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 125°C max operating temp. Ideal for temperature compensation in SMT applications due to its dual-ended terminals and compact rectangular package design.
ERTJ0ES104F
Panasonic ERTJ0ES104F is a NTC thermistor with 100000 ohm resistance, 1% tolerance, and 125°C max operating temp. Ideal for temperature compensation in various applications due to its SMT package style and thermal sensitivity index of 4390 K. Dual-ended terminals make it suitable for surface mounting methods.
ERTJ1VS104FA
Panasonic ERTJ1VS104FA is a NTC thermistor with 100000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in applications requiring thermal sensitivity index of 4390 K. The dual-ended rectangular package with SMT style and wraparound terminals makes it suitable for surface mounting method.
ERTJ0EG103JA
Panasonic ERTJ0EG103JA is a NTC thermistor with 10000 ohm resistance, 5% tolerance, and 125°C max operating temp. Ideal for temperature compensation applications due to its thermal sensitivity index of 3435 K and SMT package style for surface mounting.
ERTJ1VR103J
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
ERTJ1VR682J
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 6800 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
ERTJ1VV104J
Panasonic ERTJ1VV104J is a NTC thermistor with 100000 ohm resistance, 5% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in applications requiring dual-ended terminals and surface mounting type.
ERTJ0ER333J
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 33000 ohm; Rated Power Dissipation (P): .066 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
ERTJ0EP473F
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Rated Power Dissipation (P): .066 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
ERTJ0EV104F
ERTJ0EV104F by Panasonic is a non-linear resistor with a resistance of 100000 ohm and a tolerance of 1%. It is used for temperature compensation, with a rated temperature range of -40 to 125 °C.
ERTJ1VT472J
Panasonic ERTJ1VT472J is a 4700 ohm NTC thermistor with 5% tolerance. It has a thermal sensitivity index of 4450 K and operates b/w -40 to 125 °C. Ideal for temperature compensation applications, this SMT resistor features dual-ended terminals in a rectangular package.
ERTJ0EV474J
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 470000 ohm; Rated Power Dissipation (P): .066 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
ERTJ1VS104JA
Panasonic ERTJ1VS104JA is a NTC thermistor with 100000 ohm resistance, 5% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in applications requiring thermal sensitivity index of 4390 K and operating temperatures ranging from -40 to 125 °C.
ERTJ1VV154J
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 150000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
ERTJ1VG103FM
Panasonic's ERTJ1VG103FM is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for temperature sensing applications due to its thermal sensitivity index of 3435 K and operating range from -40 to 150 °C. This surface mount device features dual-ended terminals in a rectangular package for easy installation.
ERTJ0EA220J
Panasonic ERTJ0EA220J is a 22 ohm NTC thermistor with 5% tolerance. It has a thermal sensitivity index of 2700 K and operates b/w -40 to 125 °C. Ideal for temperature compensation applications, this surface mount resistor comes in a rectangular package with dual-ended terminals.
ERTJ0EP473J
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Rated Power Dissipation (P): .066 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
ERTJ0ET222H
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 2200 ohm; Rated Power Dissipation (P): .066 W; Maximum Operating Temperature: 125 Cel; Tolerance: 3 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved