Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Panasonic ERTJ1VR682J is a NTC thermistor with 6800 ohm resistance, 5% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in applications requiring thermal sensitivity index of 4300 K. With dual-ended terminals and SMT package style, it operates b/w -40 to 125 °C for precise measurements.
Median Price
$0.057
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.120
100+ parts
$0.087
1k+ parts
$0.063
10k+ parts
$0.059
DigiKey
$0.130
$0.073
-
Master Electronics
$0.048
Future Electronics
Verical
$0.040
Chip1Stop
$0.053
Arrow
Nova Conductors
$0.058
NAC Semi
$0.094
SPM Sales
Vyrian
Schukat
$0.108
Electro Sonic
$0.051
IBS Electronics
TME
$0.050
Bristol Electronics
Atlantic Semiconductor
Prism Electronics
Semicontronic
$0.032
$0.031
Continental Prestige Electronics
Argo Parts USA
$0.056
Netroflash
Aztec Data Supply Inc.
$0.480
Perfect Parts
Corohmni
Stable performance at standard operating temperatures.
Useful for maintaining stable performance over a range of temperatures.
Allows for easier connection and integration into circuits.
Compact design for space-saving and efficient placement.
Suitable resistance for specific applications requiring this value.
Simplified connectivity with only two terminals.
Suitable for surface mount applications for ease of installation.
Facilitates secure and stable connection during installation.
Can withstand higher temperatures for extended operating conditions.
High sensitivity to temperature changes for precise control.
Can operate in lower temperature environments without issues.
Provides corrosion resistance and better conductivity for terminals.
Low profile design for space-constrained applications.
Offering nonlinear temperature-resistance characteristics for specific applications.
Reliable performance within a small margin of error.
Compact size for efficient placement and installation.
Easy and secure mounting on circuit boards for seamless integration.
Appropriate power rating for specific applications without risk of overheating.
Compact width for space-saving and efficient utilization of circuit board space.
Non-linear Resistors ERTJ1VR682J attributes and parameters. Explore more Non-linear Resistors devices from Panasonic
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermal Sensitivity Index:
Thermistor Application:
Tolerance:
ERTJ1VR682J Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Panasonic is a global leader in the design, manufacture, and sale of electronic products for consumer, business and industrial use. Established in 1918, Panasonic has grown to become one of the largest electronics companies in the world with more than 250,000 employees across over 500 consolidated subsidiaries. The company offers a wide range of products including household appliances such as flat-screen TVs and air conditioners, mobile phones, automotive components, office equipment such as copiers and printers, and medical devices.
CEO
Yuki Kusumi
Executive VP, CFO
Hirokazu Umeda
Chief Technology Officer (CTO)
Tatsuo Ogawa
Fabrication
Fab Initiation
Japan
Shiodome
Wafer Capacity
Shinagawa
Oshiage
Kadoma
Kashiwara
Kusatsu
HigashiOmi
Hikone
Kyoto-shi
Kobe
Kato
Yamatokoriyama
Tsu
Kasugai
Fukuroi
Oizumi
Tendo
Tsubame
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
BSS138DW-7-F
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
First Components International
Daco Semiconductor
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
Promax-johnton
TO103J2F
Littelfuse
TO103J2F by Littelfuse is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and thermal sensitivity index of 3892 K. It is used for temperature sensing applications with a rated temperature range from -55°C to 150°C. The thermistor has radial terminal placement and through-hole mounting type.
PS103J2
PS103J2 by Littelfuse is a NTC thermistor with 10000 ohm resistance, ideal for temperature sensing applications. Featuring radial terminal placement and disk package shape, it operates b/w -80 to 150 °C with high thermal sensitivity index of 3892 K. Suitable for through hole mounting, this component has tin terminal finish and wire-shaped terminals.
V3.5MLA0805LNH
V3.5MLA0805LNH by Littelfuse is a VARISTOR with 3.5 V operating voltage and 0.1 J energy absorption capacity. It has DUAL ENDED terminals, RECTANGULAR PACKAGE shape, and is used in applications requiring surge protection against voltage spikes in electronic circuits.
TD5A
Honeywell Sensing And Control
TD5A by Honeywell Sensing And Control is a PTC thermistor with 3 terminals, radial placement, and rectangular package. It operates b/w -40°C to 150°C, primarily used for temperature sensing applications with through-hole mounting.
1812L150/24MR
1812L150/24MR by Littelfuse is a PTC resettable fuse with resistance of 0.04 ohm. It features dual-ended terminals in a rectangular SMT package. Primarily used for overcurrent protection, it has a temperature range from -40 to 85 °C and meets CUL, TUV, and UL standards.
V10E150PL1T
V10E150PL1T by Littelfuse is a VARISTOR with 150V RMS and 200V DC max circuit voltage. It has METAL OXIDE FILM tech, 30J energy absorption, and -55 to 85°C operating temp range. Ideal for surge protection in various applications due to its high energy capacity and radial terminal placement.
MINISMDC075F-2
TE Connectivity's MINISMDC075F-2 is a PTC resettable fuse with resistance of 0.11 ohm. It features dual-ended terminals and a rectangular package for surface mount applications. Ideal for temperature sensing, it has a max operating temperature of 85°C.
MF-MSMF050/40X-2
Bourns
Bourns MF-MSMF050/40X-2 is a PTC resettable fuse with 0.15 ohm resistance, 40V operating voltage, and dual-ended terminals. Ideal for overcurrent protection in various applications. SMT package style, gold over nickel terminal finish, UL and CUL reference standards.
ERTJ1VT472J
Panasonic ERTJ1VT472J is a 4700 ohm NTC thermistor with 5% tolerance. It has a thermal sensitivity index of 4450 K and operates b/w -40 to 125 °C. Ideal for temperature compensation applications, this SMT resistor features dual-ended terminals in a rectangular package.
V5.5MLA0603H23
VARISTOR;
RF2623-000
TE Connectivity's RF2623-000 is a PTC resettable fuse with resistance of 0.38 ohm and rated power dissipation of 1.5W. It is used for temperature sensing applications, featuring radial terminal placement and disk package shape for through hole mounting.
55015
Measurement Specialties
NTC THERMISTOR; No. of Terminals: 2;
1206L016WR
1206L016WR by Littelfuse is a PTC resettable fuse with resistance of 1.2 ohm and operating voltage of 30V, ideal for overcurrent protection applications. Featuring dual-ended terminals and surface mounting type, it has a compact package style (SMT) with dimensions of 3.4mm x 1.8mm x 1.45mm (LxWxH). Compliant with CUL, TUV, and UL standards, it operates b/w -40°C to 85°C temperature range.
RXEF075
TE Connectivity's RXEF075 is a PTC resettable fuse with resistance of 0.6 ohm and rated power dissipation of 0.92 W. It is used for temperature sensing applications, featuring radial terminal placement and disk package shape. Operating temperature ranges from -40 to 85 °C.
SG200
Rti Electronics
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5 ohm; Maximum Operating Temperature: 65 Cel; Shape (Package): DISK PACKAGE; Minimum Operating Temperature: -40 Cel;
NTCS0603E3103GMT
Vishay Intertechnology
Vishay Intertechnology's NTCS0603E3103GMT is a NTC thermistor with 10000 ohm resistance, 2% tolerance, and 150°C max operating temp. Ideal for temperature sensing applications due to its thermal sensitivity index of 3610 K and surface mount package style.
B72207-S271-K101
TDK
TDK's B72207-S271-K101 varistor has a max energy capacity of 21J, operating voltage of 350V, and rated AC voltage of 275V. Ideal for surge protection in applications requiring high energy absorption such as power supplies and industrial equipment.
1812L125/16DR
1812L125/16DR by Littelfuse is a PTC resettable fuse with resistance of 0.05 ohm, dual-ended terminals, and rectangular SMT package. It is used for overcurrent protection in various applications. Operating temperature ranges from -40 to 85 °C with max DC voltage of 16 V.
V42MLA1206H
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Rated Temperature: 150 Cel; Maximum Circuit DC Voltage: 42 V;
B72220P3301K101
The TDK B72220P3301K101 is a VARISTOR with 305J energy capacity, 385V operating voltage, and 1W power dissipation. It is used for surge protection in circuits with up to 300V RMS voltage. Ideal for applications requiring high transient voltage suppression in radial through-hole mounting setups.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ERTJ1VG103FA
Panasonic ERTJ1VG103FA is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in various applications due to its dual-ended terminal placement and SMT package style. With a thermal sensitivity index of 3435 K, it operates b/w -40 to 125 °C.
ERTJ1VG103JA
Panasonic ERTJ1VG103JA is a 10000 ohm NTC thermistor with 5% tolerance. It has a thermal sensitivity index of 3435 K and operates b/w -40 to 125 °C. Ideal for temperature compensation applications due to its dual-ended terminal placement in a rectangular SMT package.
ERTJ0EG103FA
Panasonic ERTJ0EG103FA is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 125°C max operating temp. Ideal for temperature compensation in SMT applications due to its dual-ended terminals and compact rectangular package design.
ERTJ0ES104F
Panasonic ERTJ0ES104F is a NTC thermistor with 100000 ohm resistance, 1% tolerance, and 125°C max operating temp. Ideal for temperature compensation in various applications due to its SMT package style and thermal sensitivity index of 4390 K. Dual-ended terminals make it suitable for surface mounting methods.
ERTJ1VS104FA
Panasonic ERTJ1VS104FA is a NTC thermistor with 100000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in applications requiring thermal sensitivity index of 4390 K. The dual-ended rectangular package with SMT style and wraparound terminals makes it suitable for surface mounting method.
ERTJ0EG103JA
Panasonic ERTJ0EG103JA is a NTC thermistor with 10000 ohm resistance, 5% tolerance, and 125°C max operating temp. Ideal for temperature compensation applications due to its thermal sensitivity index of 3435 K and SMT package style for surface mounting.
ERTJ1VR103J
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
ERTJ1VV104J
Panasonic ERTJ1VV104J is a NTC thermistor with 100000 ohm resistance, 5% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in applications requiring dual-ended terminals and surface mounting type.
ERTJ0ER333J
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 33000 ohm; Rated Power Dissipation (P): .066 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
ERTJ0EP473F
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Rated Power Dissipation (P): .066 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
ERTJ0EV104F
ERTJ0EV104F by Panasonic is a non-linear resistor with a resistance of 100000 ohm and a tolerance of 1%. It is used for temperature compensation, with a rated temperature range of -40 to 125 °C.
ERTJ0EV474J
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 470000 ohm; Rated Power Dissipation (P): .066 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
ERTJ1VS104JA
Panasonic ERTJ1VS104JA is a NTC thermistor with 100000 ohm resistance, 5% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in applications requiring thermal sensitivity index of 4390 K and operating temperatures ranging from -40 to 125 °C.
ERTJ1VV154J
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 150000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
ERTJ0ET222J
Panasonic ERTJ0ET222J is a NTC thermistor with 2200 ohm resistance, 5% tolerance, and 0.066 W power dissipation. It is used for temperature compensation in various applications due to its thermal sensitivity index of 4450 K and operating temperature range from -40 to 125 °C. The dual-ended SMT package with wraparound terminals makes it suitable for surface mount installations.
ERTJ1VG103FM
Panasonic's ERTJ1VG103FM is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for temperature sensing applications due to its thermal sensitivity index of 3435 K and operating range from -40 to 150 °C. This surface mount device features dual-ended terminals in a rectangular package for easy installation.
ERTJ0EA220J
Panasonic ERTJ0EA220J is a 22 ohm NTC thermistor with 5% tolerance. It has a thermal sensitivity index of 2700 K and operates b/w -40 to 125 °C. Ideal for temperature compensation applications, this surface mount resistor comes in a rectangular package with dual-ended terminals.
ERTJ0EP473J
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Rated Power Dissipation (P): .066 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
ERTJ1VR683H
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 68000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 3 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved