Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Panasonic ERTJ0EP473F is a NTC thermistor with 47000 ohm resistance, 1% tolerance, and 0.066 W power dissipation. It is used for temperature compensation in applications requiring thermal sensitivity index of 4100 K. With dual-ended terminals and SMT package style, it operates b/w -40 to 125 °C for precise measurements.
Median Price
$0.056
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.100
100+ parts
$0.076
1k+ parts
$0.064
10k+ parts
$0.052
DigiKey
$0.120
$0.057
Chip1Stop
-
$0.006
$0.004
Arrow
$0.054
$0.045
Verical
Nova Conductors
Electro Sonic
$0.038
NAC Semi
$0.048
Vyrian
Semicontronic
$0.003
Argo Parts USA
$0.050
$0.049
Continental Prestige Electronics
Aztec Data Supply Inc.
$0.200
Andel Nordic
$0.530
$0.368
Authorized Procurement Solutions
A-Z Elektronik GmbH
Corohmni
Netroflash
$0.051
Having a rated temperature of 25 °C makes this thermistor suitable for a wide range of applications where temperature compensation is needed.
The use of this thermistor for temperature compensation ensures accurate readings and stable performance in various electronic devices.
Dual ended terminal placement allows for easy and secure connection, enhancing the reliability of the product.
With a resistance of 47000 ohm, this thermistor provides precise and consistent resistance values for temperature sensing applications.
The high maximum operating temperature of 125 °C means that this thermistor can withstand elevated temperatures without compromising its performance.
The surface mount package style makes installation of this thermistor easy and efficient, saving time and effort during production.
The high thermal sensitivity index of 4100 K ensures accurate temperature sensing and responsiveness in various environmental conditions.
With a minimum operating temperature of -40 °C, this thermistor can function effectively in cold environments without issues.
The tight tolerance of 1% ensures that this thermistor provides accurate and consistent temperature readings, making it a reliable choice for temperature compensation applications.
Non-linear Resistors ERTJ0EP473F attributes and parameters. Explore more Non-linear Resistors devices from Panasonic
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermal Sensitivity Index:
Thermistor Application:
Tolerance:
ERTJ0EP473F Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Panasonic is a global leader in the design, manufacture, and sale of electronic products for consumer, business and industrial use. Established in 1918, Panasonic has grown to become one of the largest electronics companies in the world with more than 250,000 employees across over 500 consolidated subsidiaries. The company offers a wide range of products including household appliances such as flat-screen TVs and air conditioners, mobile phones, automotive components, office equipment such as copiers and printers, and medical devices.
CEO
Yuki Kusumi
Executive VP, CFO
Hirokazu Umeda
Chief Technology Officer (CTO)
Tatsuo Ogawa
Fabrication
Fab Initiation
Japan
Shiodome
Wafer Capacity
Shinagawa
Oshiage
Kadoma
Kashiwara
Kusatsu
HigashiOmi
Hikone
Kyoto-shi
Kobe
Kato
Yamatokoriyama
Tsu
Kasugai
Fukuroi
Oizumi
Tendo
Tsubame
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
General Transistor
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Semiconductors
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
B72220-S461-K101
TDK
The TDK B72220-S461-K101 is a VARISTOR with 460V max circuit RMS voltage and 195J max energy absorption. It has a radial terminal placement, wire terminals, and operates b/w -40°C to 85°C. Ideal for surge protection in various electronic applications.
RXEF050
TE Connectivity
TE Connectivity's RXEF050 is a PTC resettable fuse with 1.17 ohm resistance and rated power dissipation of 0.77 W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and radial terminal placement for easy installation in through-hole mounts.
250R120U
Littelfuse
250R120U by Littelfuse is a PTC resettable fuse with resistance of 4 ohm and rated AC voltage of 250 V. It is used for overcurrent protection in applications requiring radial terminal placement and rectangular package shape. Operating voltage is 60 V, with max temperature of 85 °C and min of -40 °C.
RF2487-000
TE Connectivity's RF2487-000 is a PTC resettable fuse with 0.11 ohm resistance, suitable for overcurrent protection applications. Featuring dual-ended terminals and SMT package style, it operates at -40 to 85°C with a max voltage of 33V. Compliant with CSA, TUV, and UL standards, this surface-mount device measures 4.83mm x 3.41mm x 1.46mm.
MF-MSMF020-2
Bourns
The Bourns MF-MSMF020-2 is a PTC resettable fuse with a resistance of 0.4 ohm and an operating voltage of 30V. It is commonly used for overcurrent protection in various applications, featuring dual-ended terminal placement and surface mount mounting type.
2920L700/12MR
2920L700/12MR by Littelfuse is a PTC resettable fuse with resistance of 0.003 ohm and operating voltage of 12V. It is used for overcurrent protection, featuring dual-ended terminals and surface mounting type. This non-linear resistor has a max operating temperature of 85°C and min of -40°C, conforming to CUL, TUV, and UL standards.
RXEF005-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Terminal Shape: WIRE; Shape (Package): DISK PACKAGE; Rated AC Voltage (URac): 60 V;
RXEF090-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Terminal Placement: RADIAL; JESD-609 Code: e3; No. of Terminals: 2;
NTCS0805E3222JMT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 2200 ohm; Rated Power Dissipation (P): .21 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
RF1347-000
PTC RESETTABLE FUSE;
V05E25P
V05E25P by Littelfuse is a VARISTOR with 2.5J energy capacity, 25V RMS voltage, and 31V operating voltage. Ideal for surge protection in electronics, it has radial terminal placement and metal oxide film technology. With -40 to 85°C temp range, it's UL/TUV/CUL certified for reliability.
V5.5MLA0805NH
Harris Semiconductor
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Terminal Placement: DUAL ENDED; Length (Package): 3.05 mm; JESD-609 Code: e3;
V82ZA20P
V82ZA20P by Littelfuse is a VARISTOR with 50V max circuit RMS voltage and 25J energy absorption. Operating at -55 to 125°C, it's ideal for surge protection in various applications like power supplies and industrial equipment. With a radial package style, it offers reliable protection against voltage spikes.
RXEF010
TE Connectivity's RXEF010 is a PTC resettable fuse with 4.5 ohm resistance, suitable for temperature sensing applications. Featuring radial terminal placement and disk package shape, it operates b/w -40 to 85°C with a max voltage of 60V. Ideal for through-hole mounting in various electronic circuits.
CG0603MLC-05LE
Bourns CG0603MLC-05LE is a varistor with 25V max RMS voltage and 5V operating voltage. It has dual-ended terminals, rectangular package, and operates b/w -40°C to 85°C. Ideal for surface mount applications in automotive electronics meeting AEC-Q200 standards.
NTCS0805E3472JMT
Vishay Intertechnology
Vishay Intertechnology's NTCS0805E3472JMT is a 4700 ohm NTC thermistor with 5% tolerance. It operates b/w -40°C to 150°C, making it ideal for temperature sensing applications. With a thermal sensitivity index of 3500 K, this SMT package thermistor is suitable for automotive and industrial use.
V5.5MLA0603H
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 125 Cel; Rated Temperature: 150 Cel; JESD-609 Code: e3;
60R300XF
60R300XF by Littelfuse is a PTC resettable fuse with resistance of 0.04 ohm and operating voltage of 60V. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. With reference standards including CUL, TUV, and UL, it operates b/w -40 to 85 °C.
V39ZA1P
V39ZA1P by Littelfuse is a varistor with 25V max circuit RMS voltage and 31V operating voltage. It has a rated power dissipation of 0.25W, making it suitable for surge protection applications in electronics. With a max energy absorbing capacity of 1.2J, it can handle transient overvoltage events efficiently.
MINISMDC030F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .2 ohm; Maximum Operating Temperature: 85 Cel; Height (Package): .89 mm; Operating Voltage: 30 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ERTJ1VG103FA
Panasonic
Panasonic ERTJ1VG103FA is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in various applications due to its dual-ended terminal placement and SMT package style. With a thermal sensitivity index of 3435 K, it operates b/w -40 to 125 °C.
ERTJ1VG103JA
Panasonic ERTJ1VG103JA is a 10000 ohm NTC thermistor with 5% tolerance. It has a thermal sensitivity index of 3435 K and operates b/w -40 to 125 °C. Ideal for temperature compensation applications due to its dual-ended terminal placement in a rectangular SMT package.
ERTJ0EG103FA
Panasonic ERTJ0EG103FA is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 125°C max operating temp. Ideal for temperature compensation in SMT applications due to its dual-ended terminals and compact rectangular package design.
ERTJ0ES104F
Panasonic ERTJ0ES104F is a NTC thermistor with 100000 ohm resistance, 1% tolerance, and 125°C max operating temp. Ideal for temperature compensation in various applications due to its SMT package style and thermal sensitivity index of 4390 K. Dual-ended terminals make it suitable for surface mounting methods.
ERTJ1VS104FA
Panasonic ERTJ1VS104FA is a NTC thermistor with 100000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in applications requiring thermal sensitivity index of 4390 K. The dual-ended rectangular package with SMT style and wraparound terminals makes it suitable for surface mounting method.
ERTJ0EG103JA
Panasonic ERTJ0EG103JA is a NTC thermistor with 10000 ohm resistance, 5% tolerance, and 125°C max operating temp. Ideal for temperature compensation applications due to its thermal sensitivity index of 3435 K and SMT package style for surface mounting.
ERTJ1VR103J
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
ERTJ1VR682J
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 6800 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
ERTJ1VV104J
Panasonic ERTJ1VV104J is a NTC thermistor with 100000 ohm resistance, 5% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in applications requiring dual-ended terminals and surface mounting type.
ERTJ0ER333J
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 33000 ohm; Rated Power Dissipation (P): .066 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
ERTJ0EV104F
ERTJ0EV104F by Panasonic is a non-linear resistor with a resistance of 100000 ohm and a tolerance of 1%. It is used for temperature compensation, with a rated temperature range of -40 to 125 °C.
ERTJ1VT472J
Panasonic ERTJ1VT472J is a 4700 ohm NTC thermistor with 5% tolerance. It has a thermal sensitivity index of 4450 K and operates b/w -40 to 125 °C. Ideal for temperature compensation applications, this SMT resistor features dual-ended terminals in a rectangular package.
ERTJ0EV474J
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 470000 ohm; Rated Power Dissipation (P): .066 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
ERTJ1VS104JA
Panasonic ERTJ1VS104JA is a NTC thermistor with 100000 ohm resistance, 5% tolerance, and 0.1 W power dissipation. It is used for temperature compensation in applications requiring thermal sensitivity index of 4390 K and operating temperatures ranging from -40 to 125 °C.
ERTJ1VV154J
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 150000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
ERTJ0ET222J
Panasonic ERTJ0ET222J is a NTC thermistor with 2200 ohm resistance, 5% tolerance, and 0.066 W power dissipation. It is used for temperature compensation in various applications due to its thermal sensitivity index of 4450 K and operating temperature range from -40 to 125 °C. The dual-ended SMT package with wraparound terminals makes it suitable for surface mount installations.
ERTJ1VG103FM
Panasonic's ERTJ1VG103FM is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for temperature sensing applications due to its thermal sensitivity index of 3435 K and operating range from -40 to 150 °C. This surface mount device features dual-ended terminals in a rectangular package for easy installation.
ERTJ0EA220J
Panasonic ERTJ0EA220J is a 22 ohm NTC thermistor with 5% tolerance. It has a thermal sensitivity index of 2700 K and operates b/w -40 to 125 °C. Ideal for temperature compensation applications, this surface mount resistor comes in a rectangular package with dual-ended terminals.
ERTJ0EP473J
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Rated Power Dissipation (P): .066 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
ERTJ0EP473G
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Rated Power Dissipation (P): .066 W; Maximum Operating Temperature: 125 Cel; Tolerance: 2 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved