Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Bourns MF-SMDF050-2 is a PTC resettable fuse with resistance of 0.2 ohm and operating voltage of 60V. It features dual-ended terminals, SMT package style, and gold over nickel terminal finish. Ideal for applications requiring protection against overcurrent events in electronic circuits.
Median Price
$0.267
Lifecycle Status
Suppliers In-Stock
40
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.180
100+ parts
-
1k+ parts
10k+ parts
Distrelec
$0.424
$0.402
$0.348
Mouser Electronics
$0.430
$0.291
$0.221
$0.185
RS Americas
$0.432
$0.345
DigiKey
$0.510
$0.299
$0.229
Element14
$0.676
TTI
$0.202
Arrow
$0.198
Verical
$0.259
Avnet
$0.174
Farnell
$0.306
$0.239
$0.222
Master Electronics
$0.188
Newark
$0.640
Future Electronics
$0.103
Chip1Stop
$0.226
Ozdisan Elektronik
Greenchips
$0.183
$0.166
$0.149
Freelance Electronics
$0.230
$0.242
$0.228
TME
$0.290
Nova Conductors
$0.315
Maritex
$0.355
$0.243
$0.233
Bristol Electronics
$0.450
$0.167
$0.117
Chip Stock
SIE Connect GmbH - GreenChips
Extreme Components
Electro Sonic
$0.177
$0.171
Vyrian
LIBRA Elektronik GmbH
Holdelec - ElecDif-Pro
Contempo Components LLC
Sensible Micro Corp
IBS Electronics
$0.533
$0.505
Cyclops Electronics Ltd
ComSIT Distribution GmbH
NAC Semi
A2Z Electronics, Inc.
ACDS - Activité Composants Distribution Service
Prism Electronics
Electronic Expediters
Resion
Decca Corp
$0.143
$0.140
$0.139
Advanced Electronics
$0.147
Corohmni
$0.206
Argo Parts USA
$0.223
Aztec Data Supply Inc.
$0.250
Semicontronic
$0.311
$0.303
$0.302
Perfect Parts
Eastek
$0.200
GreenTree Electronics
Continental Prestige Electronics
$0.301
$0.263
Cyclops Electronics Ltd (Excess)
Formix International (Excess)
Kepictronics
Authorized Procurement Solutions
Futuretech Components
Robosynatics
Lucentia Tech
$0.095
Bastille Electronics
Allen Electronics Distributors
Dual ended terminal placement allows for easy and flexible installation in various circuit configurations, providing convenience and versatility.
Rectangular package shape enables efficient use of space on circuit boards, making it ideal for applications with limited board real estate.
TR packing method ensures reliable transportation and storage of the product, reducing the risk of damage during shipping.
Low resistance value of 0.2 ohm allows for effective current limiting and protection in circuits, enhancing overall safety and performance.
Surface mount technology (SMT) package style enables easy and secure mounting on PCBs, facilitating automated assembly processes for increased efficiency.
Wraparound terminal shape provides robust mechanical connection and enhanced stability during operation, reducing the risk of disconnection or damage.
High maximum operating temperature of 85°C ensures reliable performance in a wide range of environmental conditions, making it suitable for various applications.
Low minimum operating temperature of -40°C enables operation in cold environments, offering versatility and durability in harsh conditions.
Gold over nickel terminal finish provides excellent corrosion resistance and conductivity, ensuring long-term reliability and stable performance.
Low package height of 1.09 mm allows for compact and space-efficient design, particularly beneficial for slim and lightweight electronic devices.
PTC resettable fuse resistor type offers overcurrent protection with automatic reset functionality, increasing system uptime and reducing maintenance costs.
Optimal operating voltage of 60 V ensures compatibility with a wide range of electronic devices and power supplies, enhancing flexibility in circuit design.
Moderate package length of 5.44 mm balances space efficiency with ease of handling during installation and maintenance, providing a practical form factor.
Surface mounting type offers quick and secure installation on PCBs, minimizing assembly time and simplifying production processes.
Compliance with recognized standards such as CUL, TUV, and UL ensures quality, safety, and reliability of the product, meeting industry requirements.
Compact package width of 4.93 mm allows for efficient use of space on PCBs while accommodating multiple components, optimizing overall circuit design.
Non-linear Resistors MF-SMDF050-2 attributes and parameters. Explore more Non-linear Resistors devices from Bourns
Additional Features:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Operating Voltage:
MF-SMDF050-2 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
PCN Design/Specification - MF Cert Mark Aug/2015
PCN Assembly/Origin - MF-yyyF, MF-xSMF Series May/2014
PCN Packaging - MF-MSMF,SMDF Series TR Dec/2009
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
World Products
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Semitronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
LL4148
Semtech Electronics
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
V5.5MLA0805NH
Littelfuse
V5.5MLA0805NH by Littelfuse is a VARISTOR with 5.5V operating voltage and 0.3J energy absorption capacity. It has DUAL ENDED terminals, RECTANGULAR PACKAGE shape, and is used for surge protection in SMT applications at temperatures ranging from -40°C to 125°C.
NCP15WF104F03RC
Murata Manufacturing
Murata Manufacturing's NCP15WF104F03RC is a Non-linear Resistor with 100000 ohm resistance, 1% tolerance, and 5V operating voltage. It is used for TEMPERATURE SENSING applications due to its high thermal sensitivity index of 4250 K and wide temperature range from -40°C to 125°C. The thermistor features dual-ended terminals in a surface mount package style for easy installation.
NTCS0805E3103FMT
Vishay Intertechnology
Vishay Intertechnology's NTCS0805E3103FMT is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 3570 K thermal sensitivity index. Ideal for temperature sensing applications, it operates b/w -40 to 150 °C and comes in a SMT package with dual-ended terminals.
SIOV-S20K275
Infineon Technologies
SIOV-S20K275 by Infineon is a METAL OXIDE FILM VARISTOR with 151J energy capacity. It operates at 350V DC/275V RMS, suitable for THROUGH HOLE MOUNT applications. This non-linear resistor in radial package style with Tin/Lead finish is ideal for surge protection in various electronic circuits.
590-33BN01-103
Honeywell Sensing And Control
Honeywell Sensing And Control's 590-33BN01-103 is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and thermal sensitivity index of 3974 K. It is used for temperature sensing applications with a max operating temperature of 125°C and min of -60°C.
NTHS1206N01N1003JE
Vishay Dale
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .28 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
MF-MSMF110/16-2
Bourns
The Bourns MF-MSMF110/16-2 is a PTC resettable fuse with resistance of 0.04 ohm and operating voltage of 16V. It is used for overcurrent protection in various applications, featuring dual-ended terminals and SMT package style for surface mounting. The device has a temperature range from -40°C to 85°C and meets standards like AEC-Q200, CUL, TUV, and UL.
NCP21XV103J03RA
NCP21XV103J03RA by Murata is a Non-linear Resistor with 10000 ohm resistance, operating voltage of 5 V, and thermal sensitivity index of 3900 K. It is used for temperature sensing applications due to its NTC thermistor type, dual-ended terminal placement, and surface mounting type.
NTCS0805E3222JMT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 2200 ohm; Rated Power Dissipation (P): .21 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
RF2577-000
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20 ohm; Rated Power Dissipation (P): .22 W; Maximum Operating Temperature: 85 Cel; Additional Features: RESISTANCE RANGE(MIN-MAX): 7.3-11.1;
B57321V2103J060
TDK
B57321V2103J060 by TDK is a NTC thermistor with 10000 ohm resistance and 5% tolerance. It is used for temperature compensation applications, with a thermal sensitivity index of 3980 K. This surface mount device has a max operating temperature of 125°C and min of -55°C.
RUEF250U
TE Connectivity
TE Connectivity's RUEF250U is a PTC resettable fuse with rated power dissipation of 1.2W and operating voltage of 100V. It is used for temperature sensing applications, featuring radial terminal placement and rectangular package shape. The thermistor has dimensions of 8.1mm x 2.8mm x 16.3mm, suitable for through-hole mounting in various electronic devices.
MICROSMD110F-2
TE Connectivity's MICROSMD110F-2 is a PTC resettable fuse with 2 terminals, rated for 6V AC voltage and 0.8W power dissipation. It is designed for temperature sensing applications, featuring dual-ended terminal placement in a rectangular surface mount package, suitable for use up to 85°C operating temperature.
SMD050F-2
TE Connectivity's SMD050F-2 is a surface mount PTC thermistor with a rectangular package and dual terminal placement. It offers overload protection, operates b/w -40°C to 85°C, and has a rated power dissipation of 1.5W.
2920L300/15DR
2920L300/15DR by Littelfuse is a PTC resettable fuse with resistance of 0.015 ohm, operating voltage of 15V, and dual-ended terminal placement. It is used for overcurrent protection in various applications due to its SMT package style and wraparound terminal shape. The rectangular package measures 7.98mm x 5.44mm x 1.25mm and has a max operating temperature of 85°C.
NANOSMDC150F-2
NANOSMDC150F-2 by TE Connectivity is a PTC thermistor used for overload protection. It has dual-ended terminal placement and a rectangular package shape. The surface mount resistor has matte tin finish with nickel barrier.
V275LA20A
V275LA20A by Littelfuse is a VARISTOR with a rated AC voltage of 275V and max energy absorption of 75J. It operates b/w -55°C to 125°C, suitable for surge protection in various applications like power supplies and industrial equipment. With a radial package style and through-hole mounting, it offers reliable protection against voltage spikes.
LVR100S-240
TE Connectivity's LVR100S-240 is a PTC resettable fuse resistor with a resistance of 0.218 ohm and max operating temperature of 85°C. It is used for temperature sensing applications, has radial terminal placement, and can handle a max circuit RMS voltage of 240V.
NTCS0402E3104FHT
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .07 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
V5.5MLA0603H23
Harris Semiconductor
VARISTOR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MF-SM050-2-99
The Bourns MF-SM050-2-99 is a PTC resettable fuse with a rated power dissipation of 1.7W and rated AC voltage of 60V. It is used for overload protection in various applications, featuring dual-ended terminals and a rectangular package for surface mounting. Operating temperatures range from -40°C to 85°C, making it suitable for diverse environments.
MF-SM050-2
The Bourns MF-SM050-2 is a PTC resettable fuse with a resistance of 0.35 ohm and an operating voltage of 60V. It is used for overcurrent protection in various applications, featuring dual-ended terminal placement and a rectangular SMT package.
MF-SM150/33-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .06 ohm; Maximum Operating Temperature: 85 Cel; Additional Features: RMIN AT 23 DEG CEL; Minimum Operating Temperature: -40 Cel;
MF-SM100-2
The Bourns MF-SM100-2 is a PTC resettable fuse with resistance of 0.12 ohm and operating voltage of 30V. It is used for overcurrent protection in applications requiring dual-ended terminal placement and surface mounting type. The rectangular package measures 7.98mm x 5.44mm x 3mm, suitable for various electronic devices meeting AEC-Q200, CUL, TUV, and UL standards.
MF-SM075/60-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .23 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; Terminal Shape: FLAT;
MF-SM100-2-99
The Bourns MF-SM100-2-99 is a PTC resettable fuse with a resistance of 0.48 ohm and rated AC voltage of 30V. It is used for overload protection in various applications, featuring dual-ended terminal placement and a rectangular package shape.
MF-SM030-2
The Bourns MF-SM030-2 is a PTC resettable fuse with resistance of 0.9 ohm, operating voltage of 60V, and max temp of 85°C. It's used for overcurrent protection in SMT applications with dual-ended terminals and rectangular package shape.
MF-SM100/33-2
The Bourns MF-SM100/33-2 is a PTC resettable fuse with resistance of 0.12 ohm, operating voltage of 33V, and dual-ended terminal placement. It is used for overcurrent protection in various applications due to its SMT package style and AEC-Q200, CUL, TUV, UL reference standards compliance.
MF-SM250-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .024 ohm; Maximum Operating Temperature: 85 Cel; Terminal Finish: MATTE TIN OVER NICKEL; Terminal Placement: DUAL ENDED;
MF-SM030-2-99
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): 1.7 W; Maximum Operating Temperature: 85 Cel; Additional Features: 0.9 TO 4.8 OHMS AT 23 DEG CEL; Terminal Placement: DUAL ENDED;
MF-SM150-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .06 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: FLAT; No. of Terminals: 2;
MF-SM075/60-2-99
Bourns MF-SM075/60-2-99 is a PTC resettable fuse with 60V URac, 1.7W power dissipation, and -40 to 85°C operating range. It's used for overload protection in various applications due to its dual-ended terminals and surface mounting type.
MF-SM100/33-2-99
The Bourns MF-SM100/33-2-99 is a PTC resettable fuse with 33V URac, 1.7W power dissipation, and -40 to 85°C operating range. It's used for overload protection in surface mount applications with dual-ended terminals in a rectangular package.
MF-SM075-2-99
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1 ohm; Rated Power Dissipation (P): 1.7 W; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3;
MF-SMDF050
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .2 ohm; Rated Power Dissipation (P): .9 W; Maximum Operating Temperature: 85 Cel; Additional Features: RMIN AT 23 DEG CEL;
MF-SM075-2
Bourns MF-SM075-2 is a PTC resettable fuse with resistance of 0.23 ohm, operating voltage of 30V, and dual-ended terminals. Ideal for overcurrent protection in various applications due to its SMT package style, matte tin finish, and AEC-Q200 reference standard compliance.
MF-SM013/250-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 6.5 ohm; Maximum Operating Temperature: 85 Cel; Additional Features: RMIN AT 23 DEG CEL; Terminal Placement: DUAL ENDED;
MF-SM125-2
Bourns MF-SM125-2 is a PTC resettable fuse with resistance of 0.07 ohm, operating voltage of 15V, and dual-ended terminals. Ideal for overcurrent protection in various applications due to its SMT package style, matte tin finish, and AEC-Q200 reference standard compliance. Operating temperature range from -40°C to 85°C makes it suitable for diverse environments.
MF-SM100
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): 1.7 W; Maximum Operating Temperature: 85 Cel; Packing Method: TR; Rated Temperature: 125 Cel;
MF-SMDF030
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .45 ohm; Rated Power Dissipation (P): .8 W; Maximum Operating Temperature: 85 Cel; Width (Package): 4.93 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved