Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SLA-M5396-20 by Onsemi is a 16x16 Dot Matrix LED Display with Common Cathode configuration. It operates b/w -20 °C to 50°C, emitting Green-Yellow/Red light at peak wavelength of 660nm. With a display height of 61mm, it's ideal for applications requiring high-resolution visual output.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Kulean Microsystems
Problanco Electronics
SupplyDigital Components
TANS Electronics
Corphita
UHIMA Technologies
Corohmni
Common cathode configuration allows for easier control of the LED display, making it more efficient and user-friendly.
A peak wavelength of 660nm ensures a vibrant and bright display, making it ideal for applications where visibility is key.
The 16 x 16 dot matrix LED display offers high resolution and versatility in displaying various patterns and information, making it suitable for a wide range of applications.
With a maximum operating temperature of 50 °C, this LED display can withstand higher temperatures without compromising performance, ensuring reliability in different environments.
The ability to operate at temperatures as low as -20 °C makes this LED display suitable for use in cold or harsh conditions, increasing its versatility.
The green-yellow/red color output provides clear and distinct display characteristics, making it suitable for applications where color accuracy is important.
The 61mm display height offers good visibility and readability, making it suitable for applications where information needs to be easily seen from a distance.
LED Displays SLA-M5396-20 attributes and parameters. Explore more LED Displays devices from Onsemi
Color At Wavelength:
Configuration:
Display Height:
No. of Characters:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Sub-Category:
SLA-M5396-20 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
Meritek Electronics
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
RC0402FR-0710KL
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Shenzhen Yixinsemi Electronics
TIL311
Ams Ag
LED Displays; Maximum Forward Voltage: 5.5 V; No. of Characters: 1; Maximum Operating Temperature: 85 Cel; Display Height: 7.62 mm; Configuration: N/A;
SL2043T
SL2043T by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It has 4 characters, green color, and 10mm display height. With max forward voltage of 2V, it operates b/w -20 °C to 65°C. Ideal for applications requiring clear numeric displays in various environments.
HDSP-316Y
Hewlett Packard
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -40 Cel; Color: YELLOW; Maximum Forward Voltage: 2.5 V;
SA23-12SRWA
Kingbright Electronic
SA23-12SRWA by Kingbright Electronic is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with 0.03A forward current. Featuring SUPER BRIGHT RED color, it operates b/w -40 to 85 °C and has a display height of 56.9mm. Ideal for applications requiring clear numeric displays in various temperature conditions.
HDSP-7503-DD000
Broadcom
Broadcom's HDSP-7503-DD000 LED display features common cathode configuration, 0.03A max forward current, and 635nm peak wavelength. Ideal for smart/normal numeric displays, it operates b/w -40 to 100°C, with a 7.6mm height and high efficiency red color for applications requiring clear visibility.
SLF716D
LED Displays; Maximum Operating Temperature: 60 Cel; Minimum Operating Temperature: -20 Cel; Peak Wavelength (nm): 558; Color At Wavelength: Green;
HDSP-H103
HDSP-H103 by Broadcom is a COMMON CATHODE LED display with 1 digit and decimal point. Featuring a peak wavelength of 645nm, it's ideal for SMART/NORMAL 7 SEG NUMERIC applications. With a display height of 14.2mm, this RED LED operates b/w -20°C to 100°C efficiently.
HDSP2003LP
Siemens
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: COMPLEX; Display Height: 3.7 mm; Maximum Operating Temperature: 85 Cel; No. of Functions: 4;
HCMS-2975-HI000
Agilent Technologies
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Additional Features: TTL COMPATIBLE; Display Height: 5.08 mm; Maximum Operating Temperature: 85 Cel; No. of Functions: 8; Configuration: COMPLEX;
HDSP-2500
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; Color: ORANGE; No. of Characters: 8; JESD-609 Code: e0;
SLF722D
LED Displays; Peak Wavelength (nm): 558; Color At Wavelength: Green; Maximum Operating Temperature: 60 Cel; Minimum Operating Temperature: -20 Cel;
HDSP-5601
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 1; Peak Wavelength (nm): 566; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Maximum Forward Voltage: 2.5 V;
TIL343
TIL343 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 602nm. Common Cathode configuration, orange color at 13mm display height. Ideal for applications requiring max forward voltage of 3V and operating temperatures from -25°C to 85°C.
BA56-11SURKWA
Kingbright
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 85 Cel; Maximum Forward Current: .03 A; Minimum Operating Temperature: -40 Cel; Color: HYPER RED; No. of Functions: 3;
SC52-11SRWA
Kingbright Electronic's SC52-11SRWA is a COMMON CATHODE 7 SEG NUMERIC LED DISPLAY with peak wavelength of 660nm. It has a max forward current of 0.03A and operates b/w -40 to 85°C. Ideal for applications requiring a SUPER BRIGHT RED display with a height of 13.2mm.
HDSP-A27C
Broadcom's HDSP-A27C LED display features 2 digits with decimal point, common cathode configuration, and a max forward current of 0.05A. Ideal for applications requiring a 16-segment alphanumeric display, it operates b/w -40°C to 105°C and has a display height of 13.8mm.
LDD-C516RI
Lumex
Lumex LDD-C516RI is a COMMON CATHODE 2-digit LED display with peak wavelength of 660nm. It has max forward current of 0.03A and max operating temp of 85°C. Ideal for numeric displays in applications requiring bright red color and compact size.
SL8139
SL8139 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 600nm. It has common anode configuration, red color at wavelength, and 25mm display height. Ideal for applications requiring temperature range from -25 °C to 70°C.
5082-7663
Broadcom's 5082-7663 LED display features COMMON CATHODE configuration, 1 DIGIT WITH DECIMAL POINT. With a peak wavelength of 583nm and max forward current of 0.02A, it is ideal for SMART/NORMAL 7 SEG NUMERIC applications. Operating b/w -40 to 100°C, this YELLOW display has a height of 10.92mm and requires a max forward voltage of 2.5V.
HDSP-2111
HDSP-2111 by Broadcom is a 5x7 dot matrix LED display with peak wavelength of 583nm. It operates b/w -45°C to 85°C, featuring yellow color at wavelength. Ideal for applications requiring complex configurations and displaying up to 8 characters with a 5mm height.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SLA-M5346
16 X 16 DOT MATRIX LED DISPLAY; Color At Wavelength: Green-Yellow/Red; Maximum Operating Temperature: 50 Cel; Display Height: 61 mm; Peak Wavelength (nm): 660; Minimum Operating Temperature: -20 Cel;
SLA-M5355
16 X 16 DOT MATRIX LED DISPLAY; Color At Wavelength: Green-Yellow/Red; Peak Wavelength (nm): 567; Display Height: 32 mm; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: -20 Cel;
SLA-M5365
16 X 16 DOT MATRIX LED DISPLAY; Maximum Operating Temperature: 50 Cel; Configuration: Common Anode; Display Height: 32 mm; Peak Wavelength (nm): 567; No. of Characters: 1;
SLA-M5375
8 X 8 DOT MATRIX LED DISPLAY; Minimum Operating Temperature: -20 Cel; Configuration: Common Anode; Maximum Operating Temperature: 50 Cel; Color At Wavelength: Green/Red; Display Height: 20 mm;
SLA-M5385
8 X 8 DOT MATRIX LED DISPLAY; Display Height: 20 mm; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 50 Cel; No. of Characters: 1; Color At Wavelength: Green/Red;
SLA-M8396-20
16 X 16 DOT MATRIX LED DISPLAY; No. of Characters: 1; Color At Wavelength: Red; Maximum Operating Temperature: 50 Cel; Display Height: 61 mm; Peak Wavelength (nm): 660;
Sanyo Electric
16 X 16 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 660; Configuration: Common Cathode; Minimum Operating Temperature: -20 Cel; Display Height: 61 mm;
16 X 16 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green-Yellow/Red; Display Height: 32 mm; JESD-609 Code: e0; Configuration: Common Anode;
16 X 16 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 1; Peak Wavelength (nm): 567; Configuration: Common Anode; Minimum Operating Temperature: -20 Cel;
SLA-M5396-20
16 X 16 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Color At Wavelength: Green-Yellow/Red; Minimum Operating Temperature: -20 Cel; Display Height: 61 mm;
16 X 16 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 61 mm; No. of Characters: 1; Maximum Operating Temperature: 50 Cel; Peak Wavelength (nm): 660;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved