Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SLA-M5365 by Onsemi is a 16x16 Dot Matrix LED Display with Common Anode configuration. It operates b/w -20 °C to 50°C, emitting Green-Yellow/Red light at peak wavelength of 567nm. Ideal for applications requiring a display height of 32mm in various industries.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
SupplyDigital Components
Problanco Electronics
Kulean Microsystems
TANS Electronics
Corohmni
Corphita
UHIMA Technologies
Common anode configuration ensures efficient power distribution and longer lifespan of the LED display.
Peak wavelength of 567 nm ensures bright and vivid display of green-yellow/red colors.
The dot matrix display allows for high-resolution and versatile display options.
With a maximum operating temperature of 50 °C, this LED display can be used in a variety of environments without overheating.
The wide operating temperature range of -20 °C to 50°C ensures reliable performance even in extreme cold conditions.
The ability to display green-yellow and red colors accurately makes this LED display suitable for a wide range of applications.
The 32 mm display height offers clear visibility and readability of the content being displayed.
LED Displays SLA-M5365 attributes and parameters. Explore more LED Displays devices from Onsemi
Color At Wavelength:
Configuration:
Display Height:
No. of Characters:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Sub-Category:
SLA-M5365 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
1N4148
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
Philips Components
CRCW06031K00FKEAHP
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
5082-7651
Qt Optoelectronics
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 2.5 V; Minimum Operating Temperature: -40 Cel; Peak Wavelength (nm): 635; Maximum Operating Temperature: 85 Cel;
HDSP-523G
Broadcom
HDSP-523G by Broadcom is a 7 SEG NUMERIC LED DISPLAY with COMMON CATHODE configuration. It features 2 digits, peak wavelength of 566nm, and max forward current of 0.03A. Ideal for applications requiring a green color display with 14.2mm height, operating b/w -35°C to 85°C.
HDSP-303E
Agilent Technologies
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 80 Cel; Color At Wavelength: Orange-Red; JESD-609 Code: e0; Display Height: 10 mm;
HDSP7501
Infineon Technologies
Infineon's HDSP7501 is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 635nm. Featuring common anode configuration, it has a display height of 8mm and max forward voltage of 2.5V. Ideal for applications requiring red color output, with operating temperatures ranging from -40°C to 100°C.
LTS-6480G
Lite-on Technology
LTS-6480G by Lite-on Technology is a COMMON CATHODE LED Display with 1 digit and decimal point. Featuring a peak wavelength of 565nm, it operates b/w -35°C to 85°C. Ideal for SMART/NORMAL 7 SEG NUMERIC LED DISPLAY applications due to its green color and display height of 14.2mm.
TIL309
TIL309 by Texas Instruments is a SMART/NORMAL 7 SEG NUMERIC LED DISPLAY with peak wavelength of 660nm. It has a max forward current of 0.001A and display height of 6.45mm. Ideal for applications requiring red color output, operating b/w temperatures of 0-85°C.
SC52-11SRWA
Kingbright
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Display Height: 13.2 mm; Maximum Operating Temperature: 85 Cel; Color: SUPER BRIGHT RED; Configuration: COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT; Additional Features: IC COMPATIBLE;
TIL330
TIL330 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 655nm. It has a display height of 13mm and max forward voltage of 2V. Ideal for applications requiring red color output, operating b/w -25°C to 85°C temperature range.
HDSP-5623
Broadcom's HDSP-5623 LED display features 2 digits with decimal point, common cathode configuration, and peak wavelength of 566nm. Ideal for smart/normal numeric displays, it operates b/w -40°C to 100°C with a max forward current of 0.03A.
HDSP5503
Morrihan International
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Display Height: 14 mm; Peak Wavelength (nm): 635; Configuration: Common Cathode;
SLA1783
Onsemi
SLA1783 by Onsemi is a Common Anode LED Display with peak wavelength of 700nm. It features SMART/NORMAL 5x7 Dot Matrix and operates b/w -20 °C to 50°C. Ideal for applications requiring a 15mm Red display, such as digital clocks or temperature indicators.
TIL328
TIL328 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It operates b/w -25°C to 85°C, displaying green light at 8mm height. With a max forward voltage of 3.5V, it's ideal for applications requiring clear numeric displays in various temperature conditions.
AML92ERY
Honeywell
SINGLE COLOR LED DISPLAY CLUSTER; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 60 Cel; Maximum Forward Current: .015 A; No. of Functions: 1; Color: RED;
DA56-11EWA
Cml Technologies & Kg
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Color: RED; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Display Height: 14.22 mm; Maximum Forward Current: .03 A;
HDSP-4603
HDSP-4603 by Broadcom is a COMMON CATHODE LED Display with 10.92mm height, emitting HIGH PERFORMANCE GREEN light at 566nm wavelength. It operates b/w -40 to 100°C, with a max forward current of 0.03A and voltage of 2.5V, suitable for SMART/NORMAL 7 SEG NUMERIC DISPLAY applications.
DMS-20PC-1-GS-C
Murata Manufacturing
Murata's DMS-20PC-1-GS-C LED display features 0.12A max forward current, 9.4mm height, and SMART/NORMAL 7 SEG numeric type. Ideal for applications requiring a temp range of 0-60°C, such as digital clocks or electronic meters.
HCMS-3906
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 4; Minimum Operating Temperature: -40 Cel; Color At Wavelength: Orange-Red; JESD-609 Code: e0;
DSM7UA20101
Visual Communications Company
7 SEG NUMERIC LED DISPLAY;
SL1284-24
SL1284-24 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with Common Cathode configuration. It operates b/w -25 °C to 70°C, emitting Red light at 700nm wavelength. With a display height of 10mm and max forward voltage of 2.4V, it's ideal for applications requiring compact, bright numeric displays.
TIL392-9
TIL392-9 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with Common Cathode configuration. Featuring peak wavelength of 660nm, it has 9 characters and display height of 3mm. With max forward voltage of 2.1V, it's ideal for applications requiring red color at wavelength, operating b/w -25°C to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SLA-M5346
16 X 16 DOT MATRIX LED DISPLAY; Color At Wavelength: Green-Yellow/Red; Maximum Operating Temperature: 50 Cel; Display Height: 61 mm; Peak Wavelength (nm): 660; Minimum Operating Temperature: -20 Cel;
SLA-M5355
16 X 16 DOT MATRIX LED DISPLAY; Color At Wavelength: Green-Yellow/Red; Peak Wavelength (nm): 567; Display Height: 32 mm; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: -20 Cel;
SLA-M5375
8 X 8 DOT MATRIX LED DISPLAY; Minimum Operating Temperature: -20 Cel; Configuration: Common Anode; Maximum Operating Temperature: 50 Cel; Color At Wavelength: Green/Red; Display Height: 20 mm;
SLA-M5385
8 X 8 DOT MATRIX LED DISPLAY; Display Height: 20 mm; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 50 Cel; No. of Characters: 1; Color At Wavelength: Green/Red;
SLA-M5396-20
16 X 16 DOT MATRIX LED DISPLAY; Color At Wavelength: Green-Yellow/Red; Maximum Operating Temperature: 50 Cel; No. of Characters: 1; Peak Wavelength (nm): 660; Display Height: 61 mm;
SLA-M8396-20
16 X 16 DOT MATRIX LED DISPLAY; No. of Characters: 1; Color At Wavelength: Red; Maximum Operating Temperature: 50 Cel; Display Height: 61 mm; Peak Wavelength (nm): 660;
Sanyo Electric
16 X 16 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 660; Configuration: Common Cathode; Minimum Operating Temperature: -20 Cel; Display Height: 61 mm;
16 X 16 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green-Yellow/Red; Display Height: 32 mm; JESD-609 Code: e0; Configuration: Common Anode;
SLA-M5365
16 X 16 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 1; Peak Wavelength (nm): 567; Configuration: Common Anode; Minimum Operating Temperature: -20 Cel;
16 X 16 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Color At Wavelength: Green-Yellow/Red; Minimum Operating Temperature: -20 Cel; Display Height: 61 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved