Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SLA-M5346 by Onsemi is a 16x16 Dot Matrix LED Display with Common Cathode configuration. It offers peak wavelength of 660nm, ideal for Green-Yellow/Red color display. With a display height of 61mm and operating temperature range from -20 °C to 50°C, it's suitable for various applications requiring vibrant LED displays.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
SupplyDigital Components
Kulean Microsystems
TANS Electronics
Problanco Electronics
UHIMA Technologies
Corohmni
Corphita
Common cathode configuration allows for easier interfacing with other electronic components, making it a versatile choice for various applications.
The specific peak wavelength of 660nm ensures a consistent and vibrant display of the green-yellow/red color for clear visibility.
The dot matrix format provides a high level of customization and flexibility in displaying various characters, symbols, and graphics.
With a maximum operating temperature of 50 °C, this LED display is suitable for use in a wide range of environments without overheating.
The ability to operate in temperatures as low as -20 °C ensures the display remains functional even in cold conditions, making it reliable for outdoor use.
The green-yellow/red color emission at the specified wavelength adds versatility to the display, allowing for distinct and eye-catching visuals.
With a display height of 61mm, this LED display offers a large and easily readable screen size for enhanced visibility and readability from a distance.
LED Displays SLA-M5346 attributes and parameters. Explore more LED Displays devices from Onsemi
Color At Wavelength:
Configuration:
Display Height:
No. of Characters:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Sub-Category:
SLA-M5346 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Nexperia
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
FDD5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
HDSP-5723
Hewlett Packard
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; Maximum Forward Voltage: 2.5 V; Configuration: COMMON CATHODE, 2 DIGITS WITH DECIMAL POINT; Color At Wavelength: Yellow;
SLA5754
SLA5754 by Onsemi is a 16x16 Dot Matrix LED Display with Common Cathode configuration. It operates b/w -20 °C to 50°C, emitting Green/Red light at peak wavelength of 630nm. Ideal for applications requiring a display height of 32mm like digital signage and scoreboards.
MAN6760
Three-five Systems
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 2 V; Color At Wavelength: Red; Configuration: Common Anode; Peak Wavelength (nm): 650;
TIL392-6
Texas Instruments
TIL392-6 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 660nm. It has common cathode configuration, 6 characters, and red color at 3mm display height. With max operating temp of 85°C and min of -25°C, it's ideal for applications requiring high visibility and low power consumption.
SC56-11SRWA
Kingbright Electronic
The Kingbright Electronic SC56-11SRWA is a COMMON CATHODE 7-segment LED display with peak wavelength of 660nm. It has a max forward current of 0.03A and max forward voltage of 2.5V, making it suitable for applications requiring a SUPER BRIGHT RED numeric display up to 85°C, such as digital clocks or timers.
HDSP-7503
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -40 Cel; Color: HIGH EFFICIENCY RED; Color At Wavelength: Red; No. of Functions: 1;
HDSP-U101
Broadcom
HDSP-U101 by Broadcom is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with peak wavelength of 645nm. It operates at temperatures from -20 to 90 °C and has a max forward current of 0.015A. Ideal for applications requiring a RED display with 8mm height, such as digital clocks or electronic meters.
SL1086-53T
SL1086-53T by Onsemi is a 7 SEG NUMERIC LED DISPLAY with Common Cathode configuration. Featuring peak wavelength of 700nm and red color, it has 4 characters with 64mm display height. Ideal for applications requiring temperature range from -20 °C to 50°C.
AML92ERY
Micro Switch
SINGLE COLOR LED DISPLAY CLUSTER; Minimum Operating Temperature: -20 Cel; Color: RED; Maximum Operating Temperature: 60 Cel; No. of Functions: 1; Maximum Forward Current: .015 A;
HDSP-A27C
Agilent Technologies
16 SEG ALPHANUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 2.2 V; Color At Wavelength: Orange-Red; Maximum Forward Current: .05 A; Configuration: COMMON CATHODE, 2 DIGITS WITH DECIMAL POINT;
HDSM-281B
HDSM-281B by Broadcom is a 7-segment numeric LED display with common anode configuration. It has a max forward current of 0.025A and peak wavelength of 462nm, making it ideal for applications requiring blue color displays. With a display height of 7mm and operating temperatures ranging from -40°C to 105°C, this LED display is suitable for various electronic projects.
HDLO-2416-DE000
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Minimum Operating Temperature: -40 Cel; Color: HIGH EFFICIENCY RED; Additional Features: BUILT-IN MEMORY, WITH DECODER/DRIVER; Display Height: 5 mm; Configuration: COMPLEX;
HDSP-5603
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .03 A; No. of Functions: 1; Configuration: COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT; Display Height: 14.2 mm;
TIL804-8
TIL804-8 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with Common Cathode configuration. Featuring peak wavelength of 655nm, it has 8 characters and 7mm display height. With max forward voltage of 2.1V, it's ideal for applications requiring red color output in temperatures ranging from -20°C to 75°C.
LTS-4301JR
Lite-on Technology
LTS-4301JR by Lite-on Technology is a COMMON CATHODE 7-segment LED display with peak wavelength of 639nm. It operates b/w -35°C to 85°C, with max forward current of 0.025A. Ideal for applications requiring a SUPER RED color display with a height of 10mm and forward voltage of 2.6V.
HCMS-3963
Broadcom's HCMS-3963 is a complex LED display with SMART/NORMAL 5x7 dot matrix. Operating temp ranges from -40 to 85°C, terminal finish TIN over NICKEL. Ideal for applications requiring a green display with 4.57mm height, offering versatile functionality in various settings.
HDSP-316Y
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Peak Wavelength (nm): 583; No. of Characters: 1; JESD-609 Code: e1; Maximum Forward Current: .03 A;
TIL393-8
TIL393-8 by Texas Instruments is a Common Cathode 7 SEG NUMERIC LED DISPLAY with peak wavelength of 660nm. It has 8 characters, red color, and 3mm display height. Operating temp ranges from -25°C to 85°C with max forward voltage of 2.1V. Ideal for applications requiring numeric displays in various electronic devices.
SLA6744
SLA6744 by Onsemi is a 16x16 Dot Matrix LED Display with peak wavelength of 610nm. It features common cathode configuration, orange color at wavelength, and 32mm display height. Ideal for applications requiring temperature range from -20 °C to 50°C such as signage and information displays.
HDLG-1414
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 4; Display Height: 3.7 mm; Peak Wavelength (nm): 568; Maximum Operating Temperature: 85 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SLA-M5355
16 X 16 DOT MATRIX LED DISPLAY; Color At Wavelength: Green-Yellow/Red; Peak Wavelength (nm): 567; Display Height: 32 mm; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: -20 Cel;
SLA-M5365
16 X 16 DOT MATRIX LED DISPLAY; Maximum Operating Temperature: 50 Cel; Configuration: Common Anode; Display Height: 32 mm; Peak Wavelength (nm): 567; No. of Characters: 1;
SLA-M5375
8 X 8 DOT MATRIX LED DISPLAY; Minimum Operating Temperature: -20 Cel; Configuration: Common Anode; Maximum Operating Temperature: 50 Cel; Color At Wavelength: Green/Red; Display Height: 20 mm;
SLA-M5385
8 X 8 DOT MATRIX LED DISPLAY; Display Height: 20 mm; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 50 Cel; No. of Characters: 1; Color At Wavelength: Green/Red;
SLA-M5396-20
16 X 16 DOT MATRIX LED DISPLAY; Color At Wavelength: Green-Yellow/Red; Maximum Operating Temperature: 50 Cel; No. of Characters: 1; Peak Wavelength (nm): 660; Display Height: 61 mm;
SLA-M8396-20
16 X 16 DOT MATRIX LED DISPLAY; No. of Characters: 1; Color At Wavelength: Red; Maximum Operating Temperature: 50 Cel; Display Height: 61 mm; Peak Wavelength (nm): 660;
SLA-M5346
Sanyo Electric
16 X 16 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 660; Configuration: Common Cathode; Minimum Operating Temperature: -20 Cel; Display Height: 61 mm;
16 X 16 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green-Yellow/Red; Display Height: 32 mm; JESD-609 Code: e0; Configuration: Common Anode;
16 X 16 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 1; Peak Wavelength (nm): 567; Configuration: Common Anode; Minimum Operating Temperature: -20 Cel;
16 X 16 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Color At Wavelength: Green-Yellow/Red; Minimum Operating Temperature: -20 Cel; Display Height: 61 mm;
16 X 16 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 61 mm; No. of Characters: 1; Maximum Operating Temperature: 50 Cel; Peak Wavelength (nm): 660;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved