Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SL1263-22 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with Common Anode configuration. It operates b/w -20 °C to 75°C, emitting Red light at 700nm peak wavelength. With 2 characters and 14mm display height, it's ideal for temperature-sensitive applications requiring clear numeric displays.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Kulean Microsystems
TANS Electronics
SupplyDigital Components
Problanco Electronics
UHIMA Technologies
Corohmni
Corphita
Common anode configuration allows for easier integration with other common anode devices, simplifying circuit design.
The peak wavelength of 700nm ensures a bright and vibrant red display, making it easily readable in various lighting conditions.
The 7 segment numeric LED display type allows for clear and easy-to-read numeric characters, making it suitable for a wide range of applications.
With a maximum operating temperature of 75 °C, this LED display is suitable for use in a variety of environments without risk of overheating.
The wide range of operating temperatures from -20 °C to 75°C ensures the display can be used in both cold and hot environments without issues.
With 2 characters available, this LED display is ideal for displaying simple numeric information such as time or temperature.
The red color at the wavelength specified ensures excellent visibility and contrast, making it suitable for displaying critical information.
With a display height of 14mm, the characters are large enough to be easily read from a distance, enhancing visibility.
Other Function Optoelectronics SL1263-22 attributes and parameters. Explore more Other Function Optoelectronics devices from Onsemi
Color At Wavelength:
Configuration:
Display Height:
No. of Characters:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Sub-Category:
SL1263-22 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
ITR8307/TR8
Everlight Electronics
OPTOELECTRONIC DEVICE; Terminal Finish: NOT SPECIFIED; Maximum Operating Temperature: 85 Cel; No. of Functions: 2; Minimum Operating Temperature: -25 Cel; Configuration: SEPARATE, 2 ELEMENTS;
YLB2400
Infineon Technologies
Other Optoelectronics; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 583; No. of LEDs in Array: 2; Minimum Luminous Intensity: .006 cd; Color At Wavelength: Yellow;
LCM-S01602DSR/F
Lumex
5X8 DOT MATRIX DISPLAY;
TLP3905(TPR,E(O
Toshiba
Toshiba's TLP3905(TPR,E(O is a single photodiode output optocoupler with 4 terminals. It operates b/w -25°C to 100°C, suitable for various applications. This surface mount device comes in TR packaging and is ideal for optoelectronic functions.
IL300-EF
Siemens
Photodiode Output Optocoupler; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; No. of Elements: 1; Maximum Power Dissipation: .05 W;
TIL300P
OPTOELECTRONIC DEVICE; No. of Functions: 1; Configuration: DUAL, SIMULTANEOUS OPERATION; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel;
HEDL-5540#A02
Agilent Technologies
OPTOELECTRONIC DEVICE; Configuration: SINGLE, 3 CHANNELS; No. of Functions: 1; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 70 Cel;
SFH872
Other Optoelectronics; Maximum Dark Current: 100 nA; No. of Functions: 1; Configuration: SINGLE; Size: 20 mm; Shape: SQUARE;
SRP00245W
OPTOELECTRONIC DEVICE; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0;
IL300-F
Vishay Intertechnology's IL300-F is a dual optocoupler with max. forward current of 0.06A and isolation voltage of 5300V. Ideal for applications requiring photodiode output, it operates b/w -55°C to 100°C, making it suitable for diverse electronic systems.
SRP00264H
5354
Refac Electronics
Other Optoelectronics;
IL300-DEFG-X001
Vishay Semiconductors
OPTOELECTRONIC DEVICE; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -55 Cel; No. of Functions: 1; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e3;
SL1203-20
SL1203-20 by Onsemi is a Common Anode LED with peak wavelength of 700nm. Operating temp range: -25 to 70 °C. Display height: 14mm, color at wavelength: Red. Ideal for digital displays and indicators due to its high visibility and temperature tolerance.
V23845-A4231
OPTOELECTRONIC DEVICE;
PVI1050NSPBF
OPTOELECTRONIC DEVICE; Configuration: SEPARATE, 2 ELEMENTS; Minimum Operating Temperature: -40 Cel; No. of Functions: 2; Maximum Operating Temperature: 85 Cel;
DLP7000FLP
SL1256
SL1256 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 700nm. Common Cathode configuration, red color at 10mm display height. Ideal for applications requiring a max forward voltage of 2.4V in temperatures ranging from -25 to 70 °C.
SML-212U2TT86A
ROHM
ROHM's SML-212U2TT86A LED has a peak wavelength of 625nm, max forward current of 0.03A, and clear lens type. Ideal for applications requiring an orange light source with a max reverse voltage of 5V. Operating temp range from -40°C to 100°C makes it versatile for various environments.
OPI-110B
Bedford Opto Technology
OPI-110B by Bedford Opto Technology is a THROUGH HOLE MOUNT optoelectronic component with 0.04A forward current, 85°C max temp, and 10000V isolation voltage. Ideal for applications requiring fast response time and high isolation levels in temperature-sensitive environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SL1284
7 SEG NUMERIC LED DISPLAY; No. of Characters: 2; Maximum Operating Temperature: 70 Cel; Maximum Forward Voltage: 2.4 V; Display Height: 10 mm; Color At Wavelength: Red;
SL1264-20
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -20 Cel; Color At Wavelength: Red; Configuration: Common Anode; No. of Characters: 2; Peak Wavelength (nm): 700;
SL1255
7 SEG NUMERIC LED DISPLAY; Display Height: 10 mm; Configuration: Common Anode; Maximum Forward Voltage: 2.4 V; Peak Wavelength (nm): 700; No. of Characters: 2;
SL1283-22
7 SEG NUMERIC LED DISPLAY; Configuration: Common Anode; Maximum Forward Voltage: 1.9 V; No. of Characters: 2; Maximum Operating Temperature: 70 Cel; Color At Wavelength: Red;
SL1275-20
7 SEG NUMERIC LED DISPLAY; Display Height: 8 mm; Peak Wavelength (nm): 700; Configuration: Common Anode; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: -25 Cel;
SL1284-20
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 70 Cel; Peak Wavelength (nm): 700; Color At Wavelength: Red; Configuration: Common Cathode; No. of Characters: 2;
Other Optoelectronics; Configuration: Common Anode; Peak Wavelength (nm): 700; Display Height: 14 mm; Color At Wavelength: Red; Minimum Operating Temperature: -25 Cel;
SL1264-22
7 SEG NUMERIC LED DISPLAY; Peak Wavelength (nm): 700; Color At Wavelength: Red; Minimum Operating Temperature: -20 Cel; Configuration: Common Anode; Maximum Operating Temperature: 75 Cel;
7 SEG NUMERIC LED DISPLAY; No. of Characters: 2; Maximum Forward Voltage: 2.4 V; Display Height: 10 mm; Maximum Operating Temperature: 70 Cel; Color At Wavelength: Red;
SL1283-20
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 70 Cel; Color At Wavelength: Red; Display Height: 10 mm; Peak Wavelength (nm): 700; No. of Characters: 2;
SL1276-20
7 SEG NUMERIC LED DISPLAY; No. of Characters: 2; Maximum Operating Temperature: 70 Cel; Peak Wavelength (nm): 700; Color At Wavelength: Red; Minimum Operating Temperature: -25 Cel;
SL1263-20
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -20 Cel; No. of Characters: 2; Peak Wavelength (nm): 700; Maximum Operating Temperature: 75 Cel; Configuration: Common Anode;
SL1283-26
7 SEG NUMERIC LED DISPLAY; Color At Wavelength: Red; Minimum Operating Temperature: -25 Cel; Maximum Forward Voltage: 1.9 V; Configuration: Common Anode; No. of Characters: 2;
SL1204-20
Other Optoelectronics; Peak Wavelength (nm): 700; Color At Wavelength: Red; No. of Characters: 2; Maximum Operating Temperature: 70 Cel; Display Height: 14 mm;
SL1264
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 75 Cel; Display Height: 14 mm; Minimum Operating Temperature: -20 Cel; No. of Characters: 2; Peak Wavelength (nm): 700;
SL1203
7 SEG NUMERIC LED DISPLAY; Color At Wavelength: Red; No. of Characters: 2; Peak Wavelength (nm): 700; Maximum Forward Voltage: 2.4 V; Display Height: 14 mm;
SL1204
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -25 Cel; Display Height: 14 mm; Configuration: Common Cathode; Maximum Forward Voltage: 2.4 V; No. of Characters: 2;
SL1263
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 75 Cel; Configuration: Common Anode; Peak Wavelength (nm): 700; Color At Wavelength: Red; Display Height: 14 mm;
SL1283
7 SEG NUMERIC LED DISPLAY; Peak Wavelength (nm): 700; Display Height: 10 mm; Color At Wavelength: Red; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: -25 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved