Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SL1204-20 by Onsemi is a Common Cathode LED with peak wavelength of 700nm. It operates b/w -25 °C to 70°C, making it suitable for various applications. With red color at wavelength and 14mm display height, it is ideal for electronic displays and indicators.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
SupplyDigital Components
Corphita
TANS Electronics
Problanco Electronics
Kulean Microsystems
Corohmni
UHIMA Technologies
Common cathode configuration allows for easy integration with other electronic components, making it versatile and user-friendly.
The peak wavelength of 700nm ensures that the emitted light is in the red spectrum, making it suitable for applications where red light is preferred or required.
With a maximum operating temperature of 70 °C, this product can withstand high temperatures, making it reliable for various operating conditions.
The minimum operating temperature of -25 °C allows for use in colder environments without compromising performance, ensuring versatility in different settings.
Having 2 characters allows for concise and clear display of information, ideal for applications where space is limited or quick information is needed.
The red color emitted at the specified wavelength provides visibility and can be easily distinguished, making it suitable for applications where red display is preferred.
With a display height of 14mm, the information displayed is easily readable from a distance, enhancing user experience and functionality.
Other Function Optoelectronics SL1204-20 attributes and parameters. Explore more Other Function Optoelectronics devices from Onsemi
Color At Wavelength:
Configuration:
Display Height:
No. of Characters:
Maximum Operating Temperature:
Minimum Operating Temperature:
Peak Wavelength (nm):
Sub-Category:
SL1204-20 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
1N4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
BAV99
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H750VBT6
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
XMLDCL-H0-0000-00A4AAAE5
Cree Led
MULTIPLE COLOR LED;
SRD00224N
Infineon Technologies
OPTOELECTRONIC DEVICE;
LTS312AR
Ledtronics
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 655; JESD-609 Code: e0; Configuration: Common Anode; No. of Characters: 1;
SLA3633
Other Optoelectronics; No. of LEDs in Array: 10; Color At Wavelength: Green; Peak Wavelength (nm): 567;
BP104SR-Z
Osram Opto Semiconductors
Other Optoelectronics;
V23845-B4512
SLP989C51
SLP989C51 by Onsemi is a WATER CLEAR LED with peak wavelength of 630nm. It operates b/w -25 °C to 80°C, with max forward voltage of 2.8V. Ideal for applications requiring red light emission in compact spaces.
SFH2200FAA01
PIN PHOTODIODE;
LATBT676R1+Q2+K2
Other Optoelectronics; Lens Type: CLEAR; Maximum Forward Voltage: 2.6 V; Maximum Forward Current: .03 A; Height: 2.1 mm; Color At Wavelength: 3-Color;
IL300-EF-X017T
Vishay Intertechnology IL300-EF-X017T is a dual optocoupler with max. forward current of 0.06A and isolation voltage of 5300V. Ideal for applications requiring simultaneous operation, it has a surface mount feature and operates b/w -55°C to 100°C.
SPI236-15
SPI236-15 by Onsemi is a Darlington optoelectronic device with 20V max on-state voltage. Operating temp range: -20 to 80 °C, response time: 0.0001s. Ideal for applications requiring through-hole mounting and 2mm gap size.
IL485-X009
OPTOELECTRONIC DEVICE; Maximum Operating Temperature: 100 Cel; No. of Functions: 1; Configuration: COMPLEX; Minimum Operating Temperature: -55 Cel;
S1087-01
Hamamatsu Photonics Kk
The Hamamatsu Photonics Kk S1087-01 is a SINGLE avalanche photodiode with peak wavelength of 960nm. It operates b/w -10°C to 60°C, has min reverse breakdown voltage of 10V, and detects infrared light. Ideal for applications requiring high sensitivity in the IR range.
PSD302-70LM
Other Optoelectronics; Terminal Finish: TIN LEAD; JESD-609 Code: e0;
SFH2270R
AVALANCHE PHOTODIODE;
YLB2400
Other Optoelectronics; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 583; No. of LEDs in Array: 2; Minimum Luminous Intensity: .006 cd; Color At Wavelength: Yellow;
SL2149-30H
SL2149-30H by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It has common anode configuration, 8mm display height, and max forward voltage of 2.8V. Ideal for applications requiring green light emission in temperature range -25 to 70 °C.
LSM670-J1
Other Optoelectronics; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 635; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel;
PVI1050NSPBF
International Rectifier
OPTOELECTRONIC DEVICE; Configuration: SEPARATE, 2 ELEMENTS; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; No. of Functions: 2;
SL2180-22
SL2180-22 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It has common cathode configuration, green color at wavelength, and display height of 8mm. Ideal for applications requiring temp range from -25 °C to 70°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SL1284
7 SEG NUMERIC LED DISPLAY; No. of Characters: 2; Maximum Operating Temperature: 70 Cel; Maximum Forward Voltage: 2.4 V; Display Height: 10 mm; Color At Wavelength: Red;
SL1264-20
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -20 Cel; Color At Wavelength: Red; Configuration: Common Anode; No. of Characters: 2; Peak Wavelength (nm): 700;
SL1255
7 SEG NUMERIC LED DISPLAY; Display Height: 10 mm; Configuration: Common Anode; Maximum Forward Voltage: 2.4 V; Peak Wavelength (nm): 700; No. of Characters: 2;
SL1283-22
7 SEG NUMERIC LED DISPLAY; Configuration: Common Anode; Maximum Forward Voltage: 1.9 V; No. of Characters: 2; Maximum Operating Temperature: 70 Cel; Color At Wavelength: Red;
SL1275-20
7 SEG NUMERIC LED DISPLAY; Display Height: 8 mm; Peak Wavelength (nm): 700; Configuration: Common Anode; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: -25 Cel;
SL1263-22
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 75 Cel; No. of Characters: 2; Color At Wavelength: Red; Configuration: Common Anode;
SL1284-20
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 70 Cel; Peak Wavelength (nm): 700; Color At Wavelength: Red; Configuration: Common Cathode; No. of Characters: 2;
SL1203-20
Other Optoelectronics; Configuration: Common Anode; Peak Wavelength (nm): 700; Display Height: 14 mm; Color At Wavelength: Red; Minimum Operating Temperature: -25 Cel;
SL1264-22
7 SEG NUMERIC LED DISPLAY; Peak Wavelength (nm): 700; Color At Wavelength: Red; Minimum Operating Temperature: -20 Cel; Configuration: Common Anode; Maximum Operating Temperature: 75 Cel;
SL1256
7 SEG NUMERIC LED DISPLAY; No. of Characters: 2; Maximum Forward Voltage: 2.4 V; Display Height: 10 mm; Maximum Operating Temperature: 70 Cel; Color At Wavelength: Red;
SL1283-20
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 70 Cel; Color At Wavelength: Red; Display Height: 10 mm; Peak Wavelength (nm): 700; No. of Characters: 2;
SL1276-20
7 SEG NUMERIC LED DISPLAY; No. of Characters: 2; Maximum Operating Temperature: 70 Cel; Peak Wavelength (nm): 700; Color At Wavelength: Red; Minimum Operating Temperature: -25 Cel;
SL1263-20
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -20 Cel; No. of Characters: 2; Peak Wavelength (nm): 700; Maximum Operating Temperature: 75 Cel; Configuration: Common Anode;
SL1283-26
7 SEG NUMERIC LED DISPLAY; Color At Wavelength: Red; Minimum Operating Temperature: -25 Cel; Maximum Forward Voltage: 1.9 V; Configuration: Common Anode; No. of Characters: 2;
SL1264
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 75 Cel; Display Height: 14 mm; Minimum Operating Temperature: -20 Cel; No. of Characters: 2; Peak Wavelength (nm): 700;
SL1203
7 SEG NUMERIC LED DISPLAY; Color At Wavelength: Red; No. of Characters: 2; Peak Wavelength (nm): 700; Maximum Forward Voltage: 2.4 V; Display Height: 14 mm;
SL1204
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -25 Cel; Display Height: 14 mm; Configuration: Common Cathode; Maximum Forward Voltage: 2.4 V; No. of Characters: 2;
SL1263
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 75 Cel; Configuration: Common Anode; Peak Wavelength (nm): 700; Color At Wavelength: Red; Display Height: 14 mm;
SL1283
7 SEG NUMERIC LED DISPLAY; Peak Wavelength (nm): 700; Display Height: 10 mm; Color At Wavelength: Red; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: -25 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved