Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SL1203-20 by Onsemi is a Common Anode LED with peak wavelength of 700nm. Operating temp range: -25 to 70 °C. Display height: 14mm, color at wavelength: Red. Ideal for digital displays and indicators due to its high visibility and temperature tolerance.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
SupplyDigital Components
Problanco Electronics
Kulean Microsystems
Corphita
UHIMA Technologies
Corohmni
TANS Electronics
Common Anode configuration provides reliable and consistent operation, ensuring stable performance of the optoelectronic component.
The peak wavelength of 700 nm indicates that this optoelectronic component emits red light, making it suitable for applications where red light output is desired.
With a maximum operating temperature of 70 °C, this product can withstand high temperature environments, increasing its versatility for various applications.
The minimum operating temperature of -25 °C ensures that the optoelectronic component can function effectively even in cold conditions, expanding its usability across different environments.
The availability of 2 characters ensures that this optoelectronic component can display concise information, making it ideal for applications where space is limited.
The red color emitted at the specified wavelength adds visual appeal to the optoelectronic component and can be used for signaling or display purposes effectively.
The generous display height of 14 mm allows for clear visibility and readability of information displayed by the optoelectronic component, enhancing user experience.
Other Function Optoelectronics SL1203-20 attributes and parameters. Explore more Other Function Optoelectronics devices from Onsemi
Color At Wavelength:
Configuration:
Display Height:
No. of Characters:
Maximum Operating Temperature:
Minimum Operating Temperature:
Peak Wavelength (nm):
Sub-Category:
SL1203-20 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
Philips Semiconductors
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
Changzhou Galaxy Century Microelectronics
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
OPA2277UA/2K5
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
Ksl Microdevices
Vicor
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
IL300-EF-X007
Vishay Intertechnology IL300-EF-X007 is a dual optoelectronic device with 0.06A forward current and 5300V isolation voltage. Ideal for surface mount applications, it operates b/w -55°C to 100°C, making it suitable for various electronic systems requiring simultaneous operation in harsh environments.
S1087-01
Hamamatsu Photonics Kk
The Hamamatsu Photonics Kk S1087-01 is a SINGLE avalanche photodiode with peak wavelength of 960nm. It operates b/w -10°C to 60°C, has min reverse breakdown voltage of 10V, and detects infrared light. Ideal for applications requiring high sensitivity in the IR range.
DLP3010AFQK
OPTOELECTRONIC DEVICE; Terminal Finish: NICKEL GOLD; Configuration: COMPLEX; No. of Functions: 1; Minimum Operating Temperature: -20 Cel; JESD-609 Code: e4;
SL1283
SL1283 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with Common Anode configuration. It operates b/w -25 °C to 70°C, emitting Red light at 700nm peak wavelength. With a display height of 10mm and max forward voltage of 2.4V, it's ideal for applications requiring compact, high-visibility numeric displays.
IDA3416-20
Infineon Technologies
OPTOELECTRONIC DEVICE; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 65 Cel; No. of Functions: 20;
TLP190B(TPR)
Toshiba
Toshiba's TLP190B(TPR) is a single optoelectronic device with 4 terminals. It operates b/w -40°C to 85°C, suitable for surface mount applications. Terminal finish is Tin/Lead (Sn/Pb), packed in TR format, ideal for various electronic functions.
NSL-4960
Advanced Photonix
OPTOELECTRONIC DEVICE; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0;
TLP627-2(T)
Toshiba's TLP627-2(T) optoelectronic component has a max forward current of 0.05A, min operating temp of -55°C, and max isolation voltage of 5000V. Ideal for applications requiring high current transfer ratio, such as industrial control systems and power supplies.
PSD314R-90LM
Other Optoelectronics; Terminal Finish: TIN LEAD; JESD-609 Code: e0;
DLP3010FQK
OPTOELECTRONIC DEVICE;
SRD00214N
PIN PHOTODIODE; Mounting Feature: THROUGH HOLE MOUNT; Maximum Dark Current: 50 nA; Maximum Operating Temperature: 85 Cel; Semiconductor Material: InGaAs/InP; Maximum Reverse Voltage: 20 V;
SL2189-20
SL2189-20 by Onsemi is a Common Anode 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It operates b/w -25 °C to 70°C, displaying green light at an 8mm height. Ideal for applications requiring clear numeric display in various temperature conditions.
SL2284-20
SL2284-20 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. Common Cathode configuration, green color at 10mm display height. Operating temp range -25 to 70 °C, max forward voltage of 2.8V. Ideal for applications requiring compact numeric displays.
LTT773-Q2R2-5
Other Optoelectronics; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Peak Wavelength (nm): 523; Maximum Forward Voltage: 4.2 V;
5082-7651
Cml Technologies & Kg
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; Configuration: Common Anode; No. of Characters: 1; JESD-609 Code: e0;
SL1149-30H
SL1149-30H by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 700nm. It has common anode configuration, red color at wavelength, and 8mm display height. Operating temp ranges from -25 °C to 70°C with max forward voltage of 2.4V. Ideal for applications requiring numeric displays in various electronic devices.
SRP00254O
IL300-DEFG-X001
Photodiode Output Optocoupler; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5300 V; Configuration: DUAL, SIMULTANEOUS OPERATION; Maximum Forward Current: .06 A;
TIL913A
TIL913A by Texas Instruments is a dual optoelectronic component with 50% min current transfer ratio, 1.4V max forward voltage, and 0.15W max power dissipation. Ideal for applications requiring fast response times, high isolation voltage of 3500V, and through-hole mounting feature.
MICRORD-10035-MLP-TR1
Other Optoelectronics;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SL1284
7 SEG NUMERIC LED DISPLAY; No. of Characters: 2; Maximum Operating Temperature: 70 Cel; Maximum Forward Voltage: 2.4 V; Display Height: 10 mm; Color At Wavelength: Red;
SL1264-20
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -20 Cel; Color At Wavelength: Red; Configuration: Common Anode; No. of Characters: 2; Peak Wavelength (nm): 700;
SL1255
7 SEG NUMERIC LED DISPLAY; Display Height: 10 mm; Configuration: Common Anode; Maximum Forward Voltage: 2.4 V; Peak Wavelength (nm): 700; No. of Characters: 2;
SL1283-22
7 SEG NUMERIC LED DISPLAY; Configuration: Common Anode; Maximum Forward Voltage: 1.9 V; No. of Characters: 2; Maximum Operating Temperature: 70 Cel; Color At Wavelength: Red;
SL1275-20
7 SEG NUMERIC LED DISPLAY; Display Height: 8 mm; Peak Wavelength (nm): 700; Configuration: Common Anode; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: -25 Cel;
SL1263-22
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 75 Cel; No. of Characters: 2; Color At Wavelength: Red; Configuration: Common Anode;
SL1284-20
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 70 Cel; Peak Wavelength (nm): 700; Color At Wavelength: Red; Configuration: Common Cathode; No. of Characters: 2;
SL1264-22
7 SEG NUMERIC LED DISPLAY; Peak Wavelength (nm): 700; Color At Wavelength: Red; Minimum Operating Temperature: -20 Cel; Configuration: Common Anode; Maximum Operating Temperature: 75 Cel;
SL1256
7 SEG NUMERIC LED DISPLAY; No. of Characters: 2; Maximum Forward Voltage: 2.4 V; Display Height: 10 mm; Maximum Operating Temperature: 70 Cel; Color At Wavelength: Red;
SL1283-20
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 70 Cel; Color At Wavelength: Red; Display Height: 10 mm; Peak Wavelength (nm): 700; No. of Characters: 2;
SL1276-20
7 SEG NUMERIC LED DISPLAY; No. of Characters: 2; Maximum Operating Temperature: 70 Cel; Peak Wavelength (nm): 700; Color At Wavelength: Red; Minimum Operating Temperature: -25 Cel;
SL1263-20
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -20 Cel; No. of Characters: 2; Peak Wavelength (nm): 700; Maximum Operating Temperature: 75 Cel; Configuration: Common Anode;
SL1283-26
7 SEG NUMERIC LED DISPLAY; Color At Wavelength: Red; Minimum Operating Temperature: -25 Cel; Maximum Forward Voltage: 1.9 V; Configuration: Common Anode; No. of Characters: 2;
SL1204-20
Other Optoelectronics; Peak Wavelength (nm): 700; Color At Wavelength: Red; No. of Characters: 2; Maximum Operating Temperature: 70 Cel; Display Height: 14 mm;
SL1264
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 75 Cel; Display Height: 14 mm; Minimum Operating Temperature: -20 Cel; No. of Characters: 2; Peak Wavelength (nm): 700;
SL1203
7 SEG NUMERIC LED DISPLAY; Color At Wavelength: Red; No. of Characters: 2; Peak Wavelength (nm): 700; Maximum Forward Voltage: 2.4 V; Display Height: 14 mm;
SL1204
7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -25 Cel; Display Height: 14 mm; Configuration: Common Cathode; Maximum Forward Voltage: 2.4 V; No. of Characters: 2;
SL1263
7 SEG NUMERIC LED DISPLAY; Maximum Operating Temperature: 75 Cel; Configuration: Common Anode; Peak Wavelength (nm): 700; Color At Wavelength: Red; Display Height: 14 mm;
7 SEG NUMERIC LED DISPLAY; Peak Wavelength (nm): 700; Display Height: 10 mm; Color At Wavelength: Red; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: -25 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved