Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NP1100SCMCT3G by Onsemi is a silicon surge protector with a non-repetitive peak on-state current of 30A. It features a max DC off-state voltage of 90V and operates b/w -55 °C to 150°C. Ideal for applications requiring protection against surges in electronic circuits.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
AZTECH Wire
$11.000
Component Stockers USA
$99.990
Kepictronics
Kulean Microsystems
Problanco Electronics
TANS Electronics
Corphita
SupplyDigital Components
Corohmni
UHIMA Technologies
Provides durability and protection for the internal components of the surge protector.
Simplified design for easy installation and use.
High current handling capability for effective surge protection.
Allows for convenient mounting on circuit boards or other surfaces.
Suitable for protecting against surges with voltage levels within this range.
Reliable triggering mechanism for fast response to surge events.
Silicon Surge Protectors NP1100SCMCT3G attributes and parameters. Explore more Silicon Surge Protectors devices from Onsemi
Maximum Breakdown Voltage:
Configuration:
Maximum DC Off-state Voltage:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
Non Repetitive Peak On-state Current:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Reference Standard:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
NP1100SCMCT3G Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
PCN Obsolescence/ EOL - Multiple Devices 19/Jul/2012
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
Nte Electronics
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
C1206C104M5RACTU
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
TISP4082F3LMR
TISP4082F3LMR by Texas Instruments is a single silicon surge protector with 4A peak current and 82V breakdown voltage. Ideal for protecting circuits from surges, it operates b/w -40°C to 150°C. Its cylindrical package with through-hole terminals makes it suitable for various applications in electronics.
SP723AP
Harris Semiconductor
SILICON SURGE PROTECTOR; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: DUAL; Configuration: COMPLEX; Terminal Finish: Tin/Lead (Sn/Pb);
TISP7290F3DR
TISP7290F3DR by Texas Instruments is a 3-element surge protector with 4.3A peak current, 220V DC voltage, and 290V breakdown voltage. It is a thyristor surge protector in a small outline package for surge protection applications. Operates b/w 0-70°C temperature range and UL recognized for reliability.
ETP01-2821RL
STMicroelectronics
STMicroelectronics ETP01-2821RL is a Silicon Surge Protector with 36V breakdown voltage, 30mA holding current, and -55 to 150°C operating temperature range. It's surface-mountable and ideal for protecting electronic circuits from voltage spikes in various applications.
TBU-CA050-500-WH
Bourns
SILICON SURGE PROTECTOR; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 40; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260;
FLC01-200D
FLC01-200D by STMicroelectronics is a Silicon Surge Protector with 5A Non Repetitive Peak On-state Current, 206V Min Breakdown Voltage, and 0.01mA Max Leakage Current. It is used for surge protection in various applications like power supplies and industrial equipment due to its built-in diode and resistor configuration.
NP2300GARLG
Onsemi
NP2300GARLG by Onsemi is a single silicon surge protector with 2 wire terminals. It has a max DC off-state voltage of 190V and a max breakdown voltage of 260V. This thyristor surge protector is UL recognized and commonly used for isolating case connections in various applications.
TISP5115H3BJR
TISP5115H3BJR by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current. It operates b/w -40°C to 150°C, has a max breakdown voltage of 115V, and is UL recognized. Ideal for protecting electronic devices from power surges in various applications.
TISP2380F3DR
TISP2380F3DR by Texas Instruments is a silicon surge protector with 3 delta-connected elements. It has a non-repetitive peak on-state current of 4A and max breakdown voltage of 380V. Ideal for applications requiring protection against voltage surges, it features a small outline package style and Gull Wing terminal form for surface mount installation.
FLC01-200B-TR
FLC01-200B-TR by STMicroelectronics is a silicon surge protector designed for surface mount applications. It features a min breakdown voltage of 206 V, max operating temp of 150 °C, and built-in diode/resistor configuration. Ideal for protecting sensitive electronics from voltage spikes.
NP0720SBT3G
NP0720SBT3G by Onsemi is a single silicon surge protector with 2 terminals, max breakdown voltage of 88V, and trigger device type as thyristor. It operates b/w -40 to 150 °C and is surface mountable. Ideal for UL recognized applications requiring protection against surges.
TPA100A-12-RL
STMicroelectronics TPA100A-12-RL is a single silicon surge protector with 30A non-repetitive peak on-state current. Its package is made of plastic/epoxy, featuring wire terminals and matte tin finish. Ideal for applications requiring isolated case connection and max breakdown voltage of 133V.
TISP4180H3LP
TISP4180H3LP by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current and 180V max breakdown voltage. It features a cylindrical package style, wire terminals, and thyristor surge protection. Ideal for safeguarding electronic devices from voltage spikes in various applications.
TISP3125F3SL
TISP3125F3SL by Texas Instruments is a silicon surge protector with 6A non-repetitive peak on-state current. It features a series connected, center tap configuration and has a max DC off-state voltage of 100V. Ideal for protecting electronic devices from power surges in various applications.
TISP4082
TISP4082 by Texas Instruments is a single silicon surge protector with 10A non-repetitive peak on-state current and 82V max breakdown voltage. It is used for surge protection in various applications, featuring a plastic/epoxy package body material and UL recognized reference standard.
TISP3125F3DR
TISP3125F3DR by Texas Instruments is a Silicon Surge Protector with 4A Non Repetitive Peak On-state Current. It features SERIES CONNECTED, CENTER TAP configuration and 100V Max DC Off-state Voltage. Ideal for surge protection in electronic circuits, it is a UL RECOGNIZED THYRISTOR SURGE PROTECTOR suitable for surface mount applications.
NP3100SBT3G
The Onsemi NP3100SBT3G is a single silicon surge protector with 275V DC off-state voltage and 150 °C max operating temp. It features a thyristor surge protector trigger device, UL recognized for protection applications in electronics against power surges. The package is small outline, surface mountable with dual terminals and tin finish for robust circuit protection.
TISP4350H3BJ
TISP4350H3BJ by Texas Instruments is a single silicon surge protector with 60A peak current, 255V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in various applications due to its thyristor surge protection design and UL recognition.
MMT10B230T3
The Onsemi MMT10B230T3 is a silicon surge protector with a max DC off-state voltage of 170V and trigger device type as thyristor. It operates b/w -40 to 175 °C, making it suitable for applications requiring protection against voltage surges in electronic circuits.
TISP4250H3BJ
TISP4250H3BJ by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak current. It features a max breakdown voltage of 250V and operates b/w -40°C to 150°C. Ideal for protecting electronic devices from power surges in various applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NP1100GARLG
THYRISTOR SURGE PROTECTOR; Package Style (Meter): LONG FORM; Surface Mount: NO; Terminal Position: AXIAL; Configuration: SINGLE; Case Connection: ISOLATED;
NP1100GBRLG
NP1100SAMCT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Terminal Form: C BEND;
NP1100SAT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum Holding Current: 150 mA;
NP1100SBMCT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Peak Reflow Temperature (C): 260;
NP1100SBT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Package Shape: RECTANGULAR;
NP1100SCT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JESD-30 Code: R-PDSO-C2;
NP1100SET3G
THYRISTOR SURGE PROTECTOR; Surface Mount: YES; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 150 Cel; Maximum Holding Current: 150 mA; Maximum Breakdown Voltage: 130 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved