Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NLAS4053DTR2 by Onsemi is a 3-function CMOS multiplexer with 16 terminals. It operates b/w -55 to 125 °C and has a max on-state resistance of 37 ohm. Ideal for military-grade applications requiring low signal current and high off-state isolation.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
AZTECH Wire
$14.090
SupplyDigital Components
TANS Electronics
Microchip USA
Problanco Electronics
Corphita
Kulean Microsystems
UHIMA Technologies
Vigor
Corohmni
Provides durability and protection for the internal components of the multiplexer, ensuring a longer lifespan.
Allows for easy installation on circuit boards, saving time and effort during the assembly process.
Provides versatility and flexibility in signal routing and selection, making it suitable for various applications.
Operates at a common voltage level, making it compatible with a wide range of systems and power sources.
Can withstand high temperatures without compromising performance, suitable for industrial and harsh environments.
Utilizes CMOS technology for low power consumption and high noise immunity, ensuring reliable operation and efficiency.
Multiplexers & Switches NLAS4053DTR2 attributes and parameters. Explore more Multiplexers & Switches devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Negative Supply Voltage (Vsup):
Minimum Negative Supply Voltage (Vsup):
Nominal Negative Supply Voltage (Vsup):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Maximum Signal Current:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
NLAS4053DTR2 Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
Yangzhou Yangjie Electronics
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Rochester Electronics
Diotec Semiconductor Ag
NE555D
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
NC7WZ17P6X
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
4554
Jw Miller Magnetics
Other Semiconductors;
Silicon Standard
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
ADG621BRMZ-REEL
Analog Devices
ADG621BRMZ-REEL by Analog Devices is a CMOS SPST switch with 2 functions, operating at -40 to 85°C. It has a max on-state resistance of 5.5 ohm and switching voltage of 5V, suitable for industrial applications requiring high isolation and fast switching times. The small outline package with dual terminals makes it ideal for space-constrained designs needing reliable signal routing.
TC4066BP(N,F)
Toshiba
SPST;
CD4053BPW
Texas Instruments
CD4053BPW by Texas Instruments is a CMOS multiplexer with 3 functions, operating at -55 to 125 °C. It has a supply voltage range of 3-20 V, on-state resistance of 1050 ohm, and bandwidth of 30 kHz. Ideal for military-grade applications requiring low power consumption and high isolation levels.
ADG1407BRUZ-REEL7
ADG1407BRUZ-REEL7 by Analog Devices is an 8-channel CMOS differential multiplexer with a max on-state resistance of 25 ohm. It operates at a nominal voltage of 5V and can handle power supplies ranging from +-15V to +-5V. With a small outline package style, it is ideal for automotive applications requiring precise signal switching in tight spaces.
SN74LVC1G3157DCKR
SN74LVC1G3157DCKR by Texas Instruments is a SPDT switch with 6 terminals, operating at a voltage range of 1.65V to 5.5V. It offers a max on-state resistance of 30 ohm and a bandwidth of 340 kHz, suitable for industrial applications requiring fast switching times and high isolation levels. The package style is small outline with thin profile, making it ideal for space-constrained designs.
74HCT4051DB,118
NXP Semiconductors' 74HCT4051DB,118 is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 4.5V to 5.5V and offers a max on-state resistance of 180 ohm. Ideal for automotive applications, this switch has a small outline package style and nickel/palladium/gold terminal finish.
MAX14757EUE+T
Maxim Integrated
DPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SN74LV4051APWRG4
SN74LV4051APWRG4 by Texas Instruments is a CMOS single-ended multiplexer with 16 terminals. It operates at a supply voltage range of 2-5.5V and offers a max on-state resistance of 225 ohm. With a nominal bandwidth of 35 kHz, it is ideal for industrial applications requiring high-speed signal switching in compact designs.
DG412DY
Harris Semiconductor
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74HC4052DB,118
NXP Semiconductors' 74HC4052DB,118 is a CMOS differential multiplexer with 4 channels. It operates at a supply voltage range of 1V to 5V and offers a max on-state resistance of 195 ohm. Ideal for automotive applications, this small-outline switch has a fast switching time of 69 ns and high off-state isolation of 50 dB.
PCA9548ADWR
PCA9548ADWR by Texas Instruments is a multiplexer with 2 functions. It has a small outline package style and operates at temperatures ranging from -40 to 85 °C. It is commonly used for single-ended multiplexing applications.
HEF4051BT,653
HEF4051BT,653 by NXP Semiconductors is an 8-channel CMOS multiplexer with a max on-state resistance of 175 ohm and switching type of BREAK-BEFORE-MAKE. It operates at a nominal voltage range of 3V to 15V, making it suitable for industrial temperature grade applications requiring low power consumption and high isolation levels.
TMUX1574RSVR
TMUX1574RSVR by Texas Instruments is a SPDT multiplexer with 16 terminals in a chip carrier package. It operates b/w -40 to 125 °C, with an on-state resistance of 4.5 ohm and nominal bandwidth of 2000 kHz. Ideal for automotive applications requiring low supply current and high channel count.
MAX4709ESE+
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74HC4051PW-Q100,11
Nexperia
DIFFERENTIAL MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG1604BCPZ-REEL
ADG1604BCPZ-REEL by Analog Devices is a CMOS single-ended multiplexer with 4 channels. It operates at -40 to 125 °C and has a max on-state resistance of 1.2 ohm. Ideal for automotive applications, it features a very thin profile chip carrier package and offers break-before-make switching.
SN74LV4052ATPWRQ1
SN74LV4052ATPWRQ1 by Texas Instruments is a CMOS differential multiplexer with 2 channels, operating at a supply voltage range of 2V to 5.5V. It features a max on-state resistance of 225 ohm, fast switch-on/off times of 25 ns, and an off-state isolation of 45 dB. Ideal for industrial applications requiring precise signal routing in compact spaces.
ADG1434YRUZ-REEL7
ADG1434YRUZ-REEL7 by Analog Devices is a 20-terminal SPDT switch with 4 channels. It operates at -40 to 125 °C, suitable for automotive applications. With a max on-state resistance of 9 ohm and switching time of 545 ns, it offers reliable performance in various electronic systems.
ADG884BRMZ-REEL
ADG884BRMZ-REEL by Analog Devices is a CMOS audio/video switch with 2 functions, 0.5 ohm Ron, and 60 dB isolation. It operates b/w -40 to 85 °C and has a supply voltage range of 1.8V to 5.5V. Ideal for industrial applications requiring fast switching times and low on-state resistance.
SN74LVC1G3157YZPR
SN74LVC1G3157YZPR by Texas Instruments is a SPDT switch with 1 channel, 30 ohm Ron, and 340 kHz bandwidth. It operates at -40 to 85 °C and has a very thin profile package style. Ideal for industrial applications requiring low on-state resistance and high isolation levels.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NLASB3157DFT2G
NLASB3157DFT2G by Onsemi is a SPDT switch with 6 terminals, operating b/w -55 to 125 °C. It has a max on-state resistance of 15 ohm and offers 57 dB off-state isolation. Ideal for military-grade applications requiring fast switching times and low power consumption.
NLAS4157DFT2G
NLAS4157DFT2G by Onsemi is a SPDT switch with 6 terminals, operating from -40 to 85°C. It has a low on-state resistance of 4 ohm and provides 52 dB isolation. Ideal for industrial applications requiring fast switching times and high reliability in a compact package.
NLASB3157DFT2GH
SPDT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
NLAS4684MR2G
SPDT; Temperature Grade: MILITARY; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
NLAST4599DTT1G
SPDT; Temperature Grade: MILITARY; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NLAS4599DTT1G
NLAS4684FCT1G
NLAS4684FCT1G by Onsemi is a SPDT switch with 2 functions, operating at -55 to 125 °C. It has a low on-state resistance of 1 ohm and provides 65 dB isolation. Ideal for military-grade applications requiring fast switching times and precise control in compact spaces.
NLAS4684MNR2G
SPDT; Temperature Grade: MILITARY; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
NLAS5223BMNR2G
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: VQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
NLAS4599DFT2G
NLAST4051DTR2G
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NLAS5123MNR2G
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: VSON; Package Shape: RECTANGULAR; Surface Mount: YES;
NLAST4599DFT2G
NLAST4599DFT2G by Onsemi is a SPDT multiplexer with 6 terminals, operating at -55 to 125°C. It has a supply voltage range of 2-5.5V and offers fast switching times of 25ns on and 15ns off. Ideal for military-grade applications requiring high isolation (93dB) in a compact SOT package.
NLAS4053DR2G
NLAS4053DR2G by Onsemi is a CMOS multiplexer with 3 functions. It has a small outline package style and operates at temperatures ranging from -55 to 125 °C. This device is commonly used in military applications due to its temperature grade and compact size.
NLAS5223BLMNR2G
NLAS3899BMNTBG
DPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: VQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
NLAS4783BMN1R2G
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
NLAS1053USG
NLAS1053USG by Onsemi is a CMOS single-ended multiplexer with 2 channels. It operates at temperatures from -55 to 125 °C and has a max supply voltage of 5.5 V. With a nominal off-state isolation of 93 dB, it is ideal for military-grade applications requiring precise signal switching in compact spaces.
NLAS323USG
SPST; Temperature Grade: MILITARY; No. of Terminals: 8; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NLAS2066USG
NLAS2066USG by Onsemi is a CMOS SPST switch with 2 functions, operating at -55 to 125 °C. It has a max on-state resistance of 50 ohm and nominal off-state isolation of 73 dB. Ideal for military-grade applications requiring fast switching times and low power consumption.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved