Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV78763MW4R2G by Onsemi is a Graphics Display Driver with 32 terminals, operating at -40 to 150 °C. It has a supply voltage range of 3.15V to 3.4V and a max supply current of 15mA. This LED display driver is ideal for automotive applications due to its AEC-Q100 screening level and compact chip carrier package style.
Median Price
$2.365
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Flip Electronics (Authorized)
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Rochester
$2.230
$2.000
$1.880
Verical
$2.500
$2.350
Digiode
$2.356
Flip Electronics
Vyrian
Ampacity Inc.
$2.110
Corphita
$2.232
Corohmni
$2.480
AZTECH Wire
$17.450
Perfect Parts
RC Electronics
TANS Electronics
Kepictronics
Kulean Microsystems
SupplyDigital Components
Authorized Procurement Solutions
Problanco Electronics
Microchip USA
UHIMA Technologies
Vigor
This material provides durability and protection for the internal components, making the product reliable for long-term use.
Allows for a wide range of voltage inputs, ensuring compatibility with various power sources.
Compliance with automotive standards ensures high quality and reliability for use in automotive applications.
Can withstand high temperatures, making it suitable for use in environments where heat may be a concern.
Provides a reliable and corrosion-resistant finish for the terminals, ensuring long-term functionality.
High frequency response enables fast operation and high performance for driving LED displays.
Graphics Display Drivers NCV78763MW4R2G attributes and parameters. Explore more Graphics Display Drivers devices from Onsemi
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Screening Level:
Maximum Seated Height:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
Minimum fmax:
NCV78763MW4R2G Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 10/Mar/2021
PCN Design/Specification - NCV78763 Datasheet Rev 14/Mar/2018
PCN Assembly/Origin - NCV78763MW Wafer Fab Add 9/Nov/2018
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
International Devices
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
Kingwell Technonlogy
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Weitron Technology
MC14489BPE
NXP Semiconductors
MC14489BPE by NXP Semiconductors is a 5V LED display driver with 8 segments and 5-digit capability. It operates in serial data input mode, suitable for graphics displays requiring multiplexed capabilities. The rectangular package has 20 terminals, making it ideal for applications needing high-quality segment display control.
LT3476EUHF
Linear Technology
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: NO LEAD; No. of Terminals: 38; Package Code: HVQCCN; Package Shape: RECTANGULAR;
LM3410XMY/NOPB
National Semiconductor
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
ICM7218BIJI
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 28; Package Shape: RECTANGULAR; Terminal Position: DUAL;
TPS92641PWPR/NOPB
Texas Instruments
TPS92641PWPR/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 85V and power supplies of 24V. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications. With constant-current output characteristics, this LED display driver has a terminal pitch of 0.65mm and is designed for surface mount installation.
PCA9632TK
PCA9632TK by NXP Semiconductors is a LED display driver with 4 segments, operating at 1 MHz. It has a serial data input mode and supports supply voltages of 2.5V to 5V. Ideal for industrial applications requiring precise control over LED displays in a compact form factor.
PCA9685BS
PCA9685BS by NXP Semiconductors is a Graphics Display Driver with 16 segments, SERIAL data input mode, and 1 MHz min fmax. It is ideal for LED display driver applications due to its industrial temperature grade, quad terminal position, and very thin profile package style.
MAX16834AUP/V+T
Maxim Integrated
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR;
MAX6961ATH
MAX6961ATH by Maxim Integrated is a Graphics Display Driver with DOT MATRIX display mode and SERIAL data input. It operates at 2.7-3.6V, has 44 terminals in a square package, and supports multiplexed displays. Ideal for automotive applications due to its BICMOS technology and LED display driver interface IC type.
TLC5945RHBR
TLC5945RHBR by Texas Instruments is a graphics display driver with 16 segments, operating voltage range of 3-5.5V, and serial data input mode. It comes in a square chip carrier package style suitable for LED displays. With a max supply current of 60mA, it's ideal for industrial applications requiring high-quality graphics at temperatures ranging from -40 to 85°C.
LT3518IUF#PBF
Analog Devices
LT3518IUF#PBF by Analog Devices is a graphics display driver with a package body material of PLASTIC/EPOXY. It has a max supply voltage of 30V and operates in temperatures ranging from -40 to 125 °C. This LED display driver is commonly used in automotive applications.
TLC5917IDR
TLC5917IDR by Texas Instruments is a graphics display driver with 16 terminals, operating voltage range of 3-5.5 V, and constant-current output. It features serial data input mode for segment display applications in automotive industry, with small outline package style and peak reflow temperature of 260°C.
TPS54201DDCT
TPS54201DDCT by Texas Instruments is a LED display driver with 4 segments, operating at -40 to 125 °C. It has a supply voltage range of 4.5-28 V and comes in a small outline package suitable for automotive applications. The terminal finish is matte tin, with dual position terminals and gull wing form factor.
MAX16834AUP+T
PCA9551BS,118
PCA9551BS,118 by NXP Semiconductors is a SERIAL LED DISPLAY DRIVER with 16 terminals and 2.3-5.5 V supply voltage range. It operates in industrial temperature range (-40 to 85 °C) and is suitable for graphics display driver applications due to its compact square shape and surface mount capability.
CL220K4-G
Supertex
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-252; Package Shape: RECTANGULAR;
AL8843SP-13
Diodes Incorporated
AL8843SP-13 by Diodes Inc. is a LED display driver with 8 terminals and a supply voltage range of 4.5V to 40V. It operates in industrial temperatures from -40°C to 105°C, making it suitable for various graphics display applications requiring a compact rectangular package design.
LT3599EFE#TRPBF
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: HTSSOP; Package Shape: RECTANGULAR;
PCA9624PW
PCA9624PW by NXP Semiconductors is a SERIAL LED DISPLAY DRIVER with 24 terminals, operating voltage range of 2.3V to 5.5V, and max frequency of 1MHz. It is used in industrial applications for driving graphics display segments efficiently.
PCF8576CT/1,518
PCF8576CT/1,518 by NXP Semiconductors is a graphics display driver with 40 segments and CMOS technology. It operates at a voltage range of 1.8V to 5.5V, suitable for industrial applications with an operating temperature from -40°C to 85°C. This IC features a serial data input mode and is designed for liquid crystal displays in compact small outline packaging.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV7430D20R2G
Onsemi
NCV7430D20R2G by Onsemi is a graphics display driver with 14 terminals and power supplies ranging from 5.5V to 18V. It features a small outline package shape, matte tin terminal finish, and gull wing terminal form. This LED display driver is suitable for automotive applications due to its AEC-Q100 screening level and moisture sensitivity level of 2.
NCV7684DQR2G
NCV7684DQR2G by Onsemi is a LED display driver with 12 segments, operating at 5-18V. It features serial data input mode, open-drain output characteristics, and AEC-Q100 screening level. Ideal for graphics displays in automotive applications due to its small outline package style and wide temperature range of -40 to 150°C.
NCV78763DQ9R2G
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR;
NCV78702MW1AR2G
LED DISPLAY DRIVER; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30;
NCV78702MW0AR2G
LED DISPLAY DRIVER; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
NCV7693DB0R2G
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR;
NCV78703MW0R2G
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
NCV7683DQR2G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: HSSOP; Package Shape: RECTANGULAR; Screening Level: AEC-Q100;
NCV78247DQ0AR2G
LED DISPLAY DRIVER;
NCV78247DQ0R2G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR; Maximum Seated Height: 2.65 mm;
NCV78343DQ0R2G
LED DISPLAY DRIVER; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: NICKEL PALLADIUM GOLD; Peak Reflow Temperature (C): 260; JESD-609 Code: e4; Moisture Sensitivity Level (MSL): 3;
NCV78702DE0R2G
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: HTSSOP; Package Shape: RECTANGULAR;
NCV7692D10R2G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; No. of Segments: 24;
NCV78702MW0R2G
NCV7681LPWR2G
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: HSOP; Package Shape: RECTANGULAR;
NCV78663DQ0G
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: SSOP; Package Shape: RECTANGULAR;
NCV7694MW0R2G
LED DISPLAY DRIVER; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30;
NCV7430D20G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Finish: TIN;
NCV7681APWR2G
NCV7685DQR2G
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: HSSOP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved