Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV7462DQ0R2G by Onsemi is an AEC-Q100 compliant interface IC with a supply voltage range of 5V to 28V. It features a small outline package style, dual terminal position, and Gull Wing terminal form. Ideal for automotive applications requiring a temperature grade of -40 °C to 150°C.
Median Price
$2.202
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$2.080
1k+ parts
$1.860
10k+ parts
$1.750
Verical
$2.325
$2.188
Digiode
$2.194
Flip Electronics
Vyrian
Bristol Electronics
Corphita
$2.079
Corohmni
$2.180
Vigor
$2.220
AZTECH Wire
$17.350
SupplyDigital Components
Problanco Electronics
Authorized Procurement Solutions
Kulean Microsystems
TANS Electronics
Futuretech Components
UHIMA Technologies
This material provides good durability and protection for the IC, making it suitable for various applications.
Allows for easy and convenient installation on circuit boards, saving space and improving overall efficiency.
Can handle high voltage requirements, ensuring compatibility with a wide range of systems.
Meets automotive industry standards for reliability and performance, making it a reliable choice for automotive applications.
Provides excellent conductivity and corrosion resistance, ensuring reliable connections and longevity of the IC.
Other Function Interface ICs NCV7462DQ0R2G attributes and parameters. Explore more Other Function Interface ICs devices from Onsemi
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Screening Level:
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
NCV7462DQ0R2G Interface ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - 4Q2019 EOL 1/Apr/2020
PCN Design/Specification - Datasheet Update 12/Apr/2016
PCN Assembly/Origin - Wafer Fab Addition 06/Jun/2016
PCN Other - MSL Update 04/Sep/2015
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
Surge Components
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
DP83848IVVX/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
Transys Electronics
DS18B20Z+T&R
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
1552200253
Molex
WIRE AND CABLE;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
ATMEGA328P-AU
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
SI8631BD-B-ISR
Skyworks Solutions
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MAX253ESA+
Analog Devices
MAX253ESA+ by Analog Devices is an 8-terminal interface IC with a supply voltage range of 4.5V to 5.5V, operating temperature from -40°C to 85°C, and peak reflow temperature of 260°C. It is used in industrial applications requiring small outline packages for CMOS technology-based interface circuits.
CY8CMBR3108-LQXIT
CY8CMBR3108-LQXIT by Infineon operates at 1.8-5.5V with a temp range of -40 to 85°C. It's a CMOS interface IC with 16 terminals in a square package, suitable for industrial applications requiring precise touch sensing capabilities. The chip carrier design ensures a low profile and easy surface mounting, making it ideal for compact electronic devices.
ISO7741FDW
Texas Instruments
ISO7741FDW by Texas Instruments is a 16-terminal IC with 4 functions, operating b/w -55 to 125 °C. It features a supply voltage range of 2.25-5.5 V and uses CMOS technology. Ideal for military-grade applications requiring interface circuitry in compact spaces.
ADUM2400ARWZ-RL
ADUM2400ARWZ-RL by Analog Devices is a 16-terminal interface IC with supply voltage range of 2.7V to 5.5V, operating temperature from -40°C to 105°C. It features CMOS technology and GULL WING terminal form, suitable for industrial applications requiring small outline package style and surface mount compatibility.
P82B96TD/S900,118
NXP Semiconductors
P82B96TD/S900,118 by NXP Semiconductors is a BUS BUFFERS interface IC with 2 functions and operates b/w -40 to 125 °C. It has a supply voltage range of 2-15 V, making it suitable for automotive applications due to its small outline package style.
ISO7741BDW
ISO7741BDW by Texas Instruments is a digital isolator with 4 channels, CMOS technology, and EIA-232/EIA-485 interface standards. It operates b/w -55 to 125 °C with supply voltage range of 2.25V to 5.5V. Ideal for military-grade applications requiring small outline package and dual terminal position.
ADUM4166BRIZ
ADUM4166BRIZ by Analog Devices is a 20-terminal interface IC with CMOS technology. It operates b/w -55 to 125 °C, with supply voltage range of 3-3.6 V. This small outline package is ideal for applications requiring surface mount and dual terminal position configurations.
ADUM6402ARWZ-RL
ADUM6402ARWZ-RL by Analog Devices is a 16-terminal digital isolator with a supply voltage range of 3V to 5.5V, operating from -40°C to 105°C. It features a small outline package style and matte tin terminal finish, suitable for industrial applications requiring reliable signal isolation in compact designs.
DS3231MPMB1#
INTERFACE CIRCUIT; Terminal Form: UNSPECIFIED; No. of Terminals: 14; Package Shape: RECTANGULAR; Package Body Material: UNSPECIFIED; Terminal Position: UNSPECIFIED;
ISO7842FDWWR
ISO7842FDWWR by Texas Instruments is a digital isolator with 4 channels, operating at -55 to 125 °C. It has a supply voltage range of 2.25-5.5 V and comes in a small outline package style for military-grade applications. The IC features CMOS technology, dual terminal position, and nickel palladium gold finish on gull wing terminals.
MFRC52201HN1,151
MFRC52201HN1,151 by NXP Semiconductors is a surface mount interface IC with a square package and 32 terminals. It operates at a min supply voltage of 2.5V and max supply voltage of 3.6V. This IC is commonly used in applications requiring an interface circuit for communication purposes.
ISO7140FCCDBQR
ISO7140FCCDBQR by Texas Instruments is a 16-terminal IC with 4 functions, operating at -40 to 125 °C. It has a supply voltage range of 2.7-5 V and is ideal for automotive applications due to its small size, surface mount capability, and interface circuit functionality.
CY8CMBR3110-SX2I
CY8CMBR3110-SX2I by Infineon is a small outline interface IC with 16 terminals, operating at 1.8-5.5V and industrial temperature range (-40 to 85°C). It features CMOS technology, matte tin finish, and gull wing terminal form. Ideal for applications requiring an interface circuit in compact designs.
ISO7741DBQR
ISO7741DBQR by Texas Instruments is a 16-terminal interface IC with 4 functions. It operates b/w -55 to 125 °C and supports a supply voltage range of 2.25-5.5 V. Ideal for military-grade applications, it features CMOS technology and GULL WING terminals in a small outline package.
ADUM1200BRZ-RL7
ADUM1200BRZ-RL7 by Analog Devices is an 8-terminal IC with dual functions, operating b/w -40 to 105 °C. It has a supply voltage range of 2.7V to 5.5V and uses CMOS technology for industrial applications requiring interface circuitry in a small outline package.
ISO6721FBDR
ISO6721FBDR by Texas Instruments is a CMOS interface IC with 2 functions, operating at -40 to 125 °C. It has a supply voltage range of 1.71V to 5.5V and comes in a small outline package suitable for automotive applications. The IC features dual terminals with nickel palladium gold finish and is surface mountable, making it ideal for various electronic systems.
ISO7242CDW
ISO7242CDW by Texas Instruments is a digital isolator with 4 channels, operating at -40 to 125°C. It features a supply voltage range of 3.3V to 5V and comes in a small outline package suitable for automotive applications. The IC uses CMOS technology, has a moisture sensitivity level of 2, and offers dual-terminal position with nickel palladium gold finish.
ADUM4160BRWZ
ADUM4160BRWZ by Analog Devices is a small outline interface IC with 16 terminals and a max seated height of 2.65 mm. It has a temperature grade of industrial and uses CMOS technology. This IC is commonly used in various applications requiring an interface circuit for other functions.
MAX3869EHJ
MAX3869EHJ by Maxim Integrated is an Interface IC with 32 terminals, operating at -40 to 85 °C. It has a supply voltage range of 3.14-5.5 V and comes in a square-shaped package suitable for industrial applications requiring fine-pitch, surface-mount components.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV7240BDPR2G
NCV7240BDPR2G by Onsemi is a 24-terminal interface IC with a supply voltage of 3.3V, suitable for automotive applications due to AEC-Q100 screening. It features a small outline package style, gull wing terminal form, and nickel palladium gold finish, making it ideal for surface mount designs in compact spaces.
NCV7240DPR2G
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SSOP; Package Shape: RECTANGULAR; Maximum Seated Height: 1.75 mm;
NCV7240ADPR2G
NCV7240ADPR2G by Onsemi is a small outline, shrink pitch interface IC with 24 terminals. It operates at a supply voltage range of 4.5V to 5.5V and is AEC-Q100 compliant, making it suitable for automotive applications requiring high reliability and performance in harsh environments. With a terminal pitch of 0.65mm and gull wing terminal form, this IC is ideal for compact electronic systems where space-saving design is crucial.
NCV7462DQ1R2G
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR;
NCV7707DQR2G
NCV7707DQR2G by Onsemi is an automotive interface IC with a max supply voltage of 5.25V and built-in protections for over voltage, thermal, and under voltage. It has a small outline package style with a width of 7.5mm and is suitable for various automotive applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved