Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV57200DR2G by Onsemi is a MOSFET gate driver with 2 functions, AEC-Q100 screening level, and operating temperature range of -40 to 125°C. It is designed for automotive applications requiring a nominal voltage of 15V and max supply current of 3mA.
Median Price
$1.048
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Rochester
1+ parts
$0.802
100+ parts
$0.754
1k+ parts
$0.682
10k+ parts
-
Arrow
$1.015
$0.849
$0.705
Chip1Stop
$1.074
$0.879
$0.724
Newark
$1.560
$0.920
$0.825
$0.792
DigiKey
$1.590
$0.939
$0.842
Mouser Electronics
$0.934
$0.790
$0.751
Verical
$0.692
Farnell
$0.886
$0.699
RS (Exports)
$1.137
$0.963
Element14
$1.021
$0.783
$0.753
Digiode
$0.762
Flip Electronics
Chip Stock
Vyrian
Nova Conductors
Ampacity Inc.
$0.660
Semicontronic
$0.644
$0.640
Corphita
$0.722
Corohmni
$0.773
Component Stockers USA
$1.860
$1.300
$0.870
Vigor
$2.010
Microchip USA
$5.990
Aztec Data Supply Inc.
$9.480
Perfect Parts
Lixinc
Authorized Procurement Solutions
Kepictronics
SupplyDigital Components
Problanco Electronics
TANS Electronics
Argo Parts USA
Continental Prestige Electronics
$0.726
Bastille Electronics
Kulean Microsystems
UHIMA Technologies
The plastic/epoxy material provides durability and protection for the internal components of the gate driver, ensuring long-term reliability.
Being surface mountable allows for easy and efficient installation onto circuit boards, saving time and effort during assembly.
Having multiple functions in a single device reduces the need for additional components, simplifying the circuit design and potentially saving costs.
Compliance with AEC-Q100 standards ensures that the gate driver meets the rigorous automotive industry requirements for reliability and performance.
The high maximum operating temperature allows the gate driver to function effectively in a wide range of operating conditions, making it suitable for automotive applications.
The 15V nominal supply voltage ensures compatibility with a wide range of power sources, offering flexibility in system design.
MOSFET Gate Drivers NCV57200DR2G attributes and parameters. Explore more MOSFET Gate Drivers devices from Onsemi
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Screening Level:
Maximum Seated Height:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
NCV57200DR2G Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Process Change 11/Oct/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
SS14
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
L6385ED013TR
STMicroelectronics
L6385ED013TR by STMicroelectronics is a MOSFET gate driver with a max supply voltage of 17V and nominal output peak current limit of 0.65A. It features a small outline package style, suitable for high side driver applications in BCD technology. The device is designed for surface mount assembly with moisture sensitivity level 3.
LM5108DRCR
LM5108DRCR by Texas Instruments is a MOSFET gate driver with 2.6A output current, suitable for automotive applications. It operates b/w -40 to 125°C, with a supply voltage range of 5.5V to 16V. This small outline driver has dual terminals and supports high side driving.
TC4468CPD
Telcom Semiconductor
AND GATE BASED MOSFET DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
TC4427EOA713
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1ED020I12FTAXUMA2
Infineon Technologies
1ED020I12FTAXUMA2 by Infineon Technologies is a MOSFET Gate Driver with 20V max supply voltage, 5.5V min supply voltage, and 2us turn-on/off time. Ideal for automotive applications due to its small outline package style and high side driver feature.
LM5111-1MY/NOPB
National Semiconductor
MOSFET Drivers; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 12 V;
LM5050MKX-1
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR;
UCC21530BQDWKRQ1
UCC21530BQDWKRQ1 by Texas Instruments is a MOSFET gate driver with 2 channels, 6A output current, and 18V max supply voltage. Ideal for automotive applications due to AEC-Q100 screening level and high side driver feature. Package style is small outline, suitable for compact designs in harsh environments.
LMG1205YFXT
LMG1205YFXT by Texas Instruments is a MOSFET gate driver with 2 channels, 5A max output current, and 5.5V max supply voltage. Ideal for automotive applications due to its high side driver feature and -40 to 125°C operating temperature range. Package style: grid array, very thin profile, fine pitch.
TC4431COA
TC4431COA by Microchip Technology is a MOSFET gate driver with a max supply voltage of 30V and power supplies ranging from 4.5V to 30V. It features an inverted output polarity, Schmitt trigger input characteristics, and turn-on/off times of 0.17us, making it ideal for commercial applications requiring precise control over MOSFET switching operations.
MIC5011YM
MIC5011YM by Microchip Technology is a MOSFET Gate Driver with 8 terminals, operating b/w -40 to 85°C. It has a supply voltage range of 4.75-32V and features high side driver functionality. This industrial-grade CMOS technology IC is ideal for applications requiring fast turn-on/off times in compact designs.
LM5105SDX/NOPB
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE;
LTC7003IMSE#PBF
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: HTSSOP; Package Shape: RECTANGULAR;
A3941KLPTR-T
Allegro MicroSystems
Allegro MicroSystems' A3941KLPTR-T is a MOSFET gate driver with 28 terminals, suitable for automotive applications. It operates b/w -40 to 150°C, with a supply voltage range of 5.5-50V. This full bridge-based driver has a turn-on/off time of 0.15 us and nominal output peak current limit of 0.028A.
MCP1416T-E/OTVAO
MCP1416T-E/OTVAO by Microchip is a MOSFET Gate Driver with 18V max supply voltage, AEC-Q100 screening level, and -40 to 125°C operating temperature range. Ideal for automotive applications, it features a small outline package with Schmitt trigger input characteristics and 1.5A output peak current limit.
1EDI40I12AFXUMA1
1EDI40I12AFXUMA1 by Infineon Technologies is a MOSFET Gate Driver with 17V max supply voltage, 35V overvoltage protection, and 7.5A output current limit. Ideal for automotive applications due to its small outline package style and built-in protections against overcurrent and thermal issues.
LTC7000EMSE#PBF
Analog Devices
LTC7000EMSE#PBF by Analog Devices is a MOSFET gate driver with max supply voltage of 135V, min supply voltage of 3.5V, and turn-on/off time of 0.07us. It is used in high side driver applications requiring a compact design and operates b/w -40 to 125°C temperature range.
ZXGD3004E6TA
Zetex Plc
BUFFER OR INVERTER BASED MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
MIC4427YM-TR
Micrel
MIC4416YM4-TR
MIC4416YM4-TR by Microchip is a MOSFET Gate Driver with 18V max supply voltage, 1.2A output peak current limit, and 0.08us turn-on time. Ideal for industrial applications requiring true output polarity control in compact SOT-143 package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV5183DR2G
NCV5183DR2G by Onsemi is a MOSFET gate driver with a supply voltage range of 10-17V, AEC-Q100 screening level, and operating temperature from -40 to 125°C. It features an interface IC type of half bridge based driver and is ideal for automotive applications due to its high side driver capability and compact rectangular package style.
NCV57000DWR2G
NCV57000DWR2G by Onsemi is a MOSFET gate driver with 16 terminals, suitable for automotive applications. It operates at temperatures ranging from -40 to 125°C and has a max supply voltage of 24V. With turn-on/off times of 0.09 us, it features an interface IC type of BUFFER OR INVERTER BASED IGBT DRIVER.
NCV57080CDR2G
NCV57080CDR2G by Onsemi is a MOSFET gate driver with a max supply voltage of 30V and min operating temperature of -40°C. It features push-pull output characteristics and is designed for automotive applications, meeting AEC-Q100 screening standards. With a turn-on time of 0.085us, this driver offers high side driving capability in a small outline package style.
NCV5705BDR2G
NCV5705BDR2G by Onsemi is a MOSFET gate driver with a max supply voltage of 20V and high side driver feature. It has a turn-on time of 0.075us, making it suitable for automotive applications requiring fast switching speeds. This rectangular package with gull wing terminals operates in temperatures ranging from -40 to 125°C, meeting AEC-Q100 standards.
NCV51705MNTWG
NCV51705MNTWG by Onsemi is a MOSFET gate driver with a max supply voltage of 22V and AEC-Q100 screening. It operates in automotive applications, featuring a high side driver, turn-on/off time of 0.05us, and nominal output peak current limit of 6A.
NCV51563CADWR2G
HALF BRIDGE BASED MOSFET DRIVER;
NCV57090BDWR2G
BUFFER OR INVERTER BASED IGBT/MOSFET DRIVER; Moisture Sensitivity Level (MSL): 1;
NCV57080ADR2G
BUFFER OR INVERTER BASED IGBT DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCV51511PDR2G
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HSOP; Package Shape: RECTANGULAR;
NCV57001DWR2G
NCV57001DWR2G by Onsemi is a MOSFET gate driver with a max supply voltage of 24V, AEC-Q100 screening level, and operating temperature range of -40 to 125°C. It is designed for automotive applications, featuring a small outline package style and GATED input characteristics for efficient IGBT driving with turn-on/off times of 0.09 us.
NCV57001FDWR2G
BUFFER OR INVERTER BASED IGBT DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
NCV51561BBDWR2G
FULL BRIDGE BASED MOSFET DRIVER;
NCV51563BBDWR2G
NCV51563CBDWR2G
NCV51513ABMNTWG
NCV51561CADWR2G
NCV51563DADWR2G
NCV51563DBDWR2G
NCV5106BDR2G
HALF BRIDGE BASED IGBT/MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved