Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP781BMN050TAG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates in a temperature range from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. The package style is small outline with heat sink/slug, ideal for surface mount assembly with a terminal pitch of 0.65mm.
Median Price
$1.465
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.140
100+ parts
$0.659
1k+ parts
$0.592
10k+ parts
-
Chip1Stop
$1.790
$0.741
$0.492
$0.396
DigiKey
$1.890
$0.772
$0.550
$0.488
Verical
$0.525
$0.470
Flip Electronics
$0.270
Nova Conductors
$0.573
Digiode
$1.168
Vyrian
Chip Stock
Semicontronic
$0.306
$0.298
$0.297
Corohmni
$0.468
Argo Parts USA
$0.556
Continental Prestige Electronics
$0.561
Ampacity Inc.
$0.870
Corphita
$1.107
Microchip USA
$3.473
Aztec Data Supply Inc.
$6.630
Lixinc
Problanco Electronics
Infinite Electronics LLP (Excess)
Robosynatics
Lucentia Tech
$8.549
$8.374
Authorized Procurement Solutions
Kulean Microsystems
SupplyDigital Components
TANS Electronics
UHIMA Technologies
Futuretech Components
Netroflash
$0.544
$0.533
The use of plastic/epoxy material makes the product lightweight and durable.
The surface mount feature allows for easy and convenient installation on PCBs.
The high operating temperature range of up to 125°C ensures reliability in various environmental conditions.
CMOS technology offers low power consumption and high efficiency, making the product suitable for battery-powered applications.
The square package shape is space-efficient and allows for easy placement on the PCB.
The no-lead terminal form simplifies the assembly process and reduces the risk of solder joints.
The fixed adjustability ensures stable and precise output voltage, suitable for applications that require a constant voltage supply.
With a maximum output current of 0.1 A, this regulator can deliver sufficient power for low current applications.
Fixed Regulators - Positive Single Output Standard NCP781BMN050TAG attributes and parameters. Explore more Fixed Regulators - Positive Single Output Standard devices from Onsemi
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Regulator Type:
Maximum Seated Height:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
NCP781BMN050TAG Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - NCP781 02/Nov/2019
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
Semtech Electronics
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0805FR-0710RL
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AS7815ADTR-G1
Diodes Incorporated
Diodes Inc.'s AS7815ADTR-G1 is a fixed positive single output standard regulator with 15V nominal output voltage, 1A max output current, and 4% max voltage tolerance. It is ideal for applications requiring stable power supplies in a compact form factor.
LM340MP-5.0
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
BA78M09FP-E2
ROHM
ROHM's BA78M09FP-E2 is a fixed positive single output standard regulator with an output voltage of 9V and max current of 0.35A. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces. The surface-mount package style and small outline design further enhance its versatility in modern circuit designs.
L78L05ACZ-AP
STMicroelectronics
L78L05ACZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of 0 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
LM340AT-5.0
Texas Instruments
LM340AT-5.0 by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. With a package style of flange mount and through-hole terminal form, it offers reliable performance in diverse environments.
TS78L05CSRLG
TS78L05CSRLG by Taiwan Semiconductor is a fixed positive single output standard regulator with an operating temperature range of 0-125°C. It has a nominal output voltage of 5V, max voltage tolerance of 5%, and can handle a max output current of 0.1A. This component is commonly used in applications requiring stable voltage regulation in compact electronic devices.
MC78M05BDTRKG
MC78M05BDTRKG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various electronic applications requiring stable power supply. The surface-mount package style and small outline design enhance its versatility in compact devices.
L7824CT
L7824CT by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of 0-125°C. It has a nominal output voltage of 24V, max load regulation of 0.48%, and can handle a max output current of 1.5A. Ideal for applications requiring stable power supply in various electronic devices.
L78L12ABUTR
STMicroelectronics L78L12ABUTR is a fixed positive single output standard regulator with 12V nominal output voltage. It operates in temperatures ranging from -40 to 125°C, suitable for various applications. With a max output current of 0.07A and package style of small outline, it offers precise regulation in compact designs.
MC78L18ACPX
MC78L18ACPX by Fairchild Semiconductor is a fixed positive single output standard regulator with 18V nominal output voltage. It has a max load regulation of 0.17% and can handle an input voltage up to 33V, making it suitable for various electronic applications requiring stable power supply. Operating temperature ranges from 0°C to 125°C in a cylindrical package style.
MC78L24ACPRAG
MC78L24ACPRAG by Onsemi is a fixed positive single output standard regulator with a nominal output voltage of 24V. It has a max output current of 0.1A and operates within an input voltage range of 27-40V. This bipolar technology regulator is ideal for applications requiring stable power supply in various electronic devices.
MC78M15ACDTG
MC78M15ACDTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 15V and max current of 0.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
ZXTR2105FQ-7
ZXTR2105FQ-7 by Diodes Inc. is a fixed positive single output standard regulator with 5V nominal output voltage and 0.015A max output current. Operating temperature range from -40 to 150°C makes it suitable for automotive applications meeting AEC-Q100 standards. With a compact package style, it is ideal for space-constrained designs requiring precise voltage regulation.
MC78L05ACDR2
MC78L05ACDR2 by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It has a small outline package style, Gull Wing terminal form, and operates b/w 0-125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
MC7805CT
Vishay Semiconductors
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Output Voltage-1: 4.85 V; Qualification Status: Not Qualified;
ZR78L05C
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: WIRE; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 4 %;
TLV76650QWDRBRQ1
TLV76650QWDRBRQ1 by Texas Instruments is a fixed positive single output standard regulator with 5V nominal output voltage and 0.5A max output current. Operating temperature ranges from -40 to 150°C, making it suitable for automotive applications requiring high reliability in harsh environments. Package style is small outline with very thin profile, ideal for space-constrained designs.
LD39130SJ12R
LD39130SJ12R by STMicroelectronics is a fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a max output current of 0.3A and a nominal output voltage of 1.2V, making it suitable for applications requiring stable voltage regulation in compact electronic devices. With its small form factor and surface-mount capability, this regulator is ideal for space-constrained designs where precise power management is essential.
LM78M05CT
LM78M05CT by Texas Instruments is a fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a max output current of 0.5A, voltage tolerance of 5%, and dropout voltage of 1.8V. Ideal for applications requiring stable 5V power supply in various electronic devices.
LM340T-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Surface Mount: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP785AH33T1G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: LSOF; Terminal Form: FLAT; Maximum Input Voltage Absolute: 700 V; Maximum Voltage Tolerance: 5 %;
NCP781BMN033TAG
NCP781BMN033TAG by Onsemi is a CMOS technology fixed positive single output standard regulator with 3.3V nominal output voltage and 0.1A max output current. It operates in temperature range of -40 to 125 °C and has a package style of small outline, heat sink/slug. Ideal for applications requiring precise voltage regulation in compact spaces.
NCP785AH150T1G
NCP785AH150T1G by Onsemi is a fixed positive single output standard regulator with an operating temperature range of -40 to 85°C. It has a nominal output voltage of 15V, max voltage tolerance of 5%, and max load regulation of 0.15%. Ideal for applications requiring a compact, low-profile package with precise voltage regulation in electronic devices.
NCP785AH50T1G
NCP785AH50T1G by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.01A. It operates in temperatures ranging from -40 to 85°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The surface-mount package style and low profile design further enhance its versatility in electronic devices.
NCP785AH120T1G
NCP785AH120T1G by Onsemi is a fixed positive single output standard regulator with an operating temperature range of -40 to 85°C. It offers a nominal output voltage of 12V, max load regulation of 0.12%, and max input voltage of 450V. Ideal for applications requiring precise voltage regulation in compact spaces.
NCP7808TG
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; JESD-609 Code: e3; Surface Mount: NO;
NCP7805TG
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; No. of Functions: 1; Surface Mount: NO;
NCP7815TG
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Nominal Output Voltage-1: 15 V; Maximum Output Current-1: 1 A;
NCP781BMN150TAG
NCP781BMN150TAG by Onsemi is a fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 15V, max load regulation of 0.12%, and max input voltage of 150V. Ideal for applications requiring precise voltage regulation in compact spaces.
NCP7812TG
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Package Style (Meter): FLANGE MOUNT; Operating Temperature (TJ-Min): 0 Cel;
NCP785AST33T3G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 5 %; Surface Mount: YES;
NCP785AST50T3G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 5 %; Peak Reflow Temperature (C): NOT SPECIFIED;
NCP7812ETG
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 4 %; Maximum Output Voltage-1: 12.48 V; Minimum Output Voltage-1: 11.52 V;
NCP785BST120T3G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
NCP785BST150T3G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
NCP785BST33T3G
NCP7805ETG
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 4 %; Terminal Position: SINGLE; Maximum Output Voltage-1: 5.2 V;
NCP785AST120T3G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 5 %; Terminal Position: DUAL;
NCP785AST150T3G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 5 %; No. of Functions: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved