Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
STMicroelectronics L7805AC-D2TR is a fixed positive single output standard regulator with 5V nominal output voltage and 1A max output current. It operates b/w 0-150°C, suitable for various applications requiring stable voltage supply in compact designs. The package is surface mountable, making it ideal for space-constrained electronic devices.
Median Price
-
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
R&J Components
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Anansix
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Sea View Technologies
Bristol Electronics
Microfarads
Nova Conductors
IDEA Electronic Components Group
$2.021
$1.819
Corohmni
$2.343
Aztec Data Supply Inc.
$2.921
Microchip USA
$3.156
MKK Technologies
$3.801
DigiPath Technology Company
AZTECH Wire
$9.537
Semicontronic
$10.500
$10.238
$10.185
Ampacity Inc.
$17.500
Component Stockers USA
$99.990
Kepictronics
Vigor
Continental Prestige Electronics
Corphita
Argo Parts USA
Aranea Global
Parana Technologies
$2.417
The use of plastic/epoxy material makes this product lightweight and durable, ideal for electronic applications.
Allows for easy and efficient installation on circuit boards, saving time and space in electronic devices.
With a high maximum operating temperature, this regulator can withstand tough environmental conditions without overheating.
The bipolar technology used in this regulator ensures stable and reliable performance in various applications.
The rectangular shape of the package allows for efficient placement on PCBs, optimizing space utilization.
The gull wing terminal form provides secure connections and ease of soldering during installation.
Can operate effectively in low-temperature environments, making it suitable for a wide range of applications.
The TR packing method ensures secure and safe transportation of the product to prevent damage during shipping.
Provides a stable minimum output voltage, suitable for powering various electronic components efficiently.
This low voltage tolerance ensures consistent and accurate output voltage, critical for sensitive electronic devices.
The fixed 5V output voltage makes this regulator a reliable choice for powering standard electronic circuits.
With only two terminals, this regulator is easy to install and offers a simple solution for voltage regulation in a circuit.
The small outline package style saves space on PCBs, making it suitable for compact electronic designs.
The fixed output voltage eliminates the need for adjustment, providing a stable power supply for devices.
The 2.54mm terminal pitch allows for straightforward connections and compatibility with standard PCB layouts.
Offers minimal line regulation to ensure consistent output voltage, even with varying input voltage levels.
This specific regulator type offers a standard and reliable solution for voltage regulation in electronic devices.
The matte tin terminal finish provides excellent conductivity and corrosion resistance for long-term reliability.
The single terminal position simplifies installation and ensures a secure connection for stable performance.
The maximum output voltage of 5.2V is suitable for powering a wide range of electronic components with precision.
The low seated height allows for easy integration into electronic devices with limited space constraints.
The compact width makes this regulator suitable for use in small electronic devices or circuits.
The maximum load regulation ensures stable output voltage under varying load conditions, crucial for device performance.
With a minimum input voltage requirement of 7.5V, this regulator can efficiently regulate voltage for a variety of applications.
The 1A maximum output current capability makes this regulator suitable for powering multiple components in a circuit.
The nominal dropout voltage of 2V ensures efficient voltage regulation, even when the input voltage is close to the output voltage.
The compact length of 10mm allows for easy integration into electronic devices with limited space available.
Can handle a maximum input voltage of 25V, making it suitable for a wide range of electronic applications.
With an absolute maximum input voltage of 35V, this regulator offers added protection against voltage spikes and surges.
Fixed Regulators - Positive Single Output Standard L7805AC-D2TR attributes and parameters. Explore more Fixed Regulators - Positive Single Output Standard devices from STMicroelectronics
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
Width:
L7805AC-D2TR Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
UA78M05CDCY
Rochester Electronics
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
MC7812CT
Vishay Semiconductors
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Package Body Material: PLASTIC/EPOXY; Terminal Position: SINGLE; Maximum Input Voltage: 30 V;
R1524N050B-TR-KE
Nisshinbo Micro Devices
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 5; Package Code: LSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 50 V; Maximum Voltage Tolerance: 1.6 %;
LP3991TL-1.7/NOPB
LP3991TL-1.7/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 1.7V and max current of 0.3A. It operates in a temperature range from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
LM140H-5.0/883
LM140H-5.0/883 by Texas Instruments is a MIL-STD-883 compliant fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from -55 to 125 °C and is suitable for applications requiring stable voltage regulation in harsh environments.
MC7805ABD2TR4G
MC7805ABD2TR4G by Onsemi is a fixed positive single output standard regulator with 5V nominal output voltage and 1A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
TPS70928QDBVRQ1
TPS70928QDBVRQ1 by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 2.8V and max current of 0.15A. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications requiring stable power supply in compact spaces. With a small outline package style and surface mount capability, this CMOS technology-based regulator offers precise voltage regulation for various electronic systems.
LM7805MPX/NOPB
LM7805MPX/NOPB by Texas Instruments is a fixed positive single output standard regulator with a nominal output voltage of 5V and max output current of 1.5A. It operates in an input voltage range of 7.5V to 30V, making it ideal for various applications requiring stable power supply such as consumer electronics and industrial automation systems. The package style is small outline with gull wing terminals, suitable for surface mount assembly in compact designs.
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
MC7808ABD2TG
MC7808ABD2TG by Onsemi is a fixed positive single output standard regulator with an output voltage of 8V and max current of 1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
LM78L15ACZ/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
L7824ACV
L7824ACV by STMicroelectronics is a fixed positive single output standard regulator with a nominal output voltage of 24 V and max load regulation of 0.1%. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
MC78M05CDTRKG
MC78M05CDTRKG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces.
LP3990MF-3.3/NOPB
LP3990MF-3.3/NOPB by Texas Instruments is a CMOS technology fixed positive single output standard regulator with 5 terminals and 3.3V nominal output voltage. It has a max load regulation of 0.0246% and operates b/w -40 to 125 °C, making it ideal for applications requiring precise voltage regulation in compact spaces.
L78L12ABD
STMicroelectronics' L78L12ABD is a fixed positive single output standard regulator with an output voltage of 12V and max current of 0.1A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
BA178M24FP-E2
ROHM
ROHM's BA178M24FP-E2 is a fixed positive single output standard regulator with an output voltage of 24V and max current of 0.5A. It operates b/w -40 to 85°C, making it suitable for various applications requiring stable voltage regulation in a compact small outline package. The device features low line and load regulation, ideal for surface mount designs in electronic circuits.
UA78L05CDE4
UA78L05CDE4 by Texas Instruments is a fixed positive single output standard regulator with a nominal output voltage of 5V and max output current of 0.1A. It operates in an input voltage range of 7-20V, making it suitable for various applications requiring stable power supply such as consumer electronics and industrial equipment. With compact dimensions (4.9mm x 3.9mm x 1.75mm) and surface mount capability, it offers efficient regulation with low load and line regulation percentages (0.06% and 0.2% respectively).
MC78L12ABPG
MC78L12ABPG by Onsemi is a fixed positive single output standard regulator with a nominal output voltage of 12V and max load regulation of 0.1%. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
MC7809ACTG
MC7809ACTG by Onsemi is a fixed positive single output standard regulator with 1A max output current. It offers a nominal output voltage of 9V with a max load regulation of 0.025%. Ideal for applications requiring stable power supply in the temperature range of 0-125°C.
BA17805T
ROHM's BA17805T is a fixed positive single output standard regulator with 5V nominal output voltage and 1A max output current. It operates in temperatures ranging from -40 to 85°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
L7805CV
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
L7805ABD2T-TR
L7805ABD2T-TR by STMicroelectronics is a fixed positive single output standard regulator with 5V nominal output voltage, 1A max output current, and 2% max voltage tolerance. It is ideal for applications requiring stable power supply in a compact form factor, such as consumer electronics and industrial control systems.
L7805ACV
L7805ACV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and a max output current of 1A. It operates within a temperature range of 0 to 125°C and is commonly used in applications requiring stable voltage regulation, such as power supplies and electronic devices.
L7805CP
L7805CP by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates b/w 0-125°C, suitable for various applications requiring stable voltage regulation in electronic circuits. The package style is flange mount with through-hole terminals, making it easy to integrate into PCB designs.
L7805ABV
L7805ABV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, providing ease of installation and reliability in diverse environments.
L7805CV-DG
L7805CV-DG by STMicroelectronics is a fixed positive single output standard regulator with a nominal output voltage of 5V and max output current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. The package style is flange mount with through-hole terminals, providing ease of installation and reliability.
L7805ACD2T-TR
L7805ACD2T-TR by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable power supply. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
L7805CD2T-TR
L7805CD2T-TR by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable power supply. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
L7805CDT-TR
L7805CDT-TR by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates within a temperature range of 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With surface mount capability and small outline package style, it offers efficient power management solutions.
L7805ABV-DG
L7805ABV-DG by STMicroelectronics is a fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a max output current of 1.5A and can handle input voltages from 7.5V to 25V. This regulator is commonly used in applications that require a stable 5V power supply.
L7805ABP
STMicroelectronics L7805ABP is a BIPOLAR technology fixed positive single output standard regulator with 3 terminals. It has an output voltage of 5V, max current of 1A, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in electronic circuits.
L7809CV
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 4 %;
L7805ACP
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 2 %;
L7808CV
L7805ACV-DG
L7805ACV-DG by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. The package style is flange mount with through-hole terminals for easy installation.
L7805CT
STMicroelectronics L7805CT is a BIPOLAR technology fixed regulator with 3 PIN/PEG terminals. It has a nominal output voltage of 5V, max output current of 1.5A, and operates in temperatures ranging from 0 to 125°C. Ideal for applications requiring a reliable fixed positive single output standard regulator with precise voltage regulation.
L7805CD2T
L7805CD2T by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates within a temperature range of 0-150°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
L7806CV
L7806CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 6V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, providing ease of installation and reliability in diverse circuit designs.
L7805C-D2TR
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
L7809CV-DG
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved