Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Vishay Intertechnology's MC7812CT is a fixed positive single output standard regulator with 12 V nominal output voltage and 1 A max output current. It features a package style of flange mount, operating temperature range from 0 to 125 °C, and terminal form through-hole. Ideal for applications requiring stable voltage regulation in electronic circuits.
Median Price
$1.385
Lifecycle Status
Suppliers In-Stock
87
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Freelance Electronics
$0.287
Forefront Electronics and Design
$1.230
Component Electronics Inc.
$1.540
$1.150
$1.000
Ace Electronics
$2.000
American Microsemiconductor Inc.
$4.000
Chip Stock
American Connector Supply Corp
Lakeview Electronics
Vyrian
Bristol Electronics
$0.703
$0.487
Electronic Expediters
LWI Electronics Inc
Sinequanon
Pegasus Components GmbH
A&K Electronics
Rotakorn
R&J Components
Prism Electronics
Atlantic Semiconductor
Extreme Components
Semtec, LLC
LittleDiode
MISTER SPROCKETS
Martec Srl
Electronics Depot
Semi Source
DF Sales Co.
Microfarads
J & M Industries LLC
SPM Sales
Sea View Technologies
Lakeland Logistics Inc
A2Z Electronics, Inc.
Q Components
Classic Components Corporation
Zilex Electronics Inc.
GES GmbH
LIBRA Elektronik GmbH
EMSNET
Digiode
Inventory MP
Pride Electronics
ComSIT USA
PAR Electronics
Resion
Flex Direct, LLC
Sunrise Surplus Inc.
Kiltronic GmbH
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Cogito LLC
Tectiva GmbH
Sensible Micro Corp
Inland Empire Components Inc.
M&R Communications
Sogenti Electronics
Carlin Systems, Inc.
Florida Circuit
ECAB
Manoshevitz Elec. Sales
MRC Electronics
Ashlea Components Ltd
Odintec Ltd.
NAC Semi
QIE Inc.
Lantek
ComSIT Distribution GmbH
Nova Conductors
Component Sense
Speed Components Ltd
Fibra_Brandt Electronic GMBH
Mil-Aero Solutions, Inc.
Connector Distribution Corp
Right Parts Inc.
Whistler Technology
ABC Electronics Ltd.
Mentor Electronics Marketing, LLC
Velocity Electronics
Corel Iberica Componentes, S.L.
First Choice Components Inc.
Ack Elektronik San.Tic.Ltd.Sti
Digital Electronic Gebert Verwaltungs UG
Goldney Electronics S.L.
Diverse Electronics
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Corohmni
Ampacity Inc.
$3.500
Aztec Data Supply Inc.
$5.655
AZTECH Wire
$19.783
Semicontronic
$22.500
$21.938
$21.825
QUARKTWIN TECHNOLOGY LTD
Metaverse IC Inc.
Lixinc
Kulean Microsystems
A-Z Elektronik GmbH
Authorized Procurement Solutions
Problanco Electronics
Continental Prestige Electronics
TANS Electronics
Perfect Parts
Corphita
Supply Digital
Cyclops Electronics Ltd (Excess)
UHIMA Technologies
Argo Parts USA
Assy Fe
Advanced Electronics
Microchip USA
Kepictronics
SupplyDigital Components
ChipTracer
GreenTree Electronics
Bastille Electronics
Standard Data Resources (Excess)
Glotronic Ltd.
A-Plus Industry Inc.
PLASTIC/EPOXY material provides durability and reliability to the product, making it suitable for various environments.
The high maximum operating temperature ensures the regulator can function efficiently even in high-temperature conditions.
Bipolar technology offers stable and accurate voltage regulation for consistent performance.
Rectangular shape allows for easy integration and installation in different electronic devices or systems.
Stable output voltage of 12V provides a reliable power source for connected components.
With a maximum output current of 1A, the regulator can supply sufficient power for various applications.
Fixed Regulators - Positive Single Output Standard MC7812CT attributes and parameters. Explore more Fixed Regulators - Positive Single Output Standard devices from Vishay Intertechnology
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Maximum Line Regulation:
Maximum Load Regulation:
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification Status:
Regulator Type:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
MC7812CT Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-046-4552, 5962010464552, 5962-01-137-3685, 5962011373685, 5962-01-567-4379, 5962015674379, 5962-14-395-1386, 5962143951386, 5962-99-731-8565, 5962997318565
NIIN
010464552, 011373685, 015674379, 143951386, 997318565
Vishay Intertechnology, Inc. is a renowned American manufacturer of discrete semiconductors and passive electronic components that have been used in many consumer products and industrial applications worldwide. Founded by Polish-born businessman Felix Zandman in 1962, Vishay has grown to become one of the world's largest manufacturers of these components, with a strong presence in every major market around the globe. The company also offers value-added solutions such as its patented passive components, replacing a number of legacy parts with more reliable, cost effective solutions.
Executive Chairman of the Board, Chief Business Development Officer
Marc Zandman
Chief Executive Officer, President, and Director
Joel Smejkal
Executive Vice President and Chief Financial Officer
Lori Lipcaman
Itzehoe - Fab Phase 1
Fabrication
Fab Initiation
2025
Germany
Itzehoe
Wafer Capacity
US - Fab 3
1986
USA
Santa Clara
24,500
US - Fab 2
1972
8,000
Austria
1984
Vöcklabruck
25,000
Taiwan
1967
Hsintien
12,000
Italy - Fab 8
1961
Canada
Torino
15,000
Israel
2000
Yokneam Illit
400
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
CRCW080510K0FKEA
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
1552200168
Molex
WIRE AND CABLE;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
EU2B-YS3303C
Idec
ROTARY SWITCH;
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS3200T3G
Onsemi
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
L7808ACV
L7808ACV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 8V and max current of 1A. It operates within a temperature range of 0-125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. The package style is flange mount with through-hole terminals, providing ease of installation and reliability in diverse electronic designs.
MC78L12ACDG
MC78L12ACDG by Onsemi is a fixed positive single output standard regulator with 12V nominal output voltage, 0.1A max output current, and 4.16% max voltage tolerance. It is used in applications requiring stable power supply such as consumer electronics and industrial equipment.
MC78L05ABPG
MC78L05ABPG by Onsemi is a fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a max output current of 0.1A and a nominal output voltage of 5V. This regulator is commonly used in applications that require stable and regulated power supply, such as electronic devices and circuits.
LP3991TL-1.3/NOPB
LP3991TL-1.3/NOPB by Texas Instruments is a CMOS fixed positive single output standard regulator with an output voltage of 1.3V and max current of 0.3A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces like mobile devices and wearables.
S-1335C2J-A4T2U3
Seiko Instruments Usa
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: HVSSOF; Terminal Form: FLAT; Maximum Input Voltage: 5.5 V; Length: 1 mm;
5962-8778201UA
5962-8778201UA by Microchip Technology is a fixed positive single output standard regulator with an operating temperature range of -55 to 150°C. It has a max output current of 1.5A, voltage tolerance of 3%, and package body material made of glass. Ideal for applications requiring stable voltage regulation in harsh environments.
LM78L15ACZ/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
L78M15CDT-TR
L78M15CDT-TR by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 15V and max current of 0.5A. Operating temperature ranges from 0 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. This surface-mount device features a gull wing terminal form and matte tin finish, ideal for space-constrained designs that demand reliable power management solutions.
L7815CV
L7815CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 15V and max current of 1A. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. Its through-hole terminal form and rectangular package shape provide ease of installation and handling.
MC78M05BTG
MC78M05BTG by Onsemi is a fixed positive single output standard regulator with 5V nominal output voltage and 0.5A max output current. It has a dropout voltage of 2V, operating temperature range from -40 to 125 °C, and offers excellent line/load regulation for various applications requiring stable power supply.
LM78L05ACZXA
Rochester Electronics
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 4 %;
MC78L12ACPRAG
MC78L12ACPRAG by Onsemi is a fixed positive single output standard regulator with 12V nominal output voltage, 0.1A max output current, and 4.16% max voltage tolerance. It operates in temperatures ranging from 0 to 125°C and is ideal for applications requiring stable voltage regulation in electronic circuits.
MC78M15CDTG
MC78M15CDTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 15V and a max output current of 0.5A. It is commonly used in applications that require regulated power supply, such as electronic devices and industrial equipment.
LP5900SD-2.5/NOPB
LP5900SD-2.5/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 2.5V and max current of 0.15A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable power supply in compact spaces. The package style is small outline with very thin profile, ideal for surface mount designs where space is limited.
L78L12ACZ-TR
L78L12ACZ-TR by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with 12V nominal output voltage. It has a max load regulation of 0.1% and can handle up to 0.07A output current, making it ideal for applications requiring stable power supply in various electronic devices.
MC7815CD2TG
MC7815CD2TG by Onsemi is a fixed positive single output standard regulator with an output voltage of 15V and a max output current of 1A. It is commonly used in applications that require regulated power supply, such as electronic devices and industrial equipment.
UA78L09ACLPE3
UA78L09ACLPE3 by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 9V and max current of 0.1A. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a compact cylindrical package.
MC78L18ACP
Fairchild Semiconductor
TPS70933QDBVRQ1
TPS70933QDBVRQ1 by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 3.3V and max current of 0.15A. It operates in a temperature range from -40 to 125°C, making it suitable for automotive applications requiring stable power supply in compact spaces. The device features low load and line regulation, ideal for use in automotive electronics where precision and reliability are crucial.
MC78L05ACDG
MC78L05ACDG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
MC78L05ABDR2G
MC78L05ABDR2G by Onsemi is a fixed positive single output standard regulator with a nominal output voltage of 5V and max output current of 0.1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
MC78M05CDTRKG
MC78M05CDTRKG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces.
MC78L05ACDR2G
MC78L05ACDR2G by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
MC78M05CDTG
MC78M05CDTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces.
MC7805BDTRKG
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
MC78M05BDTRKG
MC78M05BDTRKG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various electronic applications requiring stable power supply. The surface-mount package style and small outline design enhance its versatility in compact devices.
MC7812CTG
MC7812CTG by Onsemi is a fixed positive single output standard regulator with 12V nominal output voltage and 1A max output current. It operates b/w 0-125°C, has a dropout voltage of 2V, and can handle input voltages up to 30V. Ideal for applications requiring stable power supply in various electronic devices.
MC7805CD2TR4G
MC7805CD2TR4G by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates b/w 0-125°C, suitable for various applications requiring stable voltage supply in compact spaces. The package style is small outline with gull wing terminals, making it ideal for surface mount designs.
MC7805CDTRKG
MC7805CDTRKG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
MC7805ACTG
MC7805ACTG by Onsemi is a BIPOLAR technology fixed regulator with 5V output voltage, 1A current, and 4% voltage tolerance. Ideal for applications requiring stable power supply in temperature range of 0-125°C such as consumer electronics and industrial equipment.
MC78M05ABDTG
MC78M05ABDTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces.
MC7805BDTG
MC7805BDTG by Onsemi is a fixed positive single output standard regulator with 1A max output current. It operates b/w -40 to 125°C, suitable for various applications requiring a stable 5V output voltage. The package is small outline with gull wing terminals, making it ideal for surface mount designs.
MC7815CTG
MC7815CTG by Onsemi is a BIPOLAR fixed positive single output standard regulator with 15V nominal output voltage. It has a max load regulation of 0.055% and can handle up to 1A output current. Ideal for applications requiring stable voltage supply in the temperature range of 0-125°C.
MC78M05CTG
MC78M05CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a through-hole package.
MC7805CDTG
MC7805CDTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates b/w 0-125°C, suitable for various applications requiring stable voltage regulation in compact spaces. The package is small outline with gull wing terminals, making it ideal for surface mount designs.
MC78M05BDTG
MC78M05BDTG by Onsemi is a fixed positive single output standard regulator with 5V nominal output voltage and 0.5A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
MC78L05ACPG
MC78L05ACPG by Onsemi is a fixed positive single output standard regulator with a nominal output voltage of 5V and max load regulation of 0.06%. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. The package style is cylindrical with through-hole terminals, providing ease of installation and reliability in different electronic devices.
MC7808CTG
MC7808CTG by Onsemi is a fixed positive single output standard regulator with 1A max output current. It offers an 8V nominal output voltage with a 5% voltage tolerance and operates in temperatures ranging from 0 to 125°C. Ideal for applications requiring stable voltage regulation in electronic circuits.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved