Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
L7815CD2T-TR by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 15V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
Median Price
$0.476
Lifecycle Status
Suppliers In-Stock
35
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.920
100+ parts
$0.544
1k+ parts
$0.458
10k+ parts
$0.445
Distrelec
$0.923
$0.451
-
DigiKey
$0.980
$0.557
$0.499
Avnet
EBV Elektronik
Chip1Stop
$0.340
$0.298
Arrow
$0.337
Verical
Farnell
$0.361
$0.354
Element14
$0.607
$0.558
Newark
$0.414
$0.342
Rochester
$0.537
$0.446
$0.398
RS (Exports)
$0.738
$0.664
Future Electronics
$0.380
$0.360
DF Sales Co.
$0.280
Digiode
$0.470
Nova Conductors
$0.512
Component Electronics Inc.
$0.770
$0.580
$0.500
TME
$0.810
$0.483
$0.420
$0.390
Cyclops Electronics Ltd
Chip Stock
Vyrian
IBS Electronics
$0.533
$0.309
Pegasus Components GmbH
Rutronik
$0.189
Anansix
Inventory MP
Bristol Electronics
Component Sense
LIBRA Elektronik GmbH
ComSIT Distribution GmbH
ComSIT USA
Prism Electronics
Sunrise Surplus Inc.
Semicontronic
$0.238
$0.232
$0.231
Ampacity Inc.
Corphita
Corohmni
$0.504
Advanced Electronics
$0.509
Argo Parts USA
$0.497
Netroflash
Vigor
$0.820
Component Stockers USA
$1.010
$0.410
$0.510
Benley Electronics
$1.750
IDEA Electronic Components Group
$5.162
$4.646
Aztec Data Supply Inc.
$6.320
MKK Technologies
$9.707
DigiPath Technology Company
Perfect Parts
Authorized Procurement Solutions
QUARKTWIN TECHNOLOGY LTD
Glotronic Ltd.
GreenTree Electronics
Eastek
Metaverse IC Inc.
Epart123
Robosynatics
Lucentia Tech
$0.494
$0.484
Lixinc
Futuretech Components
Continental Prestige Electronics
$0.432
$0.405
Infinite Electronics LLP (Excess)
A-Z Elektronik GmbH
Parana Technologies
$6.172
Kepictronics
Alle Elektronik GmbH
The use of plastic/epoxy material makes this regulator lightweight and durable, ideal for applications where weight and reliability are important.
Being surface mountable allows for easy and efficient PCB assembly, saving space and reducing manufacturing costs.
With a high maximum operating temperature, this regulator can withstand harsh environmental conditions and maintain stability.
The stable and precise output voltage of 15V ensures consistent performance in various electronic circuits and devices.
This regulator can deliver up to 1A of current, making it suitable for powering a wide range of components and devices with low to moderate power requirements.
With a high maximum input voltage of 28V, this regulator can safely handle input voltage fluctuations and protect downstream components from damage.
Fixed Regulators - Positive Single Output Standard L7815CD2T-TR attributes and parameters. Explore more Fixed Regulators - Positive Single Output Standard devices from STMicroelectronics
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
L7815CD2T-TR Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - HBIP40 Technology Junction Capacitor 5/Nov/2015 New Die Design 09/Sep/2019
PCN Packaging - Box Label Chg 28/Jul/2016 Mult Dev Inner Box Chg 9/Dec/2021
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
Lite-on Semiconductor
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
Allegro MicroSystems
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
Tesla Elektronicke Soucastky
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
Loras Industries
Transistor & Electronic
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
Taitron Components
Changzhou Galaxy Century Microelectronics
LM7812ACT
LM7812ACT by Onsemi is a fixed positive single output standard regulator with an output voltage of 12V and a max output current of 1A. It is commonly used in applications that require a stable power supply, such as electronic devices and industrial equipment.
MC7805CT-BP
Micro Commercial Components
MC7805CT-BP by Micro Commercial Components is a fixed positive single output standard regulator with 3 terminals. It operates b/w 0-125°C, providing a nominal output voltage of 5V with ±3% tolerance. Ideal for applications requiring a max output current of 1A and input voltage range of 7-25V.
UPC78N12H-AZ
Nec Electronics America
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SIP; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSIP-T3; Terminal Pitch: 2.3 mm;
UA78L05CDE4
Texas Instruments
UA78L05CDE4 by Texas Instruments is a fixed positive single output standard regulator with a nominal output voltage of 5V and max output current of 0.1A. It operates in an input voltage range of 7-20V, making it suitable for various applications requiring stable power supply such as consumer electronics and industrial equipment. With compact dimensions (4.9mm x 3.9mm x 1.75mm) and surface mount capability, it offers efficient regulation with low load and line regulation percentages (0.06% and 0.2% respectively).
MC7812BD2TR4G
MC7812BD2TR4G by Onsemi is a fixed positive single output standard regulator with an output voltage of 12V and max current of 1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and surface mount capability, this bipolar technology-based regulator is ideal for space-constrained electronic designs.
MC78L18ACPRE
MC78L18ACPRE by Onsemi is a fixed positive single output standard regulator with an output voltage of 18V and max current of 0.1A. It has a dropout voltage of 1.7V, making it suitable for applications requiring stable power supply in the range of 20.7-33V, with a max input voltage tolerance of 35V. The device operates within a temperature range of 0-125°C and comes in a cylindrical package with through-hole terminals for easy installation.
L7806CV
STMicroelectronics
L7806CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 6V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, providing ease of installation and reliability in diverse circuit designs.
XC6504A161MR-G
Torex Semiconductor
XC6504A161MR-G by Torex Semiconductor is a CMOS technology fixed positive single output standard regulator with 1.6V nominal output voltage and 0.15A max output current. It is a surface mount device in a small outline, low profile package suitable for applications requiring precise voltage regulation in compact spaces.
S-1335G17-A4T2U3
Seiko Instruments Usa
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: HVSSOF; Terminal Form: FLAT; Nominal Output Voltage-1: 1.7 V; Length: 1 mm;
L78S05CV-DG
L78S05CV-DG by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of 0-150°C. It has a nominal output voltage of 5V, max output current of 2A, and can handle input voltages from 7-25V. This regulator is ideal for applications requiring stable power supply in various electronic devices.
UA78L09ACLPR
UA78L09ACLPR by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 9V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a compact cylindrical package.
MC78M09CDTRKG
MC78M09CDTRKG by Onsemi is a fixed positive single output standard regulator with an output voltage of 9V and max current of 0.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces.
MC78L18ACPG
MC78L18ACPG by Onsemi is a fixed positive single output standard regulator with 18V nominal output voltage. It has a max load regulation of 0.17% and can handle up to 0.1A output current. Ideal for applications requiring stable voltage supply in the temperature range of 0-125°C.
MC78M05ACTG
MC78M05ACTG by Onsemi is a fixed positive single output standard regulator with 5V nominal output voltage and 0.5A max output current. It has a dropout voltage of 2V, operating temperature range from 0 to 125°C, and offers excellent line/load regulation for various applications requiring stable power supply.
UA78M33CDCYR
The Texas Instruments UA78M33CDCYR is a fixed positive single output standard regulator with an output voltage of 3.3V and max current of 0.5A. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces. Its small outline package and surface mount capability enhance versatility in PCB designs.
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
TL780-15CKC
TL780-15CKC by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 15V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a through-hole package.
TPS70933QDRVRQ1
TPS70933QDRVRQ1 by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 3.3V and max current of 0.15A. Operating temperature ranges from -40 to 125°C, making it suitable for automotive applications requiring stable power supply in harsh environments. Its small outline package with no lead terminals and very thin profile enhances space efficiency in compact designs.
UA7812CKCS
UA7812CKCS by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 12V and max current of 1.5A. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a compact package. Its through-hole terminal form and matte tin finish ensure easy installation and reliable performance in diverse environments.
MAQ5283-5.0YME-VAO
Microchip Technology's MAQ5283-5.0YME-VAO is a fixed positive single output LDO regulator with 8 terminals and 1.27mm terminal pitch. It operates b/w -40 to 125°C, has a nominal output voltage of 5V, and can handle up to 0.15A output current. Ideal for applications requiring precise voltage regulation in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
L7812CV
L7812CV by STMicroelectronics is a fixed positive single output standard regulator with a nominal output voltage of 12V and max output current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. The package style is flange mount with a through-hole terminal form, providing ease of installation and reliability in diverse electronic designs.
L7815CV
L7815CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 15V and max current of 1A. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. Its through-hole terminal form and rectangular package shape provide ease of installation and handling.
L7812CV-DG
L7812CV-DG by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 12V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. The package style is flange mount with through-hole terminals for easy installation.
L7812ACV
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 2 %;
L7815CV-DG
L7815CV-DG by STMicroelectronics is a fixed positive single output standard regulator with an operating temperature range of 0 to 125°C. It has a max output current of 1A and can handle input voltages up to 35V, making it suitable for various applications requiring stable voltage regulation.
L7812CD2T-TR
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 4 %;
L7812CT
L7812CT by STMicroelectronics is a fixed positive single output standard regulator with a nominal output voltage of 12V and a max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C and is commonly used in applications requiring stable power supply.
L7812ABD2T-TR
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 2 %;
L7812ACD2T-TR
L7812ACD2T-TR by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 12V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in a compact package. The device features gull wing terminals and offers high line and load regulation with low dropout voltage for efficient power management.
L7812ABV-DG
L7818CV
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 4 %;
L7815ABD2T-TR
L7812ABV
STMicroelectronics L7812ABV is a fixed positive single output standard regulator with 12 V nominal output voltage and 1 A max output current. It operates in temperatures ranging from -40 to 125 °C and has a max input voltage of 35 V. Ideal for applications requiring stable voltage regulation in electronic circuits.
L7815ABV-DG
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 4 %; Package Body Material: UNSPECIFIED; Surface Mount: NO;
L7815ABV
L7815ACD2T-TR
L7815ACV-DG
L7815ACV-DG by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 15V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation such as power supplies and industrial control systems. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
L7815ACV
L7812CP
L7812CP by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 12V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. The package style is flange mount with through-hole terminals, providing ease of installation and reliability.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved