Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP785AH120T1G by Onsemi is a fixed positive single output standard regulator with an operating temperature range of -40 to 85°C. It offers a nominal output voltage of 12V, max load regulation of 0.12%, and max input voltage of 450V. Ideal for applications requiring precise voltage regulation in compact spaces.
Median Price
$1.040
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.595
1k+ parts
$0.533
10k+ parts
-
DigiKey
$0.594
$0.518
Newark
$0.534
Chip1Stop
$1.360
Element14
$1.470
$0.782
$0.711
$0.686
Farnell
$0.497
$0.423
$0.417
Rochester
$0.575
$0.477
$0.426
Verical
$0.597
$0.532
Digiode
$0.447
Nova Conductors
$0.539
Flip Electronics
NAC Semi
$0.615
Chip Stock
IBS Electronics
$0.569
$0.542
$0.513
Vyrian
Freddi Giovanni
Corohmni
$0.412
Corphita
$0.424
Component Stockers USA
$0.490
$0.460
$0.410
Argo Parts USA
$0.523
Semicontronic
$0.750
$0.731
$0.728
Ampacity Inc.
$0.760
Vigor
$0.890
Aztec Data Supply Inc.
$5.430
RC Electronics
$0.550
$0.500
Perfect Parts
Lixinc
Problanco Electronics
SupplyDigital Components
ChipstoGo Electronic ltd
Kepictronics
Continental Prestige Electronics
$0.470
$0.350
Kulean Microsystems
QUARKTWIN TECHNOLOGY LTD
TANS Electronics
Metaverse IC Inc.
UHIMA Technologies
The use of plastic/epoxy as the package body material makes the product lightweight and durable, suitable for a variety of applications.
Being surface mountable allows for easy and efficient installation on printed circuit boards, saving space and enabling automated assembly processes.
With a high maximum operating temperature of 85°C, this regulator can withstand elevated temperatures and operate reliably in demanding environments.
The CMOS technology used in this regulator offers low power consumption and high noise immunity, ensuring efficient and stable operation.
The nominal output voltage of 12V makes this regulator suitable for a wide range of electronic devices and applications that require a stable power supply.
With a maximum output current of 0.01A, this regulator is ideal for low power applications where precise voltage regulation is needed.
Fixed Regulators - Positive Single Output Standard NCP785AH120T1G attributes and parameters. Explore more Fixed Regulators - Positive Single Output Standard devices from Onsemi
Adjustability:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Regulator Type:
Maximum Seated Height:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
NCP785AH120T1G Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Dev 24/Nov/2022
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Taitron Components
Surge Components
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
Digitron Semiconductors
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MC78M15ABTG
Onsemi
MC78M15ABTG by Onsemi is a fixed positive single output standard regulator with 15V nominal output voltage and 0.5A max output current. It operates in temperatures ranging from -40 to 125 °C and has a package style of flange mount. Ideal for applications requiring stable voltage regulation in electronic circuits.
UA78L15ACDR
UA78L15ACDR by Texas Instruments is a fixed positive single output standard regulator with an operating temperature range of 0 to 125°C. It has a max output current of 0.1A and can handle input voltages up to 30V, making it suitable for various applications requiring stable voltage regulation in a compact package.
LM78L12ACZ/LFT3
LM78L12ACZ/LFT3 by Texas Instruments is a fixed positive single output standard regulator with an operating temperature range of 0 to 125°C. It has a nominal output voltage of 12V and can handle a max output current of 0.1A. This regulator is commonly used in applications that require stable and reliable power supply.
LM78L05AIMX/NOPB
LM78L05AIMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a max output current of 0.1A and a nominal output voltage of 5V. This regulator is commonly used in applications that require stable and regulated power supply, such as electronic devices and circuits.
MC78L05ACD
MC78L05ACD by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It has a small outline package style, Gull Wing terminal form, and operates b/w 0-125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
L7809CF
STMicroelectronics
L7809CF by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 9V and max current of 1.5A. It operates within a temperature range of 0-150°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. The package style is flange mount with through-hole terminals, providing ease of installation and reliability in diverse environments.
TPS70912QDBVRQ1
TPS70912QDBVRQ1 by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 1.2V and max current of 0.15A. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications requiring stable power supply in compact spaces. The package style is small outline, low profile, shrink pitch, ideal for surface mount assembly.
MC78M05BTG
MC78M05BTG by Onsemi is a fixed positive single output standard regulator with 5V nominal output voltage and 0.5A max output current. It has a dropout voltage of 2V, operating temperature range from -40 to 125 °C, and offers excellent line/load regulation for various applications requiring stable power supply.
1778
Nte Electronics
The Nte Electronics 1778 is a fixed positive single output standard regulator with a nominal output voltage of 135V and max input voltage of 200V. It features a package body material made of plastic/epoxy, through-hole terminal form, and flange mount package style. Ideal for applications requiring precise voltage regulation in electronic circuits.
ZSR500GTA
ZSR500GTA by Diodes Inc. is a fixed positive single output standard regulator with an operating temperature range of -55 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.025%, and max output current of 0.1A. Ideal for applications requiring stable voltage regulation in compact spaces.
MC7812CT
Vishay Intertechnology
Vishay Intertechnology's MC7812CT is a fixed positive single output standard regulator with 12 V nominal output voltage and 1 A max output current. It features a package style of flange mount, operating temperature range from 0 to 125 °C, and terminal form through-hole. Ideal for applications requiring stable voltage regulation in electronic circuits.
L7812ABV-DG
L7812ABV-DG by STMicroelectronics is a fixed positive single output standard regulator with a nominal output voltage of 12 V and max load regulation of 0.1%. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage outputs up to 1 A. The package style is flange mount with through-hole terminals for easy installation.
L7806CV-DG
STMicroelectronics L7806CV-DG is a fixed positive single output standard regulator with 1A max output current. It offers a nominal output voltage of 6V, max input voltage of 19V, and operating temperature range from 0 to 125°C. Ideal for applications requiring stable voltage regulation in electronic circuits.
Vishay Semiconductors
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Package Body Material: PLASTIC/EPOXY; Terminal Position: SINGLE; Maximum Input Voltage: 30 V;
UA7812CKTTR
UA7812CKTTR by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 12V and max current of 1.5A. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a compact small outline package. With surface mount capability and high voltage tolerance of 38V, it is ideal for use in power supply circuits where precise voltage control is essential.
L7805ACV
L7805ACV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and a max output current of 1A. It operates within a temperature range of 0 to 125°C and is commonly used in applications requiring stable voltage regulation, such as power supplies and electronic devices.
MC7805BTG
MC7805BTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation. The device comes in a through-hole package style with matte tin terminal finish.
L7808CD2T-TR
L7808CD2T-TR by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 8V and a max output current of 1A. It is commonly used in applications that require stable power supply, such as electronic devices and industrial equipment.
MC78M05BDTRKG
MC78M05BDTRKG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various electronic applications requiring stable power supply. The surface-mount package style and small outline design enhance its versatility in compact devices.
L78L15ACD13TR
STMicroelectronics' L78L15ACD13TR is a fixed positive single output standard regulator with an output voltage of 15V and max current of 0.07A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP785AH33T1G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: LSOF; Terminal Form: FLAT; Maximum Input Voltage Absolute: 700 V; Maximum Voltage Tolerance: 5 %;
NCP781BMN033TAG
NCP781BMN033TAG by Onsemi is a CMOS technology fixed positive single output standard regulator with 3.3V nominal output voltage and 0.1A max output current. It operates in temperature range of -40 to 125 °C and has a package style of small outline, heat sink/slug. Ideal for applications requiring precise voltage regulation in compact spaces.
NCP785AH150T1G
NCP785AH150T1G by Onsemi is a fixed positive single output standard regulator with an operating temperature range of -40 to 85°C. It has a nominal output voltage of 15V, max voltage tolerance of 5%, and max load regulation of 0.15%. Ideal for applications requiring a compact, low-profile package with precise voltage regulation in electronic devices.
NCP785AH50T1G
NCP785AH50T1G by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.01A. It operates in temperatures ranging from -40 to 85°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The surface-mount package style and low profile design further enhance its versatility in electronic devices.
NCP781BMN050TAG
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 6; Package Code: HSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 150 V; Maximum Voltage Tolerance: 3 %;
NCP7808TG
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; JESD-609 Code: e3; Surface Mount: NO;
NCP7805TG
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; No. of Functions: 1; Surface Mount: NO;
NCP7815TG
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Nominal Output Voltage-1: 15 V; Maximum Output Current-1: 1 A;
NCP781BMN150TAG
NCP781BMN150TAG by Onsemi is a fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 15V, max load regulation of 0.12%, and max input voltage of 150V. Ideal for applications requiring precise voltage regulation in compact spaces.
NCP7812TG
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Package Style (Meter): FLANGE MOUNT; Operating Temperature (TJ-Min): 0 Cel;
NCP785AST33T3G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 5 %; Surface Mount: YES;
NCP785AST50T3G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 5 %; Peak Reflow Temperature (C): NOT SPECIFIED;
NCP7812ETG
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 4 %; Maximum Output Voltage-1: 12.48 V; Minimum Output Voltage-1: 11.52 V;
NCP785BST120T3G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
NCP785BST150T3G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
NCP785BST33T3G
NCP7805ETG
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 4 %; Terminal Position: SINGLE; Maximum Output Voltage-1: 5.2 V;
NCP785AST120T3G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 5 %; Terminal Position: DUAL;
NCP785AST150T3G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 5 %; No. of Functions: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved