Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP693DMN33TCG by Onsemi is a CMOS LDO regulator with 3.3V output voltage, 0.65V dropout, and 0.3A output current. Ideal for applications requiring stable power supply in compact spaces due to its small outline package style and low seated height of 0.6mm. Suitable for various electronic devices operating within the temperature range of -40°C to 150°C.
Median Price
$0.700
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$0.581
10k+ parts
$0.518
Farnell
$0.564
Verical
$0.727
$0.648
Digiode
$0.545
Nova Conductors
$0.637
Bristol Electronics
Dan-Mar Components
Vyrian
Ampacity Inc.
$0.479
Corphita
$0.517
Corohmni
Argo Parts USA
$0.618
AZTECH Wire
$19.890
Kulean Microsystems
Continental Prestige Electronics
$0.415
TANS Electronics
Problanco Electronics
SupplyDigital Components
Microchip USA
UHIMA Technologies
PLASTIC/EPOXY material provides durability and protection for the regulator, making it suitable for various applications.
Low dropout voltage ensures efficient regulation and minimizes power dissipation, making the regulator energy-efficient.
Surface mount feature allows for easy and convenient mounting on circuit boards, saving space and simplifying assembly.
Wide operating temperature range of up to 150°C ensures reliable performance in different environmental conditions.
CMOS technology offers low power consumption and high noise immunity, making the regulator suitable for battery-powered devices.
No-lead terminal form simplifies assembly and improves reliability by eliminating potential solder joint failures.
Precise minimum output voltage ensures stable and accurate voltage regulation for sensitive electronic components.
Narrow voltage tolerance ensures precise regulation, minimizing the risk of damage to connected devices due to voltage fluctuations.
Standard output voltage of 3.3V makes the regulator compatible with a wide range of electronic devices and circuits.
Sufficient number of terminals allow for easy connection to external components and ensure proper operation of the regulator.
Small outline, heat sink/slug, and very thin profile design make the regulator suitable for space-constrained applications while ensuring efficient heat dissipation.
Narrow terminal pitch enables high-density mounting on circuit boards, saving space and optimizing PCB layout.
Fixed positive single output LDO regulator provides stable voltage regulation and low dropout voltage for reliable performance in various electronic devices.
Tin terminal finish ensures good solderability and long-term reliability of the regulator connections.
Dual terminal position allows for flexible mounting options and ease of integration into different circuit layouts.
Precise maximum output voltage ensures accurate regulation and protection of connected devices from overvoltage conditions.
Low seated height facilitates compact designs and enables the regulator to be used in space-constrained applications.
Narrow width makes the regulator suitable for small form factor devices and applications where space is limited.
Low minimum input voltage requirement allows the regulator to operate efficiently even with low input voltage sources.
High output current capability of 0.3A ensures the regulator can power a variety of loads without overheating or voltage drop.
Compact length allows for easy integration into small electronic devices and reduces the overall footprint of the regulator on the PCB.
Wide input voltage range of up to 6.5V makes the regulator versatile and suitable for a variety of input power sources.
Fixed Regulators - Positive Single Output LDO NCP693DMN33TCG attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Onsemi
Maximum Dropout Voltage-1:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Operating Temperature (TJ-Max):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
Width:
NCP693DMN33TCG Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Devices EOL 26/Jul/2018
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Continental Device India
Changzhou Galaxy Century Microelectronics
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semitronics
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
Bytesonic Electronics
LD1117V50
STMicroelectronics
LD1117V50 by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 1.3A. It has a max dropout voltage of 1.2V, making it suitable for applications requiring stable voltage regulation in a compact form factor. With a package style of flange mount and through-hole terminal form, it offers reliable performance in various electronic devices.
LM2937ES-3.3/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 4.8 %;
ADP7118ACPZN-5.0-R7
Analog Devices
ADP7118ACPZN-5.0-R7 by Analog Devices is a fixed positive single output LDO regulator with a max output current of 0.2 A and a dropout voltage of 0.45 V. It is commonly used in applications requiring stable voltage regulation, such as power management in electronic devices.
MCP1804T-5002I/OT
Microchip Technology
MCP1804T-5002I/OT by Microchip is a fixed positive single output LDO regulator with 5V nominal output voltage, 0.15A max output current, and 1.3V max dropout voltage. It is ideal for applications requiring stable voltage regulation in a compact form factor with operating temperatures ranging from -40 to 125°C.
TPS7A6633QDGNRQ1
TPS7A6633QDGNRQ1 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.15A. It operates in temperatures ranging from -40 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in harsh environments. With a compact package style and excellent load regulation of 0.02%, this CMOS technology-based regulator is ideal for space-constrained designs that demand high performance and reliability.
LM1117IMPX-3.3
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;
NCP1117ST50T3G
NCP1117ST50T3G by Onsemi is a fixed positive single output LDO regulator with 1A max output current, 5V nominal output voltage, and 1.2V max dropout voltage. It is ideal for applications requiring stable voltage regulation in a compact small outline package.
LM1117MPX-3.3/NOPB
LT1764AEQ-2.5#TRPBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3.52 %;
REG1117-3.3TR
The Texas Instruments REG1117-3.3TR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.8A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. The package style is small outline with Gull Wing terminals, ideal for surface mount assembly in space-constrained designs.
LM3480IM3-12/NOPB
LM3480IM3-12/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 12V and max dropout voltage of 1.2V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With surface mount capability and small outline package style, it offers efficient performance in limited footprint designs.
LD1117DT33C
LD1117DT33C by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.8A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LP2951-50DRGR
LP2951-50DRGR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.6V, suitable for applications requiring stable voltage regulation. With a max output current of 0.1A and compact package style, it is ideal for space-constrained designs in various electronic devices. Operating efficiently within a wide temperature range from -40°C to 125°C, this regulator ensures reliable performance in diverse environments.
LM1085IS-3.3/NOPB
LM1085IS-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 3A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. With a small outline package style and surface mount capability, it offers precise regulation with low dropout voltage for efficient power management solutions.
LM2937IMP-5.0/NOPB
LM2937IMP-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.5A max output current. It operates b/w -40 to 85°C, has a dropout voltage of 1V, and offers excellent line/load regulation for various applications in electronics requiring stable power supply.
PTPS7A2033PDBVR
The Texas Instruments PTPS7A2033PDBVR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max dropout voltage of 0.14V, suitable for applications requiring stable power supply in a compact form factor. With a max output current of 0.3A and operating temperature range from -40°C to 125°C, it is ideal for use in various electronic devices where space and efficiency are crucial factors.
MIC5239-3.3YS
MIC5239-3.3YS by Microchip is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.5A. It has a small outline package style, matte tin terminal finish, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
MIC39100-5.0WS-TR
MIC39100-5.0WS-TR by Microchip is a Fixed Positive Single Output LDO Regulator with 1A max output current, 5V nominal output voltage, and 2% voltage tolerance. Ideal for applications requiring stable power supply in compact spaces due to its small outline package style and low dropout voltage of 0.41V at 1A load.
AP2114H-3.3TRG1
Bcd Semiconductor Manufacturing
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1.5 %; Maximum Dropout Voltage-1: .75 V;
AZ1117CH-5.0TRG1
Diodes Incorporated
Diodes Incorporated's AZ1117CH-5.0TRG1 is a fixed positive single output LDO regulator with a max output current of 0.8A and a nominal output voltage of 5V. It has a small outline package style, operates b/w -20°C to 125°C, and is suitable for applications requiring stable voltage regulation in compact electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP694D33HT1G
NCP694D33HT1G by Onsemi is a Fixed Positive Single Output LDO Regulator with 3.3V Nominal Output Voltage, 0.3A Max Output Current, and 85°C Max Operating Temperature. It is ideal for applications requiring stable voltage regulation in compact spaces due to its small outline package style and low dropout voltage of 0.1V.
NCP699SN18T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 3 %;
NCP698SQ33T1G
NCP698SQ33T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.08A. It has a small outline, thin profile package style and operates b/w -40 to 85°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
NCP606MN18T2G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 2 %;
NCP603SN330T1G
NCP603SN330T1G by Onsemi is a 3.3V fixed positive single output LDO regulator with 0.3A max output current, ideal for applications requiring stable voltage supply. It features a small outline package with matte tin finish and operates in temperatures ranging from -40 to 125°C. With a dropout voltage of 0.157V, it ensures efficient power delivery in compact designs.
NCP694H33HT1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSOF; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 2 %;
NCP698SQ30T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: TSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 3 %;
NCP662SQ30T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: TSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 4 %;
NCP698SQ35T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: TSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 2 %;
NCP694DSAN33T1G
NCP692MN33T2G
NCP692MN33T2G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A. It has a nominal output voltage of 3.3V and can operate in temperatures ranging from -40°C to 125°C. This regulator is commonly used in applications that require stable and regulated power supply, such as consumer electronics and automotive systems.
NCP699SN33T1G
NCP698SQ15T1G
NCP600SN330T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 2 %;
NCP603SN300T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 3 %;
NCP603SN350T1G
NCP600SN180T1G
NCP600SN350T1G
NCP603SN500T1G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved