Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LM1086ISX-1.8/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 1.5A and a nominal output voltage of 1.8V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With surface mount capability and small outline package style, it offers efficient performance in electronic devices with limited space constraints.
Median Price
$1.463
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$1.546
100+ parts
$1.277
1k+ parts
$0.690
10k+ parts
-
Mouser Electronics
$2.710
$1.660
$1.370
$1.350
Rochester
$1.240
$1.110
$1.050
Verical
$1.387
$1.313
DigiKey
Digiode
$0.910
Nova Conductors
$1.139
Bristol Electronics
$1.650
$1.023
Vyrian
Anansix
Microfarads
Ampacity Inc.
$0.810
Semicontronic
$0.790
$0.786
Corphita
$0.862
Aranea Global
$1.116
$1.072
Argo Parts USA
Continental Prestige Electronics
Parana Technologies
$6.013
$6.789
DigiPath Technology Company
$6.621
$6.091
IDEA Electronic Components Group
$6.756
$6.080
ChromeModa Solutions
$5.540
Corohmni
$7.152
Advanced Electronics
$9.673
$9.189
Lixinc
Authorized Procurement Solutions
Perfect Parts
GreenTree Electronics
Futuretech Components
This material provides durability and protection for the internal components, making it a reliable choice for various applications.
With a low dropout voltage, this regulator can maintain a stable output voltage even when the input voltage is close to the output voltage.
The surface mount capability allows for easy installation on PCBs, saving space and making it suitable for compact designs.
The wide operating temperature range ensures that the regulator can function effectively in various environments without overheating.
The bipolar technology used in this regulator offers high accuracy and low noise, making it ideal for precision applications.
The rectangular shape of the package allows for easy integration into existing circuit designs and layouts.
The gull wing terminal form provides secure connections and allows for easy soldering during assembly.
The low minimum operating temperature enables the regulator to work in cold environments without any issues.
The tape and reel packing method is convenient for automated assembly processes, making it suitable for high-volume production.
The minimum output voltage ensures compatibility with a wide range of downstream components and systems.
The low voltage tolerance ensures a precise output voltage, making it suitable for applications that require stable power supply.
The nominal output voltage provides a standard reference point for powering various electronic devices and components.
The three terminals offer flexibility in connecting the regulator to other circuit components, increasing the versatility of the product.
The small outline package style saves space on the PCB, making it suitable for applications with limited board space.
The fixed output voltage eliminates the need for external adjustments, simplifying the design and ensuring consistent performance.
With a high maximum operating temperature, the regulator can withstand elevated temperatures without compromising performance.
The standard terminal pitch simplifies PCB layout and connections, making it easy to integrate into existing designs.
The low line regulation ensures the output voltage remains stable even with fluctuations in the input voltage.
The low minimum operating temperature allows the regulator to function reliably in cold environments.
The fixed positive single output LDO regulator provides a stable voltage output, making it ideal for applications requiring precise power supply.
The matte tin terminal finish enhances solderability and ensures a reliable electrical connection.
The single terminal position simplifies installation and alignment on the PCB, reducing assembly time and effort.
The maximum output voltage ensures compatibility with devices that require a slightly higher voltage input.
The MSL 3 rating indicates that the regulator can withstand moderate exposure to moisture during storage and handling.
The low seated height allows for a compact design, making it suitable for applications with height restrictions.
The width dimension is compact, enabling easy integration into tight spaces or densely packed PCB layouts.
The low load regulation ensures that the output voltage remains stable under different load conditions, making it suitable for dynamic applications.
The minimum input voltage requirement ensures compatibility with a wide range of power sources, making it versatile for various applications.
The high output current capability allows the regulator to power multiple components or devices simultaneously without voltage drop.
The high peak reflow temperature ensures the regulator can withstand the soldering process during assembly without damage.
The nominal dropout voltage ensures efficient operation with minimal power loss, making it energy-efficient in powering devices.
The compact length dimension saves space on the PCB, making it ideal for applications with size constraints.
The high maximum input voltage rating provides flexibility in using diverse power sources without risk of damage.
The absolute maximum input voltage rating ensures protection against voltage spikes or fluctuations, enhancing the regulator's durability and reliability.
Fixed Regulators - Positive Single Output LDO LM1086ISX-1.8/NOPB attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Texas Instruments
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
LM1086ISX-1.8/NOPB Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
STM32H753IIT6
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
MC33269DT-3.3G
MC33269DT-3.3G by Onsemi is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.8A max output current. It has a small outline package style, operates b/w -40 to 150 °C, and offers low dropout voltage for efficient power management in various electronic applications.
LM3940IS-3.3/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 7.5 V; Maximum Voltage Tolerance: 5.2 %;
LP2950CDT-3.3
Motorola
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Dropout Voltage-1: .45 V; JESD-30 Code: R-PSSO-G2;
ADM7172ACPZ-1.3-R7
Analog Devices
ADM7172ACPZ-1.3-R7 by Analog Devices is a CMOS LDO regulator with 1.3V output voltage, 2A max output current, and 1% voltage tolerance. Ideal for applications requiring fixed positive single output regulators in compact spaces due to its small package size and low dropout voltage of 1V.
TPS71533DCKRM3
TPS71533DCKRM3 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 50mA. It has a small outline package style, surface mount capability, and operates within an extended temperature range from -40°C to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
AZ1117EH-3.3TRG1
Diodes Incorporated
Diodes Incorporated's AZ1117EH-3.3TRG1 is a fixed positive single output LDO regulator with 1A max output current, 3.3V nominal output voltage, and 1.3V max dropout voltage. It is ideal for applications requiring stable voltage regulation in compact spaces due to its small outline package style and low profile design.
AZ1117CR-3.3TRG1
Diodes Incorporated's AZ1117CR-3.3TRG1 is a fixed positive single output LDO regulator with an output voltage of 3.3V and max current of 0.8A. It operates within a temperature range of -20 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
LM2936MPX-3.3/NOPB
LM2936MPX-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.05A. It has a small outline package style, operates b/w -40 to 150°C, and offers low dropout voltage at 0.2V for efficient power management in various electronic applications.
LT1763CS8-1.8#TRPBF
Analog Devices' LT1763CS8-1.8#TRPBF is a fixed positive single output LDO regulator with a nominal output voltage of 1.8V and max output current of 0.5A, suitable for applications requiring low dropout voltage and precise voltage regulation in compact designs. Operating temperature ranges from -40 to 125°C, making it versatile for various electronic devices needing stable power supply. Package style is small outline with gull wing terminals, ideal for surface mount assembly in space-constrained PCB layouts.
LDL1117S50R
STMicroelectronics' LDL1117S50R is a fixed positive single output LDO regulator with a max output current of 1.2A and a dropout voltage of 0.6V. This surface-mount device, suitable for applications requiring stable 5V output voltage, operates in temperatures ranging from -40 to 125°C.
ADP3338AKCZ-3.3
ADP3338AKCZ-3.3 by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1A. It has a small outline package style, Gull Wing terminal form, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
LP2992AIM5-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 4.5 %;
LM1085IS-3.3/NOPB
LM1085IS-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 3A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. With a small outline package style and surface mount capability, it offers precise regulation with low dropout voltage for efficient power management solutions.
LP2985IM5X-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 4 %;
LT1963AEQ-1.5#PBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3.5 %;
LM2940CS-5.0/NOPB
LM2940CS-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 1A. It has a small outline package style, operates b/w 0°C to 125°C, and offers low dropout voltage for efficient power management in various electronic applications.
PTLV75533PDBVR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR;
MCP1703T-3002E/CB
Microchip Technology
MCP1703T-3002E/CB by Microchip is a fixed positive single output LDO regulator with 3V nominal output voltage, 0.25A max output current, and 2% max voltage tolerance. It is ideal for applications requiring stable power supply with low dropout voltage in automotive electronics, industrial controls, and consumer devices.
LM1117IMPX-3.3/NOPB
LM1117IMPX-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.8A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and surface mount capability, it offers precise regulation with low dropout voltage for efficient power management solutions.
AP2120N-3.3TRG1
Diodes Inc.'s AP2120N-3.3TRG1 is a CMOS technology-based LDO regulator with 3.3V output voltage, 0.1A max current, and 2% voltage tolerance. Ideal for applications requiring fixed positive single output regulators in compact spaces due to its small outline package style and low dropout voltage of 0.3V. Operating temperature range from -40°C to 85°C makes it suitable for various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
LM1086IS-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 27 V; Maximum Voltage Tolerance: 2 %;
LM1086IS-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and surface mount capability, it offers efficient performance with low dropout voltage for reliable power management solutions.
LM1086ILD-3.3/NOPB
LM1086ILD-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 1.5A and a nominal output voltage of 3.3V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With its small outline package style and surface mount capability, this regulator is ideal for space-constrained electronic devices where precise voltage control is essential.
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 27 V; Maximum Voltage Tolerance: 2 %;
LM1085IS-12/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 18 V; Maximum Voltage Tolerance: 2 %;
LM1086CS-3.3/NOPB
LM1086CS-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 1.5A and a nominal output voltage of 3.3V. It operates in an input voltage range from 4.5V to 29V, making it suitable for various applications requiring stable voltage regulation in compact designs at temperatures ranging from 0°C to 125°C.
LM1085ISX-3.3/NOPB
LM1085ISX-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 3A and a nominal output voltage of 3.3V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With surface mount capability and small outline packaging, it is ideal for space-constrained electronic devices.
LM1086ISX-3.3/NOPB
LM1086ISX-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 1.5A and dropout voltage of 1.3V, ideal for applications requiring stable voltage regulation in a compact package. Operating temperature ranges from -40°C to 125°C, making it suitable for various electronic devices needing reliable power supply solutions. With surface mount capability and small outline package style, it offers flexibility in design while ensuring efficient performance with low line and load regulations.
LM1084ISX-3.3/NOPB
LM1086CSX-3.3/NOPB
LM1086CSX-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. The package style is small outline, with gull wing terminals for surface mounting ease.
LM1086ISX-1.8/NOPB
LM1086ISX-1.8
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved