Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP693DMN10TCG by Onsemi is a Fixed Positive Single Output LDO Regulator with 1V Nominal Output Voltage, 0.3A Max Output Current, and 1.45V Max Dropout Voltage. It is ideal for applications requiring low power consumption in compact designs due to its small outline package style and CMOS technology.
Median Price
$0.796
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$2.240
100+ parts
$0.965
1k+ parts
$0.835
10k+ parts
-
Rochester
$0.696
$0.578
$0.515
DigiKey
$0.870
Verical
$0.722
$0.644
Digiode
$0.545
Chip Stock
Vyrian
Corphita
$0.517
Corohmni
$0.564
AZTECH Wire
$18.890
Perfect Parts
Continental Prestige Electronics
$0.487
TANS Electronics
SupplyDigital Components
Authorized Procurement Solutions
Kulean Microsystems
Problanco Electronics
UHIMA Technologies
Microchip USA
The plastic/epoxy material makes the package lightweight and durable, suitable for various applications.
With a low dropout voltage, this regulator can maintain a stable output even when the input voltage is close to the output voltage.
Being surface mountable allows for easy and efficient PCB assembly, saving space and reducing overall product size.
This regulator can operate efficiently within a wide temperature range, making it suitable for various environmental conditions.
The CMOS technology used in this regulator ensures low power consumption and high efficiency, making it ideal for battery-powered devices.
The minimum output voltage of 0.96V allows for a wide range of output voltage options, providing flexibility in application design.
With a voltage tolerance of 4%, this regulator provides a stable output voltage, ensuring consistent performance.
The nominal output voltage of 1V makes this regulator suitable for applications requiring a fixed low voltage output.
Having 6 terminals allows for easy connectivity and integration into the circuit, simplifying the design process.
The small outline, heat sink/slug, and thin profile package style ensure efficient heat dissipation and space-saving design.
The small terminal pitch of 0.5mm enables high-density mounting, making it suitable for compact designs with limited space.
This regulator type provides a stable and regulated output voltage, essential for sensitive electronic components.
The tin terminal finish ensures good solderability and electrical conductivity, enhancing the overall performance of the regulator.
Having dual terminal positions allows for flexibility in PCB layout and orientation, accommodating different design requirements.
The maximum output voltage of 1.027V ensures that the output remains within the specified limits, providing a reliable performance.
The low seated height of 0.6mm contributes to a compact and slim design, ideal for applications with space constraints.
The narrow width of 1.8mm allows for a space-efficient layout on the PCB, enabling compact and streamlined product designs.
The minimum input voltage of 1.6V ensures reliable operation even with low input voltages, providing flexibility in power supply options.
With a maximum output current of 0.3A, this regulator can deliver sufficient power for a range of low-power applications.
The compact length of 2mm contributes to the overall small footprint of the regulator, making it suitable for space-constrained designs.
The maximum input voltage of 6.5V ensures compatibility with a wide range of power sources, making it versatile for different applications.
Fixed Regulators - Positive Single Output LDO NCP693DMN10TCG attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Onsemi
Maximum Dropout Voltage-1:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Operating Temperature (TJ-Max):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
Width:
NCP693DMN10TCG Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Devices EOL 26/Jul/2018
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
Taiwan Semiconductor
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MBRS340T3G
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
General Semiconductor
International Semiconductor
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
Continental Device India
NCP1117DT50RKG
NCP1117DT50RKG by Onsemi is a fixed positive single output LDO regulator with 1A max output current, 5V nominal output voltage, and 2% max voltage tolerance. It is ideal for applications requiring stable voltage regulation in a compact package, such as consumer electronics and industrial control systems.
LT1117CST-3.3#PBF
Analog Devices
Analog Devices' LT1117CST-3.3#PBF is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max dropout voltage of 1.2V, suitable for applications requiring stable power supply in compact spaces. Operating temperature ranges from 0 to 125°C, making it ideal for various electronic devices needing efficient regulation with low dropout voltage. This surface-mount device features a small outline package style and matte tin terminal finish, ensuring reliable performance in limited space environments.
LT1963AEQ-2.5#PBF
LT1963AEQ-2.5#PBF by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 2.5V and max output current of 1.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
TPS7A1633QDGNRQ1
Texas Instruments
TPS7A1633QDGNRQ1 by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.5V max dropout voltage, and 0.1A max output current. It is ideal for applications requiring stable voltage regulation in automotive electronics, offering AEC-Q100 screening and operating temperature range of -40 to 125°C.
TPS76333DBVTG4
TPS76333DBVTG4 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.15A. It has a small outline, low profile package style and operates in temperatures ranging from -40°C to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
AP2210K-3.3TRG1
Diodes Incorporated
Diodes Inc. AP2210K-3.3TRG1 is a 3.3V fixed positive single output LDO regulator with max dropout voltage of 0.5V and max output current of 0.3A, suitable for applications requiring stable voltage supply in compact spaces like consumer electronics and IoT devices.
LD39050PU33R
STMicroelectronics
LD39050PU33R by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 0.5 A. It has a nominal output voltage of 3.3 V and can operate in temperatures ranging from -40°C to 125°C. This regulator is commonly used in applications that require stable and regulated power supply, such as consumer electronics and industrial equipment.
LT1129IST-3.3#PBF
LT1129IST-3.3#PBF by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.7A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
XC6220B331MR-G
Torex Semiconductor
XC6220B331MR-G by Torex Semiconductor is a 3.3V fixed positive single output LDO regulator with a max output current of 1A. Operating at an input voltage range of 1.6-6V, it features a low dropout voltage of 0.06V and load regulation of 0.045%. Ideal for applications requiring stable voltage supply in compact spaces due to its small outline package style and surface mount capability.
LD1117S33TR
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
LF33CV
LF33CV by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 0.5A and a nominal output voltage of 3.3V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. With a compact rectangular package style and through-hole terminal form, it offers reliable performance in a wide range of environments.
MIC2920A-3.3WS-TR
Micrel
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 2.5 %;
LT1763CS8-3.3#PBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2.4 %;
LP3985IM5-3.3/NOPB
LP3985IM5-3.3/NOPB by Texas Instruments is a Fixed Positive Single Output LDO Regulator with 3.3V Nominal Output Voltage, 0.15A Max Output Current, and 6V Max Input Voltage. It is ideal for applications requiring low dropout voltage and precise voltage regulation in compact designs.
TC1262-3.3VDB
Microchip TC1262-3.3VDB is a CMOS LDO regulator with 3.3V output voltage, 0.5A max current, and 2.5% voltage tolerance. Ideal for automotive applications due to TS 16949 screening level and operating temperature range of -40 to 125°C.
AMS1117-1.8
Advanced Monolithic Systems
AMS1117-1.8 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with a nominal output voltage of 1.8V and max output current of 1A. It has a small outline package style, Gull Wing terminal form, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LT1086IM-3.3#TRPBF
Analog Devices' LT1086IM-3.3#TRPBF is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces due to its small outline package style.
LM2936HVBMAX5.0/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 3 %;
REG1117-5/2K5
The Texas Instruments REG1117-5/2K5 is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.8A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and Gull Wing terminal form, it offers precise regulation with minimal dropout voltage for efficient performance.
PTPS7A2533DRVR
The Texas Instruments PTPS7A2533DRVR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.3A. It has a small outline package style, suitable for surface mount applications, and operates within an extended temperature range from -40°C to 125°C. Ideal for compact electronic devices requiring stable power supply with minimal dropout voltage.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP694D33HT1G
NCP694D33HT1G by Onsemi is a Fixed Positive Single Output LDO Regulator with 3.3V Nominal Output Voltage, 0.3A Max Output Current, and 85°C Max Operating Temperature. It is ideal for applications requiring stable voltage regulation in compact spaces due to its small outline package style and low dropout voltage of 0.1V.
NCP699SN18T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 3 %;
NCP698SQ33T1G
NCP698SQ33T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.08A. It has a small outline, thin profile package style and operates b/w -40 to 85°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
NCP606MN18T2G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 2 %;
NCP603SN330T1G
NCP603SN330T1G by Onsemi is a 3.3V fixed positive single output LDO regulator with 0.3A max output current, ideal for applications requiring stable voltage supply. It features a small outline package with matte tin finish and operates in temperatures ranging from -40 to 125°C. With a dropout voltage of 0.157V, it ensures efficient power delivery in compact designs.
NCP694H33HT1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSOF; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 2 %;
NCP698SQ30T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: TSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 3 %;
NCP662SQ30T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: TSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 4 %;
NCP693DMN33TCG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Voltage Tolerance: 2.6 %; JESD-30 Code: R-PDSO-N6;
NCP698SQ35T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: TSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 2 %;
NCP694DSAN33T1G
NCP692MN33T2G
NCP692MN33T2G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A. It has a nominal output voltage of 3.3V and can operate in temperatures ranging from -40°C to 125°C. This regulator is commonly used in applications that require stable and regulated power supply, such as consumer electronics and automotive systems.
NCP699SN33T1G
NCP698SQ15T1G
NCP600SN330T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 2 %;
NCP603SN300T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 3 %;
NCP603SN350T1G
NCP600SN180T1G
NCP600SN350T1G
NCP603SN500T1G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved