Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP6914AFCAT1G by Onsemi is a 20-terminal switching regulator with a nominal voltage of 3.6V, operating temperature range from -40 to 85 °C. It features a max output current of 1.6A and operates at a max switching frequency of 3300 kHz. Ideal for industrial applications requiring precise power management in compact spaces.
Median Price
$0.726
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.713
1k+ parts
$0.592
10k+ parts
$0.528
Verical
$0.740
$0.660
Digiode
$0.556
Netsource Technology, Inc.
Vyrian
Corphita
$0.526
Vigor
$0.560
Corohmni
$0.585
AZTECH Wire
$11.950
Continental Prestige Electronics
$0.466
TANS Electronics
SupplyDigital Components
Problanco Electronics
Kulean Microsystems
UHIMA Technologies
Microchip USA
Plastic package body provides good mechanical strength and durability.
Surface mount feature allows for easy and efficient PCB assembly.
Matches standard 3.6V supply voltage requirements, making it versatile for various applications.
Having 20 terminals provides flexibility for connecting to different components in the circuit.
High maximum operating temperature ensures reliability and performance in harsh environments.
High switching frequency allows for efficient power conversion and regulation.
PWM control technique offers precise control over the output voltage, improving overall efficiency.
Switching Regulators & Controllers NCP6914AFCAT1G attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Additional Features:
Other IC type:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
NCP6914AFCAT1G Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Devices 31/Jan/2019
PCN Design/Specification - Enthone/Material Chg 5/July/2017
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
LM3150MHX/NOPB
LM3150MHX/NOPB by Texas Instruments is a switching regulator with 14 terminals, operating at -40 to 125°C. It offers a max output voltage of 40V and current up to 12A, suitable for automotive applications. With hysteric current mode control technique and push-pull configuration, it supports input voltages from 6-42V and has a compact design with small outline package style.
TPSM82822SILR
TPSM82822SILR by Texas Instruments is a switching regulator with 2A output current, 5V nominal input voltage, and 4V max output voltage. Ideal for automotive applications due to its hybrid technology, PWM control technique, and compact rectangular package style. Operates efficiently in temperatures ranging from -40°C to 125°C.
FAN2002MPX
Fairchild Semiconductor
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
AP63205WU-7
SWITCHING REGULATOR; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
LMZ23605TZE/NOPB
LMZ23605TZE/NOPB by Texas Instruments is a switching regulator with 5A output current, 950 kHz max switching frequency, and 3.3V nominal output voltage. Ideal for industrial applications requiring efficient power management in a compact package.
LT8608EMSE#PBF
Analog Devices
LT8608EMSE#PBF by Analog Devices is a switching regulator with a max input voltage of 42V and a max switching frequency of 2200kHz. It operates in current-mode control and is suitable for applications requiring small outline, heat sink, and thin profile packages.
TPS560200DBVR
TPS560200DBVR by Texas Instruments is a switching regulator with a voltage-mode control technique. It has a max output current of 0.775A and operates at a max switching frequency of 600kHz. Ideal for automotive applications due to its small outline, low profile package style, and wide operating temperature range from -40°C to 125°C.
TPS54160DGQG4
TPS54160DGQG4 by Texas Instruments is a switching regulator with 1.5A output current, 2500 kHz max switching frequency, and 150°C max operating temperature. Ideal for automotive applications due to its compact size, pulse width modulation control technique, and wide input voltage range of 3.5V to 60V.
SG3525AN
Linfinity Microelectronics
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LT8640SIV#PBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 24; Package Code: HQCCN; Package Shape: SQUARE; Surface Mount: YES;
LMZ14203HTZX/NOPB
National Semiconductor
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Maximum Switching Frequency: 1000 kHz; Terminal Finish: MATTE TIN; Maximum Output Current: 3 A;
LM2678S-3.3/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
MC33063AD
MC33063AD by Texas Instruments is a voltage-mode switching regulator with 5V nominal input and output voltages up to 40V. It operates in industrial temperature range (-40°C to 85°C) with a max output current of 1.5A, making it suitable for various power supply applications. The IC features pulse width modulation control technique and buck-boost switcher configuration in a small outline package.
LMZ14203EXTTZE/NOPB
LMZ14203EXTTZE/NOPB by Texas Instruments is a switching regulator with 3A output current, 6V max output voltage, and 1000 kHz max switching frequency. Ideal for military applications due to its MILITARY temperature grade, it operates b/w -55°C to 125°C and has a compact rectangular package style.
LMR14010ADDCR
LMR14010ADDCR by Texas Instruments is a small outline, thin profile switching regulator with 6 terminals. It operates b/w -40 to 125°C, supporting input voltages from 4-40V and output currents up to 1A. Ideal for automotive applications due to its pulse width modulation control mode and buck switcher configuration at a max frequency of 700kHz.
PLMR38020FDDAR
The Texas Instruments PLMR38020FDDAR is a switching regulator with 8 terminals, operating b/w -40 to 150°C. It offers a max output voltage of 75V and current of 2A, suitable for applications requiring efficient power conversion at high frequencies up to 2200 kHz. Ideal for compact designs needing precise current-mode control in various electronic systems.
MC34063ADG
Shenzhen Changyuntong Ic Design
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LTC3646HDE-1#PBF
LTC3646HDE-1#PBF by Analog Devices is a current-mode switching regulator with 14 terminals, operating from -40 to 150°C. It has a buck configuration, supporting input voltages from 4V to 40V and output at 5V. Ideal for automotive applications due to its small size (4x3mm) and high max switching frequency of 3kHz.
LM51561DSSR
LM51561DSSR by Texas Instruments is a switching controller with a 12V nominal input voltage and 300V max output voltage. Operating in current-mode control technique, it has a max switching frequency of 500 kHz. Ideal for automotive applications due to its -40 to 125 °C temperature grade range.
LTM8074IY#PBF
LTM8074IY#PBF by Analog Devices is a switching regulator with 25 terminals, operating temperature range of -40 to 125°C, and max frequency of 2200 kHz. Ideal for automotive applications due to its fine pitch grid array package style and pulse width modulation control technique.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP6334BMTAATBG
NCP6334BMTAATBG by Onsemi is a VOLTAGE-MODE BUCK SWITCHING REGULATOR with 3.3A output current, 3300 kHz switching frequency, and 85°C max operating temp. Ideal for industrial applications requiring efficient power management in a compact package.
NCP6335DFCT1G
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 20; Package Code: FBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP6324BMTAATBG
NCP6324BMTAATBG by Onsemi is a switching regulator with 2A output current, 3300kHz max switching frequency, and VOLTAGE-MODE control mode. Ideal for industrial applications requiring a compact design and efficient power management in a small outline package.
NCP6335FFCT1G
NCP6335FFCT1G by Onsemi is a switching regulator with a max output current of 4A and a max switching frequency of 3150kHz. It operates in voltage-mode control and is suitable for industrial applications.
NCP6334CMTAATBG
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
NCP6324CMTAATBG
NCP6335FFCT2G
NCP6343AFCCT1G
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 15; Package Code: VFBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP6343AVFCCT1G
NCP6343BFCCT1G
NCP6131S52MNR2G
SWITCHING CONTROLLER; No. of Terminals: 52; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES; Terminal Form: NO LEAD;
NCP6133MNTWG
DUAL SWITCHING CONTROLLER; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN;
NCP6332BMTAATBG
NCP6323DMTAATBG
NCP6132BMNR2G
Switching Regulator or Controllers; Temperature Grade: OTHER; No. of Terminals: 60; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
NCP6151S52MNR2G
SWITCHING CONTROLLER; No. of Terminals: 52; Package Code: QCCN; Package Shape: RECTANGULAR; Surface Mount: YES; Peak Reflow Temperature (C): 260;
NCP6332CMTAATBG
NCP6131D52MNR2G
SWITCHING CONTROLLER; No. of Terminals: 52; Package Code: BCC; Package Shape: SQUARE; Surface Mount: YES; Terminal Finish: TIN;
NCP6132AMNR2G
NCP6251MNR2G
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved