Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP6335FFCT2G by Onsemi is a voltage-mode switching regulator with max output current of 4A and max switching frequency of 3150 kHz. It operates in industrial temperature range (-40 to 85 °C) and comes in a surface mount rectangular package style. Ideal for power management applications requiring high efficiency and compact design.
Median Price
$0.528
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$2.490
100+ parts
$0.856
1k+ parts
$0.646
10k+ parts
-
Rochester
$0.509
$0.423
$0.377
DigiKey
$0.640
Farnell
$0.391
Verical
$0.471
Vyrian
Digiode
Chip Stock
Corphita
$0.371
Corohmni
Vigor
$0.400
Continental Prestige Electronics
$0.395
Perfect Parts
SupplyDigital Components
Problanco Electronics
Kulean Microsystems
TANS Electronics
S.R.D Solutions
Authorized Procurement Solutions
GreenTree Electronics
Futuretech Components
UHIMA Technologies
Microchip USA
PLASTIC/EPOXY material provides good durability and reliability for long-term use.
Surface mount capability allows for easy and convenient installation on PCBs.
Rectangular shape makes it easy to fit into various electronic designs.
Having 20 terminals allows for versatile connectivity options.
Grid array with fine pitch improves electrical performance and signal integrity.
High maximum operating temperature ensures stability in various environmental conditions.
Voltage-mode control mode provides precise regulation and efficiency.
Low minimum operating temperature allows for reliable performance in harsh environments.
Bottom terminal position enables easy connection to the PCB.
Switching regulator IC type ensures efficient power conversion.
Industrial temperature grade ensures reliability in demanding industrial environments.
High switching frequency allows for fast response and efficient operation.
High maximum output current enables powering multiple components or devices.
Ball terminal form provides secure and reliable connections.
Fine terminal pitch allows for compact design and high-density integration.
Switching Regulators & Controllers NCP6335FFCT2G attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Mode:
JESD-30 Code:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Sub-Category:
Surface Mount:
Maximum Switching Frequency:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
NCP6335FFCT2G Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Devices EOL 26/Jul/2018
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
Semitron
Diotec Electronics
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
General Semiconductor
MAX17502FATB+T
Analog Devices
Analog Devices' MAX17502FATB+T is a current-mode switching regulator with a max output current of 1.9A and a buck switcher configuration. Operating temperature ranges from -40 to 125°C, making it suitable for automotive applications. With a wide input voltage range of 4.5V to 60V, it is ideal for various power management needs in compact designs.
TPS82130SILT
TPS82130SILT by Texas Instruments is a voltage-mode switching regulator with 3A output current, operating at -40 to 125°C. Ideal for automotive applications, it offers a wide input voltage range of 3-17V and a compact package style of 2.8mm x 3mm, making it suitable for space-constrained designs.
LM5017SDE/NOPB
LM5017SDE/NOPB by Texas Instruments is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It offers a max output voltage of 90V and current of 0.6A, suitable for automotive applications due to its compact size and high switching frequency of up to 1000 kHz.
LM25116MHX/NOPB
National Semiconductor
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM3150MHE/NOPB
LM3150MHE/NOPB by Texas Instruments is a switching regulator with 14 terminals, operating temperature range of -40 to 125°C, and output current up to 12A. It features hysteric current mode control, push-pull switcher configuration, and supports input voltages from 6V to 42V. Ideal for automotive applications due to its compact size (5x4.4mm) and high switching frequency of up to 1MHz.
LMR51420XDDCR
LMR51420XDDCR by Texas Instruments is a switching regulator with 2A output current, 1100kHz max switching frequency, and 34.2V max output voltage. Ideal for applications requiring efficient power conversion in compact spaces due to its small outline and thin profile package style.
PTN78060WAZT
PTN78060WAZT by Texas Instruments is a switching regulator with 7 terminals, offering a max output current of 3A and a max output voltage of 12.6V. It operates in industrial temperature grades and uses pulse width modulation for control, making it suitable for various buck converter applications.
TPS54331DRG4
TPS54331DRG4 by Texas Instruments is a switching regulator with 3A output current, 570kHz max frequency, and -40 to 150°C operating temp. Ideal for automotive applications due to its small outline package and pulse width modulation control mode.
LM22680MRX-ADJ/NOPB
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Switching Frequency: 600 kHz;
LM2675MX-3.3/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM5122MHE/NOPB
LM5122MHE/NOPB by Texas Instruments is a switching controller with a current-mode control technique. It operates in a wide temperature range from -40 to 125°C and supports input voltages ranging from 3V to 65V. With a max output voltage of 100V and a compact package style, it is ideal for automotive applications requiring high efficiency and precise voltage regulation.
TPS5450DDAG4
TPS5450DDAG4 by Texas Instruments is a voltage-mode switching regulator with 8 terminals, operating b/w -40 to 125°C. It supports a max output current of 5A and has a wide input voltage range from 5.5V to 36V, making it suitable for automotive applications requiring efficient power management in compact spaces.
LM51561QDSSRQ1
Texas Instruments' LM51561QDSSRQ1 is an AEC-Q100 rated switching controller with a 12V nominal input voltage. It operates in automotive applications, offering a max output voltage of 300V and a control mode of current-mode PWM. With a compact rectangular package and dual terminal position, it supports a wide temperature range from -40°C to 150°C.
TPS63001DRCT
TPS63001DRCT by Texas Instruments is a 10-terminal switching regulator with a max output voltage of 3.3V and current up to 2A. Ideal for industrial applications, it operates b/w -40°C to 85°C using pulse width modulation control mode at a frequency of up to 1500 kHz.
LM2674M-5.0
LM5007SDX/NOPB
LM5007SDX/NOPB by Texas Instruments is a switching regulator with 8 terminals, operating at -40 to 125°C. It has a max output voltage of 73V and can handle up to 0.5A output current. Ideal for automotive applications due to its small size, high efficiency (800 kHz), and wide input voltage range of 9-75V.
LMZ23603TZE/NOPB
LMZ23603TZE/NOPB by Texas Instruments is a switching regulator with 3A output current, 950kHz max switching frequency, and 6V max output voltage. Ideal for industrial applications requiring a compact design and efficient power management in temperature-sensitive environments.
LM5008MM
LM5008MM by Texas Instruments is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It supports input voltages from 9.5V to 95V and outputs up to 7V at 0.61A. Ideal for automotive applications due to its compact size, high efficiency (up to 600kHz), and current-mode control technique.
UC2825DW
Unitrode
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS84250RKGR
TPS84250RKGR by Texas Instruments is a voltage-mode switching regulator with a max output current of 2.5A and a max input voltage of 50V. It operates in an industrial temperature grade range from -40 to 85°C, making it suitable for various applications requiring efficient power conversion in compact spaces. With a package style of chip carrier and heat sink/slug, this regulator is ideal for use in electronic devices where space-saving and high performance are essential.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP6334BMTAATBG
NCP6334BMTAATBG by Onsemi is a VOLTAGE-MODE BUCK SWITCHING REGULATOR with 3.3A output current, 3300 kHz switching frequency, and 85°C max operating temp. Ideal for industrial applications requiring efficient power management in a compact package.
NCP6335DFCT1G
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 20; Package Code: FBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP6324BMTAATBG
NCP6324BMTAATBG by Onsemi is a switching regulator with 2A output current, 3300kHz max switching frequency, and VOLTAGE-MODE control mode. Ideal for industrial applications requiring a compact design and efficient power management in a small outline package.
NCP6335FFCT1G
NCP6335FFCT1G by Onsemi is a switching regulator with a max output current of 4A and a max switching frequency of 3150kHz. It operates in voltage-mode control and is suitable for industrial applications.
NCP6334CMTAATBG
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
NCP6324CMTAATBG
NCP6343AFCCT1G
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 15; Package Code: VFBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP6343AVFCCT1G
NCP6343BFCCT1G
NCP6131S52MNR2G
SWITCHING CONTROLLER; No. of Terminals: 52; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES; Terminal Form: NO LEAD;
NCP6133MNTWG
DUAL SWITCHING CONTROLLER; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN;
NCP6332BMTAATBG
NCP6323DMTAATBG
NCP6132BMNR2G
Switching Regulator or Controllers; Temperature Grade: OTHER; No. of Terminals: 60; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
NCP6151S52MNR2G
SWITCHING CONTROLLER; No. of Terminals: 52; Package Code: QCCN; Package Shape: RECTANGULAR; Surface Mount: YES; Peak Reflow Temperature (C): 260;
NCP6332CMTAATBG
NCP6131D52MNR2G
SWITCHING CONTROLLER; No. of Terminals: 52; Package Code: BCC; Package Shape: SQUARE; Surface Mount: YES; Terminal Finish: TIN;
NCP6132AMNR2G
NCP6251MNR2G
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved