Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP6132BMNR2G by Onsemi is a 60-terminal chip carrier switching regulator with max operating temp of 100 °C, min operating temp of -10°C, and max switching frequency of 800 kHz. Ideal for applications requiring current-mode control in a compact square package.
Median Price
$1.100
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$42.380
100+ parts
-
1k+ parts
10k+ parts
Rochester
$1.080
$0.896
$0.799
Avnet
$0.950
$0.870
$0.820
DigiKey
$1.350
Farnell
$0.815
Verical
$1.121
$0.999
Digiode
$0.844
Chip Stock
Vyrian
Cyclops Electronics Ltd
Ampacity Inc.
$0.690
Corphita
Corohmni
Vigor
$0.850
AZTECH Wire
$12.070
Continental Prestige Electronics
$0.746
Perfect Parts
SupplyDigital Components
Kepictronics
TANS Electronics
Kulean Microsystems
Problanco Electronics
UHIMA Technologies
Futuretech Components
Microchip USA
The use of plastic/epoxy makes the product lightweight, durable, and resistant to impact and moisture, which is ideal for portable and outdoor applications.
Being surface mountable allows for easy and compact integration onto circuit boards, saving space and facilitating automated assembly processes.
With a high maximum operating temperature, this product can withstand demanding operating conditions without compromising performance or reliability.
Current-mode control offers better transient response, improved stability, and enhanced noise immunity, making the product suitable for applications requiring precise current regulation.
The high maximum switching frequency allows for efficient power conversion, reduced component size, and minimized output voltage ripple, making it suitable for high-frequency applications.
Switching Regulators & Controllers NCP6132BMNR2G attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Control Mode:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Sub-Category:
Surface Mount:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
NCP6132BMNR2G Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - 3Q2105 EOL 6/Nov/2015
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Eic Semiconductor
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
Formosa Microsemi
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM3478MM/NOPB
National Semiconductor
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
LM5008AMM/NOPB
Texas Instruments
LM5008AMM/NOPB by Texas Instruments is a switching regulator with 8 terminals, operating temperature range of -40 to 125°C, and output current up to 0.35A. It is ideal for automotive applications due to its small outline, thin profile package style, and wide input voltage range from 6V to 95V. With a max output voltage of 75V and switching frequency of 600kHz, it offers efficient buck configuration for various power supply needs.
LMZ31704RVQT
LMZ31704RVQT by Texas Instruments is a current-mode switching regulator with 4A output current, 1.8V nominal output voltage, and 1200kHz max switching frequency. Ideal for industrial applications requiring efficient power management in a compact chip carrier package style.
FAN2001MPX
FAN2001MPX by Onsemi is a switching regulator with 2A output current and 1500kHz max switching frequency. Ideal for industrial applications, it operates b/w -40 to 85°C, in a square package style with 6 terminals for surface mount assembly.
LM5118MH/NOPB
LM5118MH/NOPB by Texas Instruments is a switching regulator with 20 terminals, operating temperature range of -40 to 125°C, and output voltage up to 70V. Ideal for automotive applications, it features current-mode control, PWM technique, and buck-boost configuration for efficient power management in compact designs.
LM5008MMX/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
LM2576T-ADJ
Taejin Technology
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Input Voltage: 40 V;
LM2596T-5.0/NOPB
LM2596T-5.0/NOPB by Texas Instruments is a 3A BUCK switching regulator with an input voltage range of 4.5V to 40V and output voltage of 5V. It operates in voltage-mode control with a max frequency of 173kHz, making it suitable for automotive applications due to its temperature grade up to 125°C.
LM5007SDX/NOPB
LM5007SDX/NOPB by Texas Instruments is a switching regulator with 8 terminals, operating at -40 to 125°C. It has a max output voltage of 73V and can handle up to 0.5A output current. Ideal for automotive applications due to its small size, high efficiency (800 kHz), and wide input voltage range of 9-75V.
LM25118MH/NOPB
LM25118MH/NOPB by Texas Instruments is a switching controller with a current-mode control technique. It operates in a wide temperature range from -40 to 125°C and supports a max output current of 10A at a max switching frequency of 500kHz. Ideal for automotive applications, this compact IC offers buck-boost configuration and can handle input voltages ranging from 3V to 42V.
LM2596SX-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS61170DRVT
TPS61170DRVT by Texas Instruments is a switching regulator with a max output current of 1.44A and max output voltage of 38V. It operates in a temperature range from -40 to 85°C, making it suitable for industrial applications requiring precise current-mode control. With a compact square package style and pulse width modulation technique, it is ideal for space-constrained designs needing efficient power conversion.
TPS60403DBVR
TPS60403DBVR by Texas Instruments is a small outline, low profile switching regulator with 5 terminals. It operates at -40 to 85°C and has a max output current of 0.06A. Ideal for industrial applications requiring a switched capacitor converter with input voltage range of 1.8-5.25V.
LM2596SX-3.3/NOPB
LM2596SX-3.3/NOPB by Texas Instruments is a switching regulator with a max output current of 3A, ideal for automotive applications. It operates b/w -40 to 125°C, with a voltage-mode control mode and buck switcher config. With a small outline package style and surface mount capability, it's versatile for various electronic designs.
PUCC12050DVE
The Texas Instruments PUCC12050DVE is a 16-terminal switching regulator with a nominal input voltage of 5V and output voltage of 3.3V. With a temperature range from -40 to 125°C, it's ideal for automotive applications. This compact device in small outline package is surface mountable and features gull wing terminals.
TPS62410DRCRG4
TPS62410DRCRG4 by Texas Instruments is a dual switching controller with a max output current of 0.8A and a max switching frequency of 2500kHz. It operates in voltage-mode control technique, suitable for industrial applications requiring precise power regulation in compact spaces.
SG3525AP013TR
SG3525AP013TR by STMicroelectronics is a 16-terminal switching controller with PWM control mode, operating b/w 0-70°C. It has a max output current of 0.5A and supports a max switching frequency of 500kHz. Ideal for applications requiring voltage-mode control in small outline packages.
TPS62040DGQR
TPS62040DGQR by Texas Instruments is a switching regulator with 10 terminals, operating temperature range of -40 to 85°C, and output voltage range from 0.7V to 6V. It is ideal for industrial applications requiring a compact design, high efficiency (up to 1500 kHz), and max output current of 2.2A.
MC33063ADR2G
MC33063ADR2G by Onsemi is a voltage-mode switching regulator with max output current of 1.5A and max input voltage of 40V. It operates in industrial temp range (-40 to 85°C) using pulse width modulation control technique. Ideal for applications requiring efficient buck-boost switcher config at up to 100kHz frequency.
LM2675M-5.0
LM2675M-5.0 by Texas Instruments is a voltage-mode switching regulator with 1A output current, 5V nominal output voltage, and 260 kHz max switching frequency. Ideal for automotive applications due to its DMOS technology and wide operating temperature range (-40 to 125°C).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP6334BMTAATBG
NCP6334BMTAATBG by Onsemi is a VOLTAGE-MODE BUCK SWITCHING REGULATOR with 3.3A output current, 3300 kHz switching frequency, and 85°C max operating temp. Ideal for industrial applications requiring efficient power management in a compact package.
NCP6335DFCT1G
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 20; Package Code: FBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP6324BMTAATBG
NCP6324BMTAATBG by Onsemi is a switching regulator with 2A output current, 3300kHz max switching frequency, and VOLTAGE-MODE control mode. Ideal for industrial applications requiring a compact design and efficient power management in a small outline package.
NCP6335FFCT1G
NCP6335FFCT1G by Onsemi is a switching regulator with a max output current of 4A and a max switching frequency of 3150kHz. It operates in voltage-mode control and is suitable for industrial applications.
NCP6334CMTAATBG
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
NCP6324CMTAATBG
NCP6335FFCT2G
NCP6343AFCCT1G
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 15; Package Code: VFBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP6343AVFCCT1G
NCP6343BFCCT1G
NCP6131S52MNR2G
SWITCHING CONTROLLER; No. of Terminals: 52; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES; Terminal Form: NO LEAD;
NCP6133MNTWG
DUAL SWITCHING CONTROLLER; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN;
NCP6332BMTAATBG
NCP6323DMTAATBG
NCP6151S52MNR2G
SWITCHING CONTROLLER; No. of Terminals: 52; Package Code: QCCN; Package Shape: RECTANGULAR; Surface Mount: YES; Peak Reflow Temperature (C): 260;
NCP6332CMTAATBG
NCP6131D52MNR2G
SWITCHING CONTROLLER; No. of Terminals: 52; Package Code: BCC; Package Shape: SQUARE; Surface Mount: YES; Terminal Finish: TIN;
NCP6132AMNR2G
Switching Regulator or Controllers; Temperature Grade: OTHER; No. of Terminals: 60; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
NCP6251MNR2G
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved