Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP5604AMTR2G by Onsemi is a LED display driver with 16 terminals, operating voltage range of 2.7V to 5.5V, and industrial temperature grade up to 85 °C. It comes in a square chip carrier package style suitable for graphics applications requiring precise power supplies and compact design.
Median Price
$0.942
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.925
1k+ parts
$0.767
10k+ parts
$0.684
Verical
$0.959
$0.855
Digiode
$0.720
Vyrian
J2 Sourcing AB
Cyclops Electronics Ltd
Corphita
$0.682
Vigor
$0.730
Corohmni
$0.758
AZTECH Wire
$8.820
Continental Prestige Electronics
Authorized Procurement Solutions
SupplyDigital Components
Assy Fe
Kulean Microsystems
TANS Electronics
Problanco Electronics
Kepictronics
UHIMA Technologies
Microchip USA
Surface mount technology allows for smaller size, lower weight, and improved heat dissipation in the product.
Ability to handle higher supply voltage levels ensures reliability and stability in various applications.
Square package shape provides easy mounting and alignment in circuit boards for efficient assembly.
Support for both 3V and 5V power supplies allows flexibility in application compatibility.
Higher number of terminals enable more features and functionalities to be integrated into the product.
Various package styles provide options for different mounting and thermal management needs in a compact form factor.
Low minimum supply voltage ensures compatibility with a wide range of power sources.
High maximum operating temperature ensures reliability in harsh environmental conditions.
Low minimum operating temperature allows for operation in extreme cold conditions.
Matte tin finish provides good solderability and conductivity for stable electrical connections.
Quad terminal position enhances signal integrity and reduces electromagnetic interference.
Low seated height allows for a slim and compact design, suitable for space-constrained applications.
Compact width enables easy integration into tight spaces on circuit boards.
High peak reflow temperature ensures reliable solder joints during manufacturing processes.
Small length contributes to the overall compact form factor of the product.
Industrial temperature grade ensures reliable operation in demanding industrial environments.
Lead-free terminal form complies with environmental regulations and reduces the risk of lead contamination.
Stable nominal supply voltage of 3.3V ensures consistent performance across various applications.
Four segments provide multi-functional display capabilities for diverse user interface requirements.
Fine terminal pitch of 0.5mm allows for high-density mounting and compact PCB designs.
Specialized interface IC type specifically designed for driving LED displays ensures optimized performance and energy efficiency.
Graphics Display Drivers NCP5604AMTR2G attributes and parameters. Explore more Graphics Display Drivers devices from Onsemi
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Multiplexed Display Capability:
No. of Functions:
No. of Segments:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
NCP5604AMTR2G Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 30/Jun/2011
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
0460-202-16141
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MIC2299-15YML-TR
Micrel
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: HVQCCN; Package Shape: SQUARE;
TLC59108IRGYR
TLC59108IRGYR by Texas Instruments is an LED display driver with 8 channels, operating voltage of 3-5.5V, and constant-current output. Ideal for graphics displays, it features a serial data input mode, industrial temperature grade, and quad terminal position.
LM3409MYX/NOPB
LM3409MYX/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 42V and constant-current output. It operates in automotive-grade temperatures (-40 to 125°C) and has a small outline package style for space-constrained applications. Ideal for LED display driving, it features dual terminals and matte tin finish.
MIC2292-34YML-TR
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
CAT4016Y-T2
Catalyst Semiconductor
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR;
PCF8577CT/3,118
NXP Semiconductors
PCF8577CT/3,118 by NXP Semiconductors is a graphics display driver with dot matrix display mode and serial data input. It operates b/w -40 to 85 °C with a supply voltage range of 2.5-6 V, suitable for industrial applications requiring multiplexed display capability.
CAT4016Y-T2 by Onsemi is a graphics display driver with 16 segments. It operates at 3-5.5V, -40 to 85°C, and has a max fmax of 25MHz. Ideal for LED displays, it features a small outline package with dual terminals and matte tin finish.
ICM7224IPL
Maxim Integrated
ICM7224IPL by Maxim Integrated is a 40-terminal graphics display driver with serial data input mode. It operates b/w -20 to 85 °C and supports liquid crystal displays with 29 segments. With a CMOS technology, it has a max supply voltage of 6 V and min of 3 V, making it suitable for various display applications.
LM3409QHVMY/NOPB
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 260;
LM3914N-1/NOPB
LM3914N-1/NOPB by Texas Instruments is a LED display driver with 10 segments and 10-digit capacity. It operates b/w 3V to 20V, making it suitable for various applications. With a rectangular package style and through-hole terminal form, it is commonly used in bar graph display mode for graphic applications.
PCA9635PW
PCA9635PW by NXP Semiconductors is a serial graphics display driver with 16 segments. It operates b/w -40 to 85 °C and supports a supply voltage range of 2.3-5.5 V. Ideal for LED displays, it comes in a small outline package with dual terminals and Gull Wing form factor.
MAX25611CATC/VY+T
LED DISPLAY DRIVER; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3;
TPS92512HVDGQR
TPS92512HVDGQR by Texas Instruments is a LED display driver with 10 terminals, operating at -40 to 125 °C. It has a supply voltage range of 4.5-60 V and is suitable for automotive applications due to its small outline package style.
ICM7218BIJI
General Electric Solid State
Display Drivers; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR;
LT3952AHFE#WPBF
Analog Devices
Analog Devices' LT3952AHFE#WPBF is a LED display driver with 16 segments, operating voltage range of 3-42V. AEC-Q100 qualified for automotive applications, it has a small outline package with 28 terminals and operates b/w -40 to 150°C.
LM27966SQ/NOPB
LM27966SQ/NOPB by Texas Instruments is a graphics display driver with a serial data input mode. It operates at a max supply voltage of 5.5V and has 6 channels. This IC is commonly used as an LED display driver in various applications.
STP16CP05MTR
STMicroelectronics
STP16CP05MTR by STMicroelectronics is a graphics display driver with 16 segments, serial data input mode, and 30 MHz min fmax. Ideal for automotive applications, it operates b/w -40 to 125 °C with a supply voltage range of 3-5.5 V. This small outline package features a Gull Wing terminal form and is suitable for LED display driving in various devices.
TLC5927IPWPR
TLC5927IPWPR by Texas Instruments is a graphics display driver with 24 terminals, operating voltage of 3-5.5V, and constant-current output for LED displays. It features a serial data input mode, small outline package style, and dual terminal position. Ideal for automotive applications due to its wide temperature range (-40 to 125°C) and moisture sensitivity level of 2.
TPS92638QPWPRQ1
TPS92638QPWPRQ1 by Texas Instruments is an LED display driver with 8 channels, suitable for automotive applications. It operates b/w -40 to 125 °C and supports a supply voltage range of 5-40 V. The package style is small outline with a max seated height of 1.2 mm, making it ideal for compact designs in automotive displays.
TPS92512HVDGQT
TPS92512HVDGQT by Texas Instruments is a LED display driver with 3 segments, operating at 4.5-60V, suitable for automotive applications. It has a small outline package with 10 terminals and can withstand temperatures from -40 to 125°C. The terminal finish is nickel palladium gold silver, making it ideal for graphics display drivers.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP5623DTBR2G
NCP5623DTBR2G by Onsemi is a graphics display driver with serial data input mode, 14 terminals, and 3/5V power supplies. It operates in industrial temperature range (-40 to 85°C) and is suitable for LED display driver applications. The package style is small outline, thin profile, with shrink pitch, making it ideal for compact designs.
NCP5006SNT1G
NCP5006SNT1G by Onsemi is a graphics display driver with 5.5V max supply voltage, suitable for LED displays. It operates b/w -25 to 85°C, has 3/5V power supplies, and a small outline package style. Ideal for applications requiring compact design and efficient power management.
NCP5623CMUTBG
NCP5623CMUTBG by Onsemi is a graphics display driver with serial data input mode, operating voltage range of 2.7V to 5.5V, and industrial temperature grade. It features a chip carrier package style with 12 terminals and is suitable for LED display driver applications in various industries.
NCP5623BMUTBG
NCP5623BMUTBG by Onsemi is a graphics display driver with serial data input mode, 12 terminals, and 3/5V power supplies. It features a very thin profile grid array package suitable for LED displays. Operating temperature ranges from -40 to 85°C, making it ideal for industrial applications.
NCP5603MNR2G
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 10; Package Code: HVQCCN; Package Shape: SQUARE;
NCP5007SNT1G
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
NCP5623AMUTBG
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: HVQCCN; Package Shape: SQUARE;
NCP5623MUTBG
NCP5612MUTBG
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BUTT; No. of Terminals: 12; Package Code: VFBGA; Package Shape: SQUARE;
NCP5007SNT1
NCP5021MUTXG
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
NCP5009DMR2
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
NCP5006SNT1
NCP5602MUTBG
NCP5602MUTBG by Onsemi is a graphics display driver with serial data input mode and 12 terminals. It operates b/w -40 to 85 °C, suitable for industrial applications. The chip carrier package has a square shape, very thin profile, and nickel/palladium/gold terminal finish.
NCP5603MNR2
NCP5008DMR2
NCP5005SNT1G
NCP5604BMTR2G
NCP5008DMR2G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved