Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP511SN50T1 by Onsemi is a 5V fixed positive single output LDO regulator with a max dropout voltage of 0.2V and max output current of 0.15A. It is ideal for applications requiring stable voltage regulation in compact spaces, such as portable electronic devices or IoT sensors.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
AZTECH Wire
$15.150
TANS Electronics
Problanco Electronics
A-Z Elektronik GmbH
SupplyDigital Components
Corphita
RC Electronics
Kulean Microsystems
Microchip USA
UHIMA Technologies
Corohmni
Vigor
The use of plastic/epoxy material makes the package lightweight and durable, ensuring a longer lifespan for the product.
With a low maximum dropout voltage of 1.2V, this regulator can maintain a stable output voltage even when the input voltage drops, providing reliable performance.
Being surface mountable, this regulator is easy to assemble on circuit boards, saving space and allowing for efficient PCB layout design.
With a high operating temperature of 125 °C, this regulator can withstand elevated temperatures, suitable for applications where heat dissipation is a concern.
The CMOS technology used in this regulator ensures low power consumption and high noise immunity, making it suitable for battery-powered devices and sensitive electronic equipment.
The rectangular package shape allows for easy integration into circuit designs, providing a compact and space-efficient solution.
The gull wing terminal form facilitates easy soldering and connection to the PCB, ensuring a secure and reliable electrical connection.
The TR packing method provides protection during transportation and storage, preventing damage to the regulator before it is installed in the final product.
With a minimum output voltage of 4.9V, this regulator can provide a stable voltage supply even at lower input voltages, ensuring consistent performance.
The narrow voltage tolerance of 2% ensures accurate and precise output voltage regulation, making this regulator suitable for applications requiring tight voltage control.
The nominal output voltage of 5V is a common voltage level used in many electronic devices, making this regulator compatible with a wide range of applications.
Having 5 terminals allows for easy connection and integration into the circuit, providing multiple points for input, output, and ground connections.
The small outline, thin profile, and shrink pitch package style make this regulator compact and space-saving, ideal for designs where size is a critical factor.
The fixed adjustability of this regulator eliminates the need for external adjustments, simplifying the design and ensuring stable operation without the risk of tampering.
With a maximum operating temperature of 85 °C, this regulator can function reliably in a variety of environments, including industrial and automotive applications.
The narrow terminal pitch of 0.95mm allows for high-density mounting on the PCB, enabling a compact design and efficient use of board space.
The low maximum line regulation of 0.0175% ensures stable output voltage even with fluctuations in the input voltage, providing consistent performance under varying load conditions.
With a minimum operating temperature of -40 °C, this regulator can function in harsh cold environments, suitable for outdoor and automotive applications.
As a fixed positive single output LDO regulator, this product offers precise voltage regulation and low dropout characteristics, making it suitable for applications requiring a stable voltage supply.
The tin/lead terminal finish provides good solderability and corrosion resistance, ensuring a reliable electrical connection and long-term performance.
Having dual terminal positions allows for flexibility in the mounting orientation, making it easier to integrate this regulator into various PCB layouts.
With a maximum output voltage of 5.1V, this regulator can provide slightly higher voltage levels when needed, offering versatility in the range of compatible applications.
The low maximum seated height of 1.1mm allows for a compact and slim profile, suitable for space-constrained designs and applications where height clearance is limited.
The narrow width of 1.5mm makes this regulator suitable for applications where board space is limited, enabling a more compact and efficient layout.
The low maximum load regulation of 0.119% ensures stable output voltage under varying load conditions, maintaining consistent performance for different operating scenarios.
With a minimum input voltage of 5.5V, this regulator can operate effectively with a wide range of input voltages, providing flexibility in the choice of power sources.
Capable of delivering a maximum output current of 0.15A, this regulator is suitable for powering low to moderate power devices and circuits, making it versatile for various applications.
With a maximum time of 30 seconds at peak reflow temperature, this regulator can withstand the soldering process without damage, ensuring reliable and robust assembly.
The high peak reflow temperature of 235 °C allows for efficient soldering during the assembly process, ensuring a strong and durable connection to the PCB.
With a low nominal dropout voltage of 0.075V, this regulator minimizes power loss and improves efficiency by maintaining a small voltage differential between input and output.
The compact length of 3mm contributes to the overall small footprint of this regulator, making it suitable for applications where space is limited.
With a maximum input voltage of 6V, this regulator can handle a wide range of input voltages, providing flexibility and compatibility with various power sources.
The maximum absolute input voltage of 6V ensures that the regulator is protected against voltage spikes and overvoltage conditions, safeguarding the downstream components.
Fixed Regulators - Positive Single Output LDO NCP511SN50T1 attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Onsemi
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
NCP511SN50T1 Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 27/Jun/2007
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
Plessey Semiconductors Discrete Components Div
Other Transistors;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
MIC5205-2.5YM5-TR
Micrel
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Terminal Position: DUAL;
LP2985IM5-3.3
LP2985IM5-3.3 by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.15A max output current. It has a small outline package style, Gull Wing terminal form, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
ADM7172ACPZ-2.5-R7
Analog Devices
ADM7172ACPZ-2.5-R7 by Analog Devices is a Fixed Positive Single Output LDO Regulator with 2A max output current, 2.5V nominal output voltage, and 1.5% max voltage tolerance. Ideal for applications requiring stable power supply in compact spaces due to its very thin profile chip carrier package style.
MCP1826S-3302E/DB
Microchip Technology
MCP1826S-3302E/DB by Microchip is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 1A max output current. It has a small outline package style, matte tin terminal finish, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
LM1117SX-3.3/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;
AMS1117-1.8
Advanced Monolithic Systems
AMS1117-1.8 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with a nominal output voltage of 1.8V and max output current of 1A. It has a small outline package style, Gull Wing terminal form, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LD1086DT33TR
LD1086DT33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
MIC5235-3.3YM5-TR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Terminal Position: DUAL; Maximum Output Current-1: .15 A;
LT1086IM-3.3#PBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2 %;
LT1129CST-5#PBF
Analog Devices' LT1129CST-5#PBF is a fixed positive single output LDO regulator with 0.7A max output current and 5V nominal output voltage. It operates b/w 0°C to 125°C, suitable for applications requiring stable voltage regulation in compact spaces. With a dropout voltage of 0.7V, it's ideal for surface mount designs where space is limited.
LT3010EMS8E-5#PBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 80 V; Maximum Voltage Tolerance: 3 %;
MC33269ST-3.3T3G
MC33269ST-3.3T3G by Onsemi is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.8A max output current. It has a small outline package style, operates at -40 to 150°C, and features a max dropout voltage of 1.35V. Ideal for applications requiring stable voltage regulation in compact spaces like IoT devices and portable electronics.
LM1084ISX-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 27 V; Maximum Voltage Tolerance: 2 %;
LP2985AIM5-2.5/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 3.5 %;
LM2940T-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE;
MIC29302AWD-TR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR;
MIC5353-3.3YMT-TR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; JESD-609 Code: e4; Moisture Sensitivity Level (MSL): 1;
LP2985A-33DBVRG4
Texas Instruments LP2985A-33DBVRG4 is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.15A max output current. It has a small outline package style, suitable for applications requiring low dropout voltage and precise voltage regulation in a compact design. Operating temperature range from -40 to 125°C makes it ideal for various electronic devices.
LD1117DT50TR
LD1117DT50TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 1.3A. It operates in an input voltage range of 6.5V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. With a small outline package style and gull wing terminal form, this regulator is ideal for surface mount applications where space is limited.
SPX3819M5-L-3-3/TR
Exar
Exar's SPX3819M5-L-3-3/TR is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.5A max output current. It features a small outline, low profile package style and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP511SN33T1G
NCP511SN33T1G by Onsemi is a 3.3V fixed positive LDO regulator with a max output current of 0.15A and dropout voltage of 0.2V, suitable for applications requiring stable voltage supply in compact designs. Operating temperature range from -40 to 125°C makes it versatile for various environments, while its small outline package with dual terminals ensures easy integration in space-constrained PCB layouts.
NCP508SQ33T1G
NCP508SQ33T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.04A. It has a small outline package style, making it suitable for surface mount applications where precise voltage regulation is required within an operating temperature range of -40 to 125°C. The regulator offers low dropout voltage at 0.3V and excellent line/load regulation for reliable performance in various electronic devices.
NCP5501DT33RKG
NCP5501DT33RKG by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.5A. It has a small outline package style, operates at temperatures ranging from -40 to 85°C, and is suitable for applications requiring stable voltage regulation in electronic circuits.
NCP551SN33T1G
NCP551SN33T1G by Onsemi is a 3.3V fixed positive single output LDO regulator with a max dropout voltage of 0.15V and operating temperature up to 150°C. Ideal for applications requiring stable voltage regulation in compact spaces, such as IoT devices or portable electronics.
NCP5662DS33R4G
NCP5662DS33R4G by Onsemi is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 2A max output current, and 1.3V max dropout voltage. It is ideal for applications requiring stable voltage regulation in a compact package with surface mount capability.
NCP5663DS15R4G
NCP5663DS15R4G by Onsemi is a fixed positive single output LDO regulator with 1.5V nominal output voltage, 3A max output current, and 1.3V max dropout voltage. It is ideal for applications requiring stable voltage regulation in a compact package, such as consumer electronics and industrial control systems.
NCP553SQ33T1G
NCP553SQ33T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.08A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline, thin profile, ideal for surface mount assembly with a terminal pitch of 1.3mm.
NCP512SQ50T2G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 3 %;
NCP551SN50T1G
NCP551SN50T1G by Onsemi is a 5V fixed positive single output LDO regulator with a max dropout voltage of 0.15V and max output current of 0.15A. It operates in temperatures ranging from -40 to 85°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
NCP5501DT50RKG
NCP5501DT50RKG by Onsemi is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.5A max output current. It operates b/w -40 to 85°C, suitable for applications requiring stable voltage regulation in compact spaces. The package style is small outline with a matte tin terminal finish, making it ideal for surface mount designs.
NCP5500DT33RKG
NCP5500DT33RKG by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.5A. It features a small outline package style, matte tin terminal finish, and operates within an extended temperature range from -40°C to 150°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
NCP500SN33T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 2.5 %;
NCP502SN33T1G
NCP502SN33T1G by Onsemi is a 3.3V fixed positive single output LDO regulator with a max dropout voltage of 1.2V and max output current of 0.08A. It operates b/w -40 to 85°C, making it suitable for various applications requiring stable voltage regulation in compact spaces like consumer electronics and IoT devices.
NCP565D2T12G
NCP565D2T12G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1.5A and an operating temperature range from -40°C to 150°C. It has a small outline package style, making it suitable for applications requiring precise voltage regulation in limited space environments.
NCP551SN30T1G
NCP551SN30T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3V and max dropout voltage of 0.15V. It operates in temperatures ranging from -40 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
NCP59301DS50R4G
NCP59301DS50R4G by Onsemi is a fixed positive single output LDO regulator with 5V nominal output voltage, 3A max output current, and 0.5V max dropout voltage. Ideal for applications requiring stable voltage regulation in a compact package with high efficiency and low dropout characteristics.
NCP565D2T33R4G
NCP565D2T33R4G by Onsemi is a Fixed Positive Single Output LDO Regulator with 3.3V Nominal Output Voltage, 1.5A Max Output Current, and 1.3V Max Dropout Voltage suitable for various applications requiring stable voltage regulation in compact electronic devices.
NCP584HSN18T1G
NCP584HSN18T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 1.8V and max output current of 0.25A. It operates in an extended temperature range from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline, low profile, shrink pitch, ideal for space-constrained PCB layouts.
NCP565ST12T3G
NCP565ST12T3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1.5A and an operating temperature range from -40°C to 150°C. It has a small outline package style, making it suitable for applications requiring precise voltage regulation in compact spaces.
NCP5501DT33G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 18 V; Maximum Voltage Tolerance: 4.9 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved