Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LT1963AES8-1.8#PBF by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 1.8V and max output current of 1.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
Median Price
$7.180
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$3.110
100+ parts
$3.050
1k+ parts
$3.040
10k+ parts
-
DigiKey
$7.010
$4.563
$4.121
Mouser Electronics
$4.640
$4.210
Newark
$7.220
$4.700
$4.360
Analog Devices Inc
$7.740
$3.745
$2.980
Farnell
$8.210
$4.910
$4.280
Element14
$12.920
$6.250
$5.420
Verical
$3.204
Arrow
$3.604
Digiode
$2.954
Nova Conductors
$3.525
Bristol Electronics
$5.472
$2.736
Chip Stock
Vyrian
Anansix
Sensible Micro Corp
Odi Ramu Company
Prism Electronics
Cyclops Electronics Ltd
Semtec, LLC
LWI Electronics Inc
Advanced Electronics
$0.924
$0.841
$0.758
Ampacity Inc.
$2.210
Semicontronic
$2.155
$2.144
Corphita
$2.799
Argo Parts USA
$3.523
Netroflash
$3.349
$3.278
Parana Technologies
$4.669
$4.342
IDEA Electronic Components Group
$5.020
$4.769
Continental Prestige Electronics
$5.540
$4.070
$2.930
Vigor
$5.730
MARBEL Systems
$6.474
Corohmni
$6.517
Aztec Data Supply Inc.
$6.699
Texas Native Microelectronics
$7.441
$7.143
$6.920
$6.548
DigiPath Technology Company
$7.831
$7.518
Kenton Components
$8.929
$7.858
Qasali Group International
$20.091
$18.684
$17.680
Authorized Procurement Solutions
Perfect Parts
Lixinc
Futuretech Components
This material is lightweight and durable, making the product suitable for various applications while ensuring long-term reliability.
With a low dropout voltage, this regulator can ensure stable output voltage even when input voltage is close to the output voltage, enhancing overall performance.
Being surface mountable enables easy and space-efficient PCB assembly, making it ideal for compact designs.
The high operating temperature range allows for reliable operation in various environments, increasing versatility of the product.
This fixed output voltage is commonly used in many electronic devices, making it a versatile choice for different applications.
With a high maximum output current, this regulator can power a wide range of components, making it suitable for various high-power applications.
Fixed Regulators - Positive Single Output LDO LT1963AES8-1.8#PBF attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Analog Devices
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
LT1963AES8-1.8#PBF Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
Weitronic Enterprise
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
261
Deltrol Controls
Other Relays;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bytesonic Electronics
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Bkc Semiconductors
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
LM2936M-3.3/NOPB
LM2936M-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.05A max output current, and 60V max input voltage. Ideal for applications requiring low dropout voltage and precise regulation in compact designs.
MIC37100-3.3WS
Micrel
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 2 %;
LT3010EMS8E-5#TR
Analog Devices
Analog Devices' LT3010EMS8E-5#TR is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.55V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style includes a small outline, heat sink/slug, thin profile, and shrink pitch design for efficient surface mounting.
PTLV75733PDRVR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR;
LT1963AEQ-3.3#TRPBF
Analog Devices' LT1963AEQ-3.3#TRPBF is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.5A. It features a small outline package style, matte tin terminal finish, and operates within an extended temperature range from -40°C to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
MCP1702T-5002E/MB
MCP1702T-5002E/MB by Microchip Technology is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.25A Max Output Current, and 2% Max Voltage Tolerance. It is ideal for applications requiring stable voltage regulation in compact spaces, such as portable electronic devices or IoT sensors.
TPS7B6950QDCYRQ1
TPS7B6950QDCYRQ1 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.8V, suitable for applications requiring stable voltage regulation in automotive environments. It features a small outline package style, matte tin terminal finish, and can handle an output current of up to 150mA efficiently.
TPS77018DBVR
TPS77018DBVR by Texas Instruments is a fixed positive single output LDO regulator with an output voltage of 1.8V and max current of 50mA. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. The package style is small outline, low profile, shrink pitch, ideal for space-constrained designs.
LM1117IDTX-3.3/NOPB
LM1117IDTX-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.4 V. It is commonly used in applications requiring stable voltage regulation, such as power supplies for microcontrollers or low-power devices.
MCP1703T-3302E/MB
MCP1703T-3302E/MB by Microchip is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.25A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and surface mount capability, it offers efficient performance with minimal footprint.
AP2204K-3.3TRG1
Diodes Inc.'s AP2204K-3.3TRG1 is a 3.3V fixed positive single output LDO regulator with a max dropout voltage of 0.5V, ideal for applications requiring stable voltage supply in compact spaces. With a max output current of 0.15A and operating temperature range from -40°C to 125°C, it offers reliable performance in various electronic devices. The small outline package style and surface mount capability make it suitable for space-constrained designs where precise voltage regulation is essential.
TPS78233DDCT
TPS78233DDCT by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max dropout voltage of 0.25V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
TPS7A1633QDGNRQ1
TPS7A1633QDGNRQ1 by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.5V max dropout voltage, and 0.1A max output current. It is ideal for applications requiring stable voltage regulation in automotive electronics, offering AEC-Q100 screening and operating temperature range of -40 to 125°C.
TPS73733DRVR
TPS73733DRVR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and surface mount capability, this regulator is ideal for space-constrained designs that demand high performance and reliability.
LP2950CDTX-5.0/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2.4 %;
LM2936M-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 3 %;
LT1121CST-5#PBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 3 %;
LM3480IM3-12/NOPB
LM3480IM3-12/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 12V and max dropout voltage of 1.2V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With surface mount capability and small outline package style, it offers efficient performance in limited footprint designs.
LM2936M-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 0.05 A and a dropout voltage of 0.4 V. It is commonly used in applications requiring stable voltage regulation, such as power supplies for electronic devices.
LT1086CM-3.3#PBF
LT1086CM-3.3#PBF by Analog Devices is a Fixed Positive Single Output LDO Regulator with 1.5 A max output current, 3.3 V nominal output voltage, and 2% max voltage tolerance. Ideal for applications requiring stable power supply in a compact form factor, such as consumer electronics and industrial control systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
LT1963AEST-3.3#PBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3 %;
Analog Devices' LT1963AEST-3.3#PBF is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.5A. It features a small outline package style, matte tin terminal finish, and operates within a temperature range of -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LT1963AEQ-3.3#PBF
LT1963AEQ-3.3#PBF by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 3.3 V and max output current of 1.5 A. It has a small outline package style, operates in temperatures ranging from -40 to 125 °C, and is suitable for applications requiring precise voltage regulation in electronic circuits.
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3 %;
LT1963EST-3.3#PBF
LT1963EST-3.3#PBF by Linear Technology is a fixed positive single output LDO regulator with a max output current of 1.5 A and a dropout voltage of 0.55 V. It is commonly used in applications requiring stable voltage regulation, such as power supplies and battery-powered devices.
LT1963EST-3.3#PBF by Analog Devices is a fixed positive single output LDO regulator with 1.5A max output current, 3% voltage tolerance, and 0.01% line regulation. Ideal for applications requiring stable 3.3V output voltage in compact designs with surface mount technology.
LT1962EMS8-5#PBF
LT1962EMS8-5#PBF by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.43V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a max output current of 0.3A and small outline package style, it is ideal for space-constrained designs that demand efficient power management solutions.
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2.5 %;
LT1963AES8-3.3#PBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3 %;
Analog Devices' LT1963AES8-3.3#PBF is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.5A, suitable for applications requiring stable power supply such as in automotive electronics or industrial control systems. It features low dropout voltage of 0.34V, high line and load regulation at 0.01% and 0.035% respectively, making it ideal for compact designs with limited space constraints.
LT1962EMS8-3.3#PBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2.43 %;
LT1962EMS8-3.3#PBF by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.3A. It operates in an input voltage range of 3.8V to 20V, making it suitable for various applications requiring stable power supply such as IoT devices and portable electronics.
LT1963AES8-1.8#PBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3.5 %;
LT1963AEQ-2.5#PBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3.5 %;
LT1963AEQ-1.5#PBF
Analog Devices' LT1963AEQ-1.5#PBF is a fixed positive single output LDO regulator with a nominal output voltage of 1.5V and max output current of 1.5A, suitable for applications requiring stable voltage regulation in compact spaces. With a small outline package style and surface mount capability, it offers low dropout voltage of 0.34V and high load regulation precision of 0.018%.
LT1963AEST-3.3#TRPBF
Analog Devices' LT1963AEST-3.3#TRPBF is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.5A. It features a small outline package style, matte tin terminal finish, and operates within an extended temperature range from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LT1963AES8-1.8#TR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved