Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP4586DMU28TCG by Onsemi is a Fixed Positive Single Output LDO Regulator with 2.8V Nominal Output Voltage, 0.15A Max Output Current, and 1.5% Max Voltage Tolerance. It is ideal for applications requiring low dropout voltage and operates in temperatures up to 150 °C.
Median Price
$0.343
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$0.285
10k+ parts
$0.254
Farnell
$0.277
Verical
$0.386
$0.318
Digiode
$0.268
Vyrian
Corphita
Corohmni
AZTECH Wire
$9.180
Continental Prestige Electronics
$0.239
Perfect Parts
Kepictronics
Cyclops Electronics Ltd (Excess)
TANS Electronics
Problanco Electronics
SupplyDigital Components
Kulean Microsystems
UHIMA Technologies
Microchip USA
This material provides good durability and can withstand various environmental conditions, making the product reliable for long-term use.
The low dropout voltage allows for efficient regulation of output voltage even when the input voltage is slightly lower, ensuring stable performance.
Being surface mountable makes the installation process easier and allows for space-saving on the PCB, ideal for compact designs.
The wide operating temperature range ensures that the regulator can perform reliably in various temperature conditions, improving its versatility.
CMOS technology offers low power consumption and high efficiency, making the regulator suitable for battery-powered applications where power efficiency is crucial.
The square shape of the package allows for easy integration into the PCB layout and provides a stable mounting surface, enhancing overall reliability.
The minimum output voltage ensures that the regulator can provide a stable output even at low voltage levels, catering to a wide range of applications.
The tight voltage tolerance ensures precise regulation of the output voltage, which is crucial for sensitive electronic components, making it a reliable choice.
The nominal output voltage provides a standard reference for the regulator's output, ensuring compatibility with various components and systems.
Having four terminals simplifies the connection process and allows for better stability, reducing the chances of errors during installation.
This package style offers a compact design with efficient heat dissipation capabilities, making it suitable for space-constrained and heat-sensitive applications.
The small terminal pitch allows for high-density PCB designs, accommodating multiple regulators in a limited space without compromising on performance.
The LDO regulator type ensures a stable and accurate output voltage, making it ideal for applications that require precision voltage regulation.
The matte tin finish provides good conductivity and corrosion resistance, ensuring reliable connections and extended product lifespan.
The dual terminal position allows for flexibility in mounting options and improves overall stability, making it easier to integrate into different configurations.
The maximum output voltage ensures that the regulator can deliver the required voltage level even under varying operating conditions, enhancing compatibility.
The low seated height makes the regulator suitable for slim and compact designs, ensuring easy integration into space-constrained applications.
The narrow width allows for efficient placement on the PCB and facilitates compact designs, making it a suitable choice for applications with limited space.
The low minimum input voltage requirement allows the regulator to operate effectively with a wide range of power sources, enhancing versatility.
The maximum output current rating ensures that the regulator can deliver sufficient power to connected components without overloading, ensuring reliable operation.
The short length makes the regulator compact and easy to integrate into tight spaces, making it a suitable choice for applications with strict size constraints.
The high maximum input voltage rating allows the regulator to handle a wide range of input voltages, providing flexibility and compatibility with various power sources.
Fixed Regulators - Positive Single Output LDO NCP4586DMU28TCG attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Onsemi
Maximum Dropout Voltage-1:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Operating Temperature (TJ-Max):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
NCP4586DMU28TCG Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Device EOL 10/Jul/2017
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Standard
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
Changzhou Starsea Electronics
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
TPS7A1633DGNR
Texas Instruments
TPS7A1633DGNR by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.1A max output current, and 2% voltage tolerance. It operates b/w -40 to 125°C making it suitable for various applications requiring stable low dropout voltage regulation in compact designs.
LP5951MG-1.8/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 3.5 %;
LM1117MP-2.5/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;
AP2210K-3.3TRG1
Bcd Semiconductor Manufacturing
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Surface Mount: YES; Maximum Output Current-1: .3 A;
LM2936MX-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 3 %;
NCP1117DT33T5G
NCP1117DT33T5G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 3.3V. It has a small outline package style, making it suitable for applications requiring precise voltage regulation in limited space environments such as portable electronic devices. The regulator operates within a wide temperature range from -55°C to 150°C, ensuring reliable performance in various operating conditions.
LM2937ESX-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 4.8 %;
LM1086CSX-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 27 V; Maximum Voltage Tolerance: 2 %;
ADP7118ARDZ-3.3
Analog Devices
ADP7118ARDZ-3.3 by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.2A. It has a small outline package style, operates in temperatures ranging from -40 to 125°C, and is suitable for applications requiring precise voltage regulation in compact electronic devices.
LT1764EQ-3.3#PBF
LT1764EQ-3.3#PBF by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 3A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
LM2940T-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE;
LM2936HVMA-5.0
LM2936HVMA-5.0 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.4V, suitable for applications requiring stable voltage supply in a compact package. It operates within a wide temperature range from -40°C to 150°C, making it ideal for various electronic devices where precise voltage regulation is crucial.
LT1963AEST-3.3#PBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3 %;
TPS71733DCKTG4
TPS71733DCKTG4 by Texas Instruments is a BICMOS technology LDO regulator with 3.3V output voltage, 0.15A max current, and 0.3V dropout voltage. Ideal for applications requiring stable power supply in compact spaces due to its small outline package style and surface mount capability.
MCP1700T-3002E/TT
Microchip Technology
MCP1700T-3002E/TT by Microchip is a fixed positive single output LDO regulator with 3V nominal output voltage and 0.25A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
LM1085IS-12/NOPB
LM1085IS-12/NOPB by Texas Instruments is a 12V fixed positive single output LDO regulator with 3A max output current. It features a max dropout voltage of 1.5V, operating temperature range of -40 to 125°C, and surface mount capability. Ideal for applications requiring stable voltage regulation in compact spaces.
LM1117DT-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;
MIC2920A-3.3WS-TR
MIC2920A-3.3WS-TR by Microchip is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.4A max output current. It features a small outline package, matte tin terminal finish, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
NCP115ASN330T2G
NCP115ASN330T2G by Onsemi is a Fixed Positive Single Output LDO Regulator with a Nominal Output Voltage of 3.3V and Max Output Current of 0.3A. It operates in an Operating Temperature range from -40°C to 85°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is Small Outline, Thin Profile, with Surface Mount capability for easy integration into electronic designs.
TPS793333DBVR
TPS793333DBVR by Texas Instruments is a BICMOS technology LDO regulator with 3.3V output voltage, 0.2A max output current, and 0.18V dropout voltage. Ideal for applications requiring stable power supply in compact designs with input voltages ranging from 3.546V to 5.5V at temperatures b/w -40°C to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP4625HSN33T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 12 V; Maximum Voltage Tolerance: 1 %;
NCP4589DSN33T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Terminal Finish: Tin (Sn);
NCP4625HSN50T1G
NCP4589DSN30T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Maximum Dropout Voltage-1: .35 V;
NCP4587DSN28T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Nominal Dropout Voltage-1: .12 V;
NCP4587DSN30T1G
NCP4587DSN30T1G by Onsemi is a CMOS LDO regulator with 3V output voltage, 0.18V dropout voltage, and 0.15A output current. Ideal for applications requiring low-profile surface mount regulators in compact electronic devices.
NCP4587DSN33T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Terminal Position: DUAL;
NCP4620DSN15T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.7 %; Package Body Material: PLASTIC/EPOXY;
NCP4625DSN12T1G
NCP4625DSN12T1G by Onsemi is a Fixed Positive Single Output LDO Regulator with 1.2V Nominal Output Voltage, 0.3A Max Output Current, and 1.8V Max Dropout Voltage. It is ideal for applications requiring stable voltage regulation in compact electronic devices due to its small outline package style and low load regulation of 0.07%.
NCP4625HSN30T1G
NCP4682DSN30T1G
NCP4682DSN30T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3V and max dropout voltage of 0.32V. It operates in temperatures ranging from -40 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
NCP4681DMX35TCG
NCP4681DMX35TCG by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.5V and max dropout voltage of 0.35V, suitable for applications requiring stable voltage regulation in compact spaces. Operating temperature ranges from -40 to 150°C, making it versatile for various electronic devices needing efficient power management. With surface mount capability and small outline package style, this regulator offers reliable performance with minimal footprint in electronic designs.
NCP4687DSN18T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 3.1 %; Minimum Input Voltage: 2.8 V;
NCP4589DSQ12T1G
NCP4589DSQ12T1G by Onsemi is a CMOS LDO regulator with 0.7V dropout voltage, 1.2V output, and 0.3A current capacity. Ideal for applications requiring stable low-voltage power supply in compact designs due to its small outline package and wide operating temperature range of -40°C to 150°C.
NCP4641H050T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSOF; Terminal Form: FLAT; Maximum Input Voltage Absolute: 50 V; Maximum Voltage Tolerance: 2 %;
NCP4683DSQ33T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 3 %; Package Style (Meter): SMALL OUTLINE;
NCP4632DDT33T5G
NCP4632DDT33T5G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 3A. It has a small outline package style, Gull Wing terminal form, and operates in temperatures ranging from -40 to 85°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
NCP4569DM28R2
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Technology: CMOS;
NCP4555SN1.8T1
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Width: 1.65 mm;
NCP4569DM30R2
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved