Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP4589DSN33T1G by Onsemi is a Fixed Positive Single Output LDO Regulator with 3.3V Nominal Output Voltage, 0.35V Max Dropout Voltage, and 0.3A Max Output Current. It is ideal for applications requiring stable voltage regulation in compact electronic devices due to its small outline package style and low profile design.
Median Price
$0.351
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Farnell
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Nova Conductors
$0.345
Chip Stock
Vyrian
Digiode
Corohmni
$0.338
Vigor
$0.340
Netroflash
Argo Parts USA
$0.334
Ampacity Inc.
$0.650
Aztec Data Supply Inc.
$4.700
AZTECH Wire
$14.756
Perfect Parts
GreenTree Electronics
Kulean Microsystems
TANS Electronics
Kepictronics
SupplyDigital Components
Problanco Electronics
Corphita
UHIMA Technologies
Continental Prestige Electronics
$0.303
Microchip USA
This material provides durability and reliability to the product.
Low dropout voltage ensures efficient power conversion and minimal power loss.
Enables easy and convenient installation on a PCB, saving space and time.
Wide operating temperature range allows the product to function in various environments.
CMOS technology enables low power consumption and high efficiency.
Rectangular shape offers ease of integration into electronic devices.
Gull wing terminals facilitate secure and reliable connections on the PCB.
Wide operating temperature range ensures product reliability in extreme cold conditions.
Stable output voltage ensures consistent performance of connected components.
High voltage tolerance ensures accurate output voltage regulation.
Standard output voltage suitable for a wide range of applications.
Sufficient number of terminals for easy and secure connections.
Compact and space-saving design for efficient PCB layout.
Close terminal pitch allows for high-density PCB designs.
Stable fixed output voltage regulation for consistent performance.
Tin finish provides corrosion resistance and ensures reliable electrical connections.
Dual terminal position offers flexibility in PCB layout.
Maximum output voltage ensures compatibility with various components.
Low profile design for space-constrained applications.
Compact width for efficient PCB layout and space-saving.
Precise load regulation ensures stable output voltage under varying load conditions.
Low minimum input voltage requirement for compatibility with various power sources.
High output current capability for powering multiple components.
Compact length for space-efficient PCB layout.
High input voltage tolerance for compatibility with various power sources.
Fixed Regulators - Positive Single Output LDO NCP4589DSN33T1G attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Onsemi
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
NCP4589DSN33T1G Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Devices EOL 26/Jul/2018
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
National Semiconductor
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
Laube Technology
Fairchild Semiconductor
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ17P6X
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
Bourns
Frontier Electronics
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
LP2954IT/NOPB
LP2954IT/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.25A max output current. It offers a dropout voltage of 0.8V, line regulation of 0.02%, and load regulation of 0.015%. Ideal for applications requiring stable voltage supply in temperature range from -40°C to 125°C.
TPS76333DBVT
TPS76333DBVT by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.15A. It has a small outline, low profile package style and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
LP2985AIM5X-3.3/NOPB
LP2985AIM5X-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.15A max output current, and 16V max input voltage. It is used in applications requiring low dropout voltage, such as portable devices and battery-powered systems.
LP2985AIM5-1.8/NOPB
LP2985AIM5-1.8/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 1.8V nominal output voltage and 0.15A max output current. It has a small outline, low profile package style suitable for surface mount applications in various electronic devices operating within -40 to 125°C temperature range.
MC33275DT-3.0G
MC33275DT-3.0G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.3A and a dropout voltage of 0.5V. It is commonly used in applications that require stable voltage regulation, such as power supplies and battery-powered devices.
LM2940IMP-5.0
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 5 %;
TLV75518PDBVR
TLV75518PDBVR by Texas Instruments is a fixed positive single output LDO regulator with a maximum dropout voltage of 0.4V and an operating temperature range from -40 to 125 °C. It has a nominal output voltage of 1.8V and can handle a maximum output current of 0.5A. Its small package size and high voltage tolerance make it suitable for various applications.
LM2931AMX-5.0/NOPB
LM2931AMX-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LP2992AIM5-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 4.5 %;
LM2936MM-3.3/NOPB
LM2936MM-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max dropout voltage of 0.4V and an operating temperature range of -40°C to 150°C. It is commonly used in applications requiring a stable 3.3V output voltage, such as power supplies for microcontrollers or sensors.
LF33ABDT-TR
STMicroelectronics LF33ABDT-TR is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.5A max output current. It has a small outline package style, operates at -40 to 125 °C, and is ideal for applications requiring low dropout voltage and precise voltage regulation.
LM2936DTX-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 3 %;
LM1117MPX-2.5/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;
TPS793333DBVRQ1
TPS793333DBVRQ1 by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.2A max output current. It has a small outline package style, operates in temperatures ranging from -40 to 125°C, and is suitable for automotive applications due to AEC-Q100 screening level compliance.
MCP1700T-3002E/TT
Microchip Technology
MCP1700T-3002E/TT by Microchip is a fixed positive single output LDO regulator with 3V nominal output voltage and 0.25A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
LM3940IMP-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 7.5 V; Maximum Voltage Tolerance: 5.2 %;
LM3940ISX-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 7.5 V; Maximum Voltage Tolerance: 5.2 %;
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 3.5 %;
MIC5239-3.3YS
Micrel
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 32 V; Maximum Voltage Tolerance: 2 %;
LD1117DT33C
LD1117DT33C by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.8A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP4625HSN33T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 12 V; Maximum Voltage Tolerance: 1 %;
NCP4625HSN50T1G
NCP4589DSN30T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Maximum Dropout Voltage-1: .35 V;
NCP4587DSN28T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Nominal Dropout Voltage-1: .12 V;
NCP4587DSN30T1G
NCP4587DSN30T1G by Onsemi is a CMOS LDO regulator with 3V output voltage, 0.18V dropout voltage, and 0.15A output current. Ideal for applications requiring low-profile surface mount regulators in compact electronic devices.
NCP4587DSN33T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Terminal Position: DUAL;
NCP4620DSN15T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.7 %; Package Body Material: PLASTIC/EPOXY;
NCP4625DSN12T1G
NCP4625DSN12T1G by Onsemi is a Fixed Positive Single Output LDO Regulator with 1.2V Nominal Output Voltage, 0.3A Max Output Current, and 1.8V Max Dropout Voltage. It is ideal for applications requiring stable voltage regulation in compact electronic devices due to its small outline package style and low load regulation of 0.07%.
NCP4625HSN30T1G
NCP4682DSN30T1G
NCP4682DSN30T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3V and max dropout voltage of 0.32V. It operates in temperatures ranging from -40 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
NCP4681DMX35TCG
NCP4681DMX35TCG by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.5V and max dropout voltage of 0.35V, suitable for applications requiring stable voltage regulation in compact spaces. Operating temperature ranges from -40 to 150°C, making it versatile for various electronic devices needing efficient power management. With surface mount capability and small outline package style, this regulator offers reliable performance with minimal footprint in electronic designs.
NCP4687DSN18T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 3.1 %; Minimum Input Voltage: 2.8 V;
NCP4589DSQ12T1G
NCP4589DSQ12T1G by Onsemi is a CMOS LDO regulator with 0.7V dropout voltage, 1.2V output, and 0.3A current capacity. Ideal for applications requiring stable low-voltage power supply in compact designs due to its small outline package and wide operating temperature range of -40°C to 150°C.
NCP4641H050T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSOF; Terminal Form: FLAT; Maximum Input Voltage Absolute: 50 V; Maximum Voltage Tolerance: 2 %;
NCP4683DSQ33T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 3 %; Package Style (Meter): SMALL OUTLINE;
NCP4632DDT33T5G
NCP4632DDT33T5G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 3A. It has a small outline package style, Gull Wing terminal form, and operates in temperatures ranging from -40 to 85°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
NCP4569DM28R2
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Technology: CMOS;
NCP4555SN1.8T1
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Width: 1.65 mm;
NCP4569DM30R2
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved