Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP4620DSN15T1G by Onsemi is a CMOS LDO regulator with 1.5V output voltage, 0.15A output current, and 1.1V dropout voltage. Ideal for applications requiring stable low-voltage power supplies in compact designs due to its small outline package and low profile design.
Median Price
$0.385
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.371
1k+ parts
$0.308
10k+ parts
$0.275
DigiKey
$0.460
Verical
$0.344
Digiode
$0.288
Nova Conductors
$0.294
Bristol Electronics
$1.140
$0.422
$0.319
Chip Stock
Vyrian
Dan-Mar Components
Ampacity Inc.
$0.258
Corphita
$0.273
Corohmni
$0.283
Vigor
$0.290
Argo Parts USA
$0.285
Continental Prestige Electronics
$0.257
Problanco Electronics
TANS Electronics
Perfect Parts
Microchip USA
Kulean Microsystems
UHIMA Technologies
Netroflash
$0.280
$0.274
SupplyDigital Components
Plastic/Epoxy material makes the package lightweight and durable, suitable for a wide range of applications.
Low dropout voltage ensures efficient power conversion and minimal power loss.
Surface mount capability allows for easy and convenient installation on PCBs.
High operating temperature range provides flexibility and reliability in various environmental conditions.
CMOS technology ensures low power consumption and high efficiency.
Rectangular shape enables space-efficient design and integration into compact devices.
Gull wing terminal form allows for easy soldering and connection in PCB assembly.
Stable minimum output voltage ensures consistent performance of the regulator.
Low voltage tolerance ensures accurate and precise output voltage regulation.
Stable nominal output voltage suitable for many low voltage applications.
5 terminals provide ample connectivity options for different circuit configurations.
Compact package style with low profile and shrink pitch saves space and allows for dense PCB layouts.
Narrow terminal pitch enables close component placement for high-density PCB designs.
Fixed positive output Low Dropout (LDO) regulator provides stable voltage regulation for sensitive components.
Tin terminal finish ensures good electrical conductivity and corrosion resistance.
Dual terminal position offers flexibility in circuit layout and connection options.
High maximum output voltage ensures compatibility with various applications requiring higher voltage levels.
Low seated height allows for compact and space-efficient PCB design.
Narrow width enables slim and compact module design for space-constrained applications.
High load regulation accuracy ensures stable output voltage under varying load conditions.
Low minimum input voltage requirement enables operation even with low input power sources.
High maximum output current capability supports power-hungry loads and applications.
Short length allows for compact and space-saving PCB designs.
Wide input voltage range supports versatile application scenarios and compatibility with different power sources.
Fixed Regulators - Positive Single Output LDO NCP4620DSN15T1G attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Onsemi
Maximum Dropout Voltage-1:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Operating Temperature (TJ-Max):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Regulator Type:
Maximum Seated Height:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
NCP4620DSN15T1G Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
Bytesonic Electronics
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
Taitron Components
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
ULN2803A
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
AZ1117CH-3.3TRG1
Diodes Incorporated
Diodes Incorporated's AZ1117CH-3.3TRG1 is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.8A. It operates in an extended temperature range from -20°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline with gull wing terminals, ideal for surface mount assembly in space-constrained electronic devices.
LT1129IST-5#PBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 3 %;
NCP694D33HT1G
Onsemi
NCP694D33HT1G by Onsemi is a Fixed Positive Single Output LDO Regulator with 3.3V Nominal Output Voltage, 0.3A Max Output Current, and 85°C Max Operating Temperature. It is ideal for applications requiring stable voltage regulation in compact spaces due to its small outline package style and low dropout voltage of 0.1V.
XC6220B331MR-G
Torex Semiconductor
XC6220B331MR-G by Torex Semiconductor is a 3.3V fixed positive single output LDO regulator with a max output current of 1A. Operating at an input voltage range of 1.6-6V, it features a low dropout voltage of 0.06V and load regulation of 0.045%. Ideal for applications requiring stable voltage supply in compact spaces due to its small outline package style and surface mount capability.
Bcd Semiconductor Manufacturing
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Maximum Seated Height: 1.8 mm;
LT1761ES5-3.3#PBF
Analog Devices
LT1761ES5-3.3#PBF by Analog Devices is a fixed positive single output LDO regulator with a max dropout voltage of 0.45V and an operating temperature range of -40°C to 125°C. It is commonly used in applications that require a stable and regulated output voltage of 3.3V, such as portable electronic devices or battery-powered systems.
LM2936DT-5.0/NOPB
LM2936DT-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage, 0.05A max output current, and 3% max voltage tolerance. Ideal for applications requiring stable voltage supply in compact spaces with operating temperatures ranging from -40 to 125°C.
LT1764EQ-3.3#PBF
LT1764EQ-3.3#PBF by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 3A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
NCP1117LPST50T3G
NCP1117LPST50T3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 5V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and gull wing terminal form, this regulator is ideal for surface mount designs where space is limited.
LP2985IM5-2.5/NOPB
LP2985IM5-2.5/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 2.5V nominal output voltage and 0.15A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LP2985AIM5-2.5/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 3.5 %;
LM7805
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 3 %; Surface Mount: NO; Technology: BIPOLAR;
LP2980AIM5-5.0/NOPB
LP2980AIM5-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.05A max output current. It has a small outline, low profile package style and operates b/w -40 to 125°C, making it ideal for applications requiring stable voltage regulation in compact spaces.
LP2981-33DBVRG4
LP2981-33DBVRG4 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It features a small outline, low profile package style and operates within an extended temperature range from -40°C to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
LP2951-50QDRQ1
LP2951-50QDRQ1 by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.1A max output current. It features a small outline package, Gull Wing terminal form, and operates at temperatures up to 150°C. Ideal for automotive applications requiring stable voltage regulation in compact designs.
LM2931T-5.0G
LM2931T-5.0G by Onsemi is a fixed positive single output LDO regulator with 5V nominal output voltage, 0.1A max output current, and 6V min input voltage. It has a max dropout voltage of 0.6V and operates in temperatures ranging from -40 to 125 °C. Ideal for applications requiring stable voltage regulation in electronic circuits.
LM2937IMP-3.3
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 4.8 %;
LM2937ES-3.3/NOPB
LM2937ES-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with an output voltage of 3.3V and max current of 0.5A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs. Its small outline package and surface mount capability enhance its versatility in electronic devices.
NCP114ASN330T1G
NCP114ASN330T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.3A. It operates in temperatures ranging from -40 to 85°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, thin profile, with surface mount capability for easy integration into electronic devices.
LT1764AEQ-1.5#PBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3.53 %;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP4625HSN33T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 12 V; Maximum Voltage Tolerance: 1 %;
NCP4589DSN33T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Terminal Finish: Tin (Sn);
NCP4625HSN50T1G
NCP4589DSN30T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Maximum Dropout Voltage-1: .35 V;
NCP4587DSN28T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Nominal Dropout Voltage-1: .12 V;
NCP4587DSN30T1G
NCP4587DSN30T1G by Onsemi is a CMOS LDO regulator with 3V output voltage, 0.18V dropout voltage, and 0.15A output current. Ideal for applications requiring low-profile surface mount regulators in compact electronic devices.
NCP4587DSN33T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Terminal Position: DUAL;
NCP4625DSN12T1G
NCP4625DSN12T1G by Onsemi is a Fixed Positive Single Output LDO Regulator with 1.2V Nominal Output Voltage, 0.3A Max Output Current, and 1.8V Max Dropout Voltage. It is ideal for applications requiring stable voltage regulation in compact electronic devices due to its small outline package style and low load regulation of 0.07%.
NCP4625HSN30T1G
NCP4682DSN30T1G
NCP4682DSN30T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3V and max dropout voltage of 0.32V. It operates in temperatures ranging from -40 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
NCP4681DMX35TCG
NCP4681DMX35TCG by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.5V and max dropout voltage of 0.35V, suitable for applications requiring stable voltage regulation in compact spaces. Operating temperature ranges from -40 to 150°C, making it versatile for various electronic devices needing efficient power management. With surface mount capability and small outline package style, this regulator offers reliable performance with minimal footprint in electronic designs.
NCP4687DSN18T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 3.1 %; Minimum Input Voltage: 2.8 V;
NCP4589DSQ12T1G
NCP4589DSQ12T1G by Onsemi is a CMOS LDO regulator with 0.7V dropout voltage, 1.2V output, and 0.3A current capacity. Ideal for applications requiring stable low-voltage power supply in compact designs due to its small outline package and wide operating temperature range of -40°C to 150°C.
NCP4641H050T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSOF; Terminal Form: FLAT; Maximum Input Voltage Absolute: 50 V; Maximum Voltage Tolerance: 2 %;
NCP4683DSQ33T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 3 %; Package Style (Meter): SMALL OUTLINE;
NCP4632DDT33T5G
NCP4632DDT33T5G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 3A. It has a small outline package style, Gull Wing terminal form, and operates in temperatures ranging from -40 to 85°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
NCP4569DM28R2
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Technology: CMOS;
NCP4555SN1.8T1
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Width: 1.65 mm;
NCP4569DM30R2
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved