Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MPS5172RLRA by Onsemi is a NPN BJT with hFE of 100, VCE of 25V, and IC of 0.1A. Ideal for low-power applications in electronics due to its small size and high reliability. The transistor's through-hole package makes it easy to integrate into circuit boards.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
TANS Electronics
Problanco Electronics
Kulean Microsystems
SupplyDigital Components
UHIMA Technologies
Corphita
Corohmni
This material provides durability and protection for the transistor, making it suitable for a variety of applications.
NPN transistors are commonly used for amplification and switching applications, making this product versatile and widely applicable.
A single configuration simplifies circuit design and reduces the complexity of the overall system.
The round shape allows for easy mounting and installation in various electronic devices.
Through-hole terminals provide a strong and reliable connection, ensuring stable performance in demanding environments.
Having 3 terminals allows for flexibility in circuit configurations and connections.
The cylindrical package style is compact and space-efficient, suitable for compact electronic designs.
A high minimum DC current gain ensures consistent and reliable amplification performance.
With a high maximum operating temperature, this transistor can withstand elevated temperatures without compromising performance.
The 25V maximum collector-emitter voltage allows for safe operation within specified voltage limits.
Silicon transistors offer high performance, low power consumption, and reliability, making them a popular choice in electronic circuits.
The 0.1A maximum collector current rating indicates the transistor's capability to handle current flow without overheating or damage.
The tin lead terminal finish ensures good solderability and electrical conductivity for secure connections.
The bottom terminal position allows for easy and convenient soldering onto circuit boards or mounting surfaces.
Small Signal Bipolar Junction Transistors (BJT) MPS5172RLRA attributes and parameters. Explore more Small Signal Bipolar Junction Transistors (BJT) devices from Onsemi
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Qualification:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Element Material:
MPS5172RLRA Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EU2B-YS3303C
Idec
ROTARY SWITCH;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Gec Plessey Semiconductors
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
MMBT3904
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .35 W; Package Body Material: PLASTIC/EPOXY;
BC807-25LT1G
BC807-25LT1G by Onsemi is a PNP BJT transistor with VCEsat of 0.7V, hFE of 160, and IC of 0.5A. Ideal for switching applications, it operates b/w -55 to 150 °C and has a max VCE of 45V. With a small outline package style and surface mount capability, it offers high performance in compact designs.
BC847C
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .1 A;
2N2907A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Minimum Operating Temperature: -55 Cel;
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): .4 W; Maximum Collector Current (IC): .6 A;
2N3906
Swampscott Electronics
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .2 A;
2N3904
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .2 A;
BC817-25
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): .33 W; Maximum Collector Current (IC): .5 A;
2N2219A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .8 W; Maximum Collector Current (IC): .8 A;
BC847BM,315
Nexperia
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .1 A; Maximum Operating Temperature: 150 Cel;
Samsung
BC817-40W-7
Diodes Incorporated
BC817-40W-7 by Diodes Inc. is a NPN BJT transistor with 170 min hFE, 45V VCEO, and 100MHz fT. Ideal for switching applications, it has a 0.2W power dissipation in a small outline package suitable for surface mount technology.
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
Vishay Semiconductors
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .8 A; Package Style (Meter): SMALL OUTLINE;
MMBT2907A
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Finish: TIN LEAD;
SMMBT2222ALT3G
SMMBT2222ALT3G by Onsemi is a NPN BJT transistor with 40V VCEO, 0.6A IC, and 300MHz fT. Ideal for small signal applications in electronics due to its high DC current gain of 75 (hFE), low power dissipation of 0.3W, and fast turn-on/off times of 35ns/285ns. Its Gull Wing terminals and compact rectangular package make it suitable for surface mount designs.
New England Semiconductor
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .6 A;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
MMBT3906-7-F
Diodes Inc. MMBT3906-7-F is a PNP BJT transistor with 3 terminals, max power dissipation of 0.3W, and max collector-emitter voltage of 40V. Ideal for switching applications in small outline packages, it operates b/w -55 to 150°C with a transition frequency of 250MHz.
BC846B,235
NXP Semiconductors
BC846B,235 by NXP Semiconductors is a NPN BJT transistor for switching applications. It has a max VCEsat of 0.6V and min hFE of 200. With a max operating temperature of 150°C, it can handle up to 0.1A collector current in a small outline package suitable for surface mount technology.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MPS5172RLRMG
MPS5172RLRMG by Onsemi is a NPN BJT with hFE of 100, VCE of 25V, and IC of 0.1A. Ideal for low-power applications in electronics due to its small size and high reliability. Suitable for use in various circuits requiring a single NPN transistor configuration.
MPS5172
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .1 A; Package Style (Meter): CYLINDRICAL;
MPS5172G
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .1 A; No. of Terminals: 3;
MPS5172RL
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .1 A; Minimum DC Current Gain (hFE): 100; Package Style (Meter): CYLINDRICAL;
MPS5172RL1
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .1 A; Additional Features: EUROPEAN PART NUMBER; Qualification: Not Qualified;
MPS5172RLRE
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .1 A; Package Shape: ROUND; JESD-30 Code: O-PBCY-T3;
MPS5172RLRM
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .1 A; Package Style (Meter): CYLINDRICAL; Package Body Material: PLASTIC/EPOXY;
MPS5172RLRP
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .1 A; Qualification: Not Qualified; Transistor Element Material: SILICON;
MPS5172ZL1
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .1 A; Terminal Form: THROUGH-HOLE; Package Shape: ROUND;
MPS5172-AMMO
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 120 MHz; Maximum Collector Current (IC): .1 A; Package Body Material: PLASTIC/EPOXY;
MPS5172-T/R
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 120 MHz; Maximum Collector Current (IC): .1 A; Minimum DC Current Gain (hFE): 100;
MPS5172-18R
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 120 MHz; JESD-30 Code: O-PBCY-T3; Minimum DC Current Gain (hFE): 100;
MPS5172-5T1
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 120 MHz; Terminal Finish: TIN LEAD; Terminal Position: BOTTOM;
MPS5172TRA
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 120 MHz; Maximum Collector-Base Capacitance: 10 pF; Package Style (Meter): CYLINDRICAL;
MPS5172TRD
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 120 MHz; JESD-609 Code: e0; No. of Terminals: 3;
MPS5172TRG
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 120 MHz; JEDEC-95 Code: TO-92; Terminal Position: BOTTOM;
MPS5172TRH
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 120 MHz; Package Style (Meter): CYLINDRICAL; Terminal Form: THROUGH-HOLE;
MPS5172APP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 120 MHz; Maximum Collector-Emitter Voltage: 25 V; No. of Elements: 1;
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .1 A; Maximum Operating Temperature: 150 Cel;
MPS5172APMLEADFREE
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 120 MHz; Package Shape: ROUND; Additional Features: LOW NOISE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved