Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi MOC223M is a single optocoupler with a Darlington output, featuring a max forward current of 0.06 A and an isolation voltage of 2500 V. With a min operating temperature of -40°C and mounting feature for surface mount applications, it is ideal for use in high-power electronic circuits requiring reliable signal isolation.
Median Price
$0.789
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.559
100+ parts
$0.509
1k+ parts
$0.458
10k+ parts
-
Farnell
$0.676
$0.342
$0.285
Newark
$0.902
$0.454
$0.357
$0.343
Mouser Electronics
$0.920
$0.463
Element14
$1.240
$0.533
$0.523
DigiKey
$0.280
Digiode
$0.211
Freelance Electronics
$0.274
Nova Conductors
$0.345
Chip Stock
IBS Electronics
$0.265
NAC Semi
$0.455
Bristol Electronics
ACDS - Activité Composants Distribution Service
Inventory MP
Flip Electronics
Vyrian
Sensible Micro Corp
North Shore Components
Prism Electronics
Resion
Ampacity Inc.
$0.082
Semicontronic
$0.080
Aztec Data Supply Inc.
$0.102
Corphita
$0.200
Corohmni
$0.222
Argo Parts USA
$0.335
Netroflash
$0.328
$0.321
Advanced Electronics
Component Stockers USA
$0.840
$0.360
Continental Prestige Electronics
$0.842
$0.312
$0.234
$0.219
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
Problanco Electronics
SupplyDigital Components
Cyclops Electronics Ltd (Excess)
Kepictronics
Glotronic Ltd.
Futuretech Components
Authorized Procurement Solutions
A-Z Elektronik GmbH
Supply Digital
Kulean Microsystems
TANS Electronics
Assy Fe
UHIMA Technologies
Robosynatics
$27.004
Lucentia Tech
Having a single configuration makes this optocoupler easy to use and integrate into a circuit.
With a maximum forward current of 0.06 A, this optocoupler is suitable for low power applications.
The Darlington output design provides high current transfer ratio and fast response times.
This optocoupler can operate efficiently even at high temperatures, ensuring reliability in various environments.
The wide temperature range at which this optocoupler operates allows for versatile use in different conditions.
The matte tin finish on the terminals ensures good solderability and connection stability.
With a low power dissipation of 0.15 W, this optocoupler helps in reducing energy consumption and heat generation.
The high minimum current transfer ratio ensures accurate and efficient signal transmission between the input and output.
The low maximum dark current helps in minimizing leakage currents and improving overall performance.
The high minimum collector-emitter breakdown voltage enhances the durability and safety of this optocoupler.
The high nominal current transfer ratio indicates strong amplification and signal integrity in the output stage.
The high maximum isolation voltage provides effective electrical insulation and protection in sensitive applications.
The surface mount design makes installation and PCB integration of this optocoupler convenient and space-efficient.
The low maximum forward voltage drop helps in minimizing power losses and improving overall efficiency.
The high maximum on-state current handling capability allows for safe operation in high current applications.
Optocoupler Transistor Outputs MOC223M attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Onsemi
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Minimum Current Transfer Ratio:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Sub-Category:
Terminal Finish:
MOC223M Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
NSN
5961-01-600-4731, 5961016004731
NIIN
016004731
PCN Design/Specification - Logo 17/Aug/2017
PCN Packaging - Mult Devices 24/Oct/2017
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM358M
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
Sangdest Microelectronics (Nanjing)
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
Changzhou Starsea Electronics
ERJ3GEY0R00V
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
SFH6916
Vishay Semiconductors
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); No. of Elements: 4; Minimum Collector-emitter Breakdown Voltage: 70 V; Additional Features: UL APPROVED; Maximum Forward Current: .05 A;
CNY17-3-300E
Broadcom
Broadcom's CNY17-3-300E is a SINGLE optocoupler with 0.06A forward current, 100% min. transfer ratio, and 5000V isolation voltage. Ideal for applications requiring high-speed response time and reliable electrical isolation in temperatures ranging from -55 to 100°C.
H11G1SR2VM
The Onsemi H11G1SR2VM is a single optocoupler with a Darlington output, ideal for applications requiring high isolation voltage of 7500V. It features a max forward current of 0.06A and min operating temperature of -40°C, making it suitable for use in various electronic circuits where reliable signal transmission is crucial. With a min current transfer ratio of 1000%, this surface-mount device offers efficient performance in demanding environments.
4N27
Qt Optoelectronics
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; No. of Elements: 1; Maximum Isolation Voltage: 5300 V; Maximum Forward Current: .08 A;
FOD817B3SD
Fairchild Semiconductor
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 110 Cel;
SFH6156-2-X001
Infineon Technologies
SFH6156-2-X001 by Infineon is a SINGLE optocoupler with 0.06A forward current, 70V breakdown voltage, and 5300V isolation. It operates b/w -55°C to 100°C. Ideal for applications requiring high voltage isolation and signal transmission in harsh environments.
PC357N7J000F
Sharp Corporation
Sharp Corporation's PC357N7J000F is a SINGLE optocoupler with max. forward current of 0.05A and min. collector-emitter breakdown voltage of 80V. With a nominal current transfer ratio of 200%, it operates b/w -30°C to 100°C, making it ideal for applications requiring high isolation voltage up to 3750V.
PS2501L-4-A
Nec Electronics
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Maximum Dark Current: 100 nA; Maximum Operating Temperature: 100 Cel; Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Isolation Voltage: 5000 V;
MOCD223R2M
MOCD223R2M by Onsemi is a 2-channel optocoupler with separate configuration. It features a max forward current of 0.06A, Darlington output type, and 1000% nominal current transfer ratio. Ideal for applications requiring high isolation voltage up to 2500V, such as in industrial control systems and power supplies.
TLP185(E(O
Toshiba
Toshiba's TLP185(E(O optocoupler features 0.05A max forward current, 110°C max operating temp, and 3750V max isolation voltage. Ideal for surface mount applications, with a min CTR of 50% and -55°C min operating temp.
CNY173M
CNY173M by Onsemi is a single optocoupler with max forward current of 0.06A, min transfer ratio of 100%, and max isolation voltage of 4170V. Ideal for applications requiring high-speed response times, such as industrial automation systems or power supply circuits.
TLP182(GB-TPL,E(T
Toshiba's TLP182(GB-TPL,E(T optocoupler has a max forward current of 0.05A, min operating temp of -55°C, and isolation voltage of 3750V. Ideal for AC input-transistor output applications requiring high current transfer ratio and surface mounting feature.
PS2811-1-F3-A
Nec Electronics America
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: MATTE TIN/TIN BISMUTH; Nominal Current Transfer Ratio: 200 %; Maximum Dark Current: 100 nA; Configuration: SINGLE; Maximum Isolation Voltage: 2500 V;
FOD817A
FOD817A by Onsemi is a single optocoupler with a max forward current of 0.05A and min CTR of 80%. It operates b/w -55°C to 110°C, has an isolation voltage of 5000V, and is ideal for applications requiring fast response times in through-hole mounting configurations.
Quality Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Minimum Collector-emitter Breakdown Voltage: 30 V; Maximum Isolation Voltage: 2500 V; Maximum Dark Current: 50 nA; Configuration: SINGLE; Additional Features: UL RECOGNIZED;
4N35
Everlight Electronics
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Isolation Voltage: 5000 V; Maximum Power Dissipation: .15 W;
TLP291(SE
Toshiba TLP291(SE optocoupler features 0.05A forward current, 80V breakdown voltage, and 3750V isolation voltage. Ideal for applications requiring high-voltage protection in a single configuration with a temperature range of -55 to 110°C.
SFH6156-3-X001T
SFH6156-3-X001T by Infineon is a SINGLE optocoupler with 0.06A forward current, 100% transfer ratio, and 5300V isolation voltage. Ideal for applications requiring high collector-emitter breakdown voltage of 70V in temperatures ranging from -55 to 100°C.
HCPL-181-00BE
Agilent Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Configuration: SINGLE; JESD-609 Code: e3; Maximum Forward Current: .05 A;
Isocom Components
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: TIN; Maximum Isolation Voltage: 5300 V; Configuration: SINGLE; No. of Elements: 1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MOC223R2M
The Onsemi MOC223R2M is a single optocoupler with a Darlington output, featuring a max forward current of 0.06A and min operating temperature of -40°C. With a min CTR of 500% and isolation voltage of 2500V, it's ideal for applications requiring high current transfer ratios and electrical isolation in temperatures ranging from -40°C to 100°C.
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Forward Voltage: 1.3 V; Minimum Operating Temperature: -40 Cel;
MOC223VM
Onsemi's MOC223VM is a single optocoupler with Darlington output, featuring max forward current of 0.06A and min operating temp of -40°C. Ideal for applications requiring high isolation voltage up to 2500V, such as in power supplies and industrial control systems.
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Current Transfer Ratio: 500 %; Minimum Collector-emitter Breakdown Voltage: 30 V; Maximum Forward Current: .06 A;
MOC223R2VM
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Forward Voltage: 1.3 V; Maximum Isolation Voltage: 2500 V;
MOC223R2VM by Onsemi is a single configuration optocoupler with a max forward current of 0.06A. It has a min operating temperature of -40°C and a max operating temperature of 100°C. This optocoupler is commonly used in applications requiring high isolation voltage and surface mounting feature.
MOC223M
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Voltage: 1.3 V; Maximum Operating Temperature: 100 Cel; Maximum Dark Current: 50 nA;
MOC207R2M
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Minimum Current Transfer Ratio: 100 %; Maximum Forward Current: .06 A;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Current Transfer Ratio: 100 %; Additional Features: UL RECOGNIZED; Maximum Isolation Voltage: 2500 V;
MOC217R2M
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Power Dissipation: .15 W; Minimum Operating Temperature: -40 Cel; Maximum Dark Current: 50 nA;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum On State Current: .15 A; Minimum Current Transfer Ratio: 100 %; Minimum Collector-emitter Breakdown Voltage: 30 V;
MOC207M
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 2500 V; Additional Features: UL RECOGNIZED; JESD-609 Code: e3;
Onsemi's MOC207M is a single optocoupler with max forward current of 0.06A and min transfer ratio of 100%. Ideal for applications requiring high isolation voltage up to 2500V, surface mounting feature, and operating temperatures from -40°C to 100°C.
MOC207VM
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Minimum Current Transfer Ratio: 100 %; Minimum Collector-emitter Breakdown Voltage: 70 V;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Forward Voltage: 1.5 V; Configuration: SINGLE; No. of Elements: 1;
MOC207MR2
Fairchild Semiconductor's MOC207MR2 is a Transistor Output Optocoupler with 0.06A max forward current, 100% min current transfer ratio, and 2500V max isolation voltage. Ideal for applications requiring surface mounting feature in temperatures ranging from -40°C to 100°C.
MOC217M
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Maximum Power Dissipation: .15 W; Maximum Dark Current: 50 nA;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Forward Current: .06 A; Maximum On State Current: .15 A; Maximum Power Dissipation: .15 W;
MOC207
TRANSISTOR OUTPUT OPTOCOUPLER; Configuration: SINGLE; Maximum Forward Current: .06 A; Maximum Isolation Voltage: 2500 V; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 70 V;
MOC223R1
Motorola
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Response Time: .0000035 s; Nominal Current Transfer Ratio: 1000 %; Configuration: SINGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved