Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Maximum Operating Temperature: 100 Cel; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 80 V; Configuration: SINGLE;
Median Price
$0.655
Lifecycle Status
Suppliers In-Stock
36
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.096
100+ parts
$0.091
1k+ parts
10k+ parts
-
Mouser Electronics
$0.840
$0.425
$0.317
$0.282
DigiKey
$0.850
$0.436
$0.342
$0.288
Renesas
$1.000
$0.414
$0.312
$0.260
Verical
$0.470
$0.377
Future Electronics
$0.290
$0.280
$0.265
Nova Conductors
$0.311
Component Electronics Inc.
$1.540
$1.150
Vyrian
Bristol Electronics
Atlantic Semiconductor
IBS Electronics
$0.380
$0.367
QIE Inc.
Chip Stock
Semtec, LLC
NAC Semi
$0.446
Classic Components Corporation
PAR Electronics
BCID Electronics Ltd.
Speed Components Ltd
Prism Electronics
A&K Electronics
Semi Source
ACDS - Activité Composants Distribution Service
Inventory MP
Florida Circuit
PC Components Company LLC
Connector Distribution Corp
Right Parts Inc.
HZD GmbH
Cogito LLC
LWI Electronics Inc
Resion
Elcom Components
J & M Industries LLC
Sensible Micro Corp
Ampacity Inc.
$0.082
Advanced Electronics
Argo Parts USA
$0.299
Continental Prestige Electronics
$0.293
Aztec Data Supply Inc.
$0.538
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
Authorized Procurement Solutions
Infinite Electronics LLP (Excess)
Metaverse IC Inc.
Kepictronics
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
GreenTree Electronics
Netroflash
$0.304
$0.295
$0.289
ChipTracer
Speed Components Ltd (Excess)
Optocoupler Transistor Outputs PS2501L-1-A attributes and parameters. Explore more Optocoupler Transistor Outputs devices from California Eastern Laboratories
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Isolation Voltage:
JESD-609 Code:
No. of Elements:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Terminal Finish:
PS2501L-1-A Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
PCN Assembly/Origin - Mult Dev Wafer Fab Chg 21/Dec/2018
PCN Packaging - Label Change-All Devices 01/Dec/2022
60+ Years of RF/Wireless experience. For over 6 decades, California Eastern Laboratories has been providing world class wireless and optical products, with specialized support, to OEMs needing wireless communication. Built around the customer, CEL provides extensive technical support to assist customers in adding connectivity to their products; this includes: Detailed documentation Device testing Evaluation boards Software and Development tools Design reviews End-product performance verification The Connectivity team specializes in offering industry-leading performance and high-quality embedded radios to OEMs needing connectivity. Our Components group focuses on RF/Microwave switches and low-noise FETs. Our support team is located in North America, fostering an easy and convenient collaboration between us and your development team. Our mission is to make customers successful, which drives our success.
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
Semitron
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW06031K00FKEAHP
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
4N35
Siemens
TRANSISTOR OUTPUT OPTOCOUPLER; Minimum Collector-emitter Breakdown Voltage: 30 V; Maximum Dark Current: 50 nA; Maximum Isolation Voltage: 5300 V; Maximum Forward Current: .06 A; Maximum Operating Temperature: 100 Cel;
TIL111M
Everlight Electronics
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Forward Current: .06 A; Maximum Isolation Voltage: 5000 V; Maximum Operating Temperature: 110 Cel; Configuration: SINGLE; Minimum Collector-emitter Breakdown Voltage: 80 V;
H11G2TVM
The Onsemi H11G2TVM is a single optocoupler with a max forward current of 0.06A and Darlington output type. With a min operating temperature of -40°C and max isolation voltage of 7500V, it is ideal for applications requiring high current transfer ratio, such as industrial control systems and power supplies.
4N35S-TA1
Lite-on Technology
Lite-on Technology's 4N35S-TA1 is a single optocoupler with max forward current of 0.06 A, ideal for applications requiring high isolation voltage up to 3550 V. With a min C-E breakdown voltage of 30 V and low dark current of 50 nA, it operates b/w -55°C to 100°C efficiently.
4N25-X009T
TRANSISTOR OUTPUT OPTOCOUPLER; Configuration: SINGLE; Minimum Operating Temperature: -55 Cel; Nominal Current Transfer Ratio: 50 %; Maximum Forward Current: .06 A; Maximum Dark Current: 50 nA;
TLP182(GB-TPL,E
Toshiba
Toshiba's TLP182(GB-TPL,E is a single optocoupler with AC input-transistor output. It has a max forward current of 0.05A, min operating temp of -55°C, and max isolation voltage of 3750V. Ideal for applications requiring high current transfer ratio, low dark current, and surface mounting feature.
ILD217T
Vishay Dale
TRANSISTOR OUTPUT OPTOCOUPLER; Additional Features: UL RECOGNIZED; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Isolation Voltage: 4000 V; Maximum Forward Current: .03 A; Minimum Operating Temperature: -55 Cel;
4N25
Tt Electronics Plc
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Additional Features: UL RECOGNIZED; Maximum Power Dissipation: .15 W;
HMHA281
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin (Sn); No. of Elements: 1; Additional Features: UL RECOGNIZED; Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Isolation Voltage: 3750 V;
TLP292-4(4LGBTPE
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER;
SFH6186-5
TRANSISTOR OUTPUT OPTOCOUPLER; No. of Elements: 1; Minimum Operating Temperature: -55 Cel; Configuration: SINGLE; Maximum Isolation Voltage: 5300 V; Maximum Operating Temperature: 100 Cel;
Intersil
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .06 A; No. of Elements: 1;
LTV-356T-G
LTV-356T-G by Lite-on Technology is a single optocoupler with a max forward current of 0.05A and min CTR of 50%. With a max isolation voltage of 3750V, it is ideal for applications requiring high voltage protection such as industrial control systems. Its surface mount feature makes it easy to integrate into various electronic designs.
FOD817ASD
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Maximum Forward Current: .05 A; Minimum Collector-emitter Breakdown Voltage: 70 V; Configuration: SINGLE;
PS2811-1-F3-A-M
Nec Electronics
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Isolation Voltage: 2500 V; Minimum Collector-emitter Breakdown Voltage: 40 V; Minimum Operating Temperature: -55 Cel; Configuration: SINGLE;
TLP293(GR-TPL,E(T
Toshiba's TLP293(GR-TPL,E(T) is a single optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage up to 3750V. With a min. C-E breakdown voltage of 80V and min. transfer ratio of 100%, it operates b/w -55°C to 125°C, making it suitable for surface mounting in various electronic devices.
LTV-817S
LTV-817S by Lite-on Technology is a single optocoupler with a max forward current of 0.05A and operating temperature range from -50°C to 110°C. With a min C-E breakdown voltage of 35V, it's ideal for applications requiring high isolation voltage up to 5000V, such as in power supplies or industrial control systems.
PS2801-1-F3-A-K
Nec Electronics America
TRANSISTOR OUTPUT OPTOCOUPLER; Additional Features: UL RECOGNIZED; Maximum Isolation Voltage: 2500 V; Maximum Dark Current: 100 nA; Minimum Operating Temperature: -55 Cel; Minimum Collector-emitter Breakdown Voltage: 80 V;
IL207AT
Telefunken Microelectronics
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; Maximum Power Dissipation: .15 W; Maximum Forward Current: .06 A;
PS2801-4-F3-A
Nec Compound Semiconductor Devices
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Additional Features: UL RECOGNIZED; Nominal Current Transfer Ratio: 80 %; No. of Elements: 4; JESD-609 Code: e6;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PS2501L-4-A
Renesas Electronics
PS2501L-4-A by Renesas Electronics is a 4-channel optocoupler with max. forward current of 0.08A, operating temp. range -55 to 100°C, and isolation voltage of 5000V. It's used in applications requiring high-voltage isolation like industrial automation and power supplies due to its transistor output configuration.
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Maximum Dark Current: 100 nA; Maximum Operating Temperature: 100 Cel; Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Isolation Voltage: 5000 V;
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Forward Current: .08 A; Nominal Current Transfer Ratio: 300 %; Configuration: SEPARATE, 4 CHANNELS; Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Isolation Voltage: 5000 V;
California Eastern Laboratories
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Maximum Forward Current: .08 A; JESD-609 Code: e6; No. of Elements: 4; Minimum Operating Temperature: -55 Cel;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .08 A; Nominal Current Transfer Ratio: 300 %; Minimum Collector-emitter Breakdown Voltage: 80 V;
PS2501L-1-F3-A
PS2501L-1-F3-A by Renesas Electronics is a SINGLE optocoupler with max. forward current of 0.08A, operating temp. range -55 to 100°C, and isolation voltage of 5000V. It's used in applications requiring high collector-emitter breakdown voltage, low dark current, and nominal current transfer ratio of 300%.
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Maximum Forward Current: .08 A; Minimum Operating Temperature: -55 Cel; Nominal Current Transfer Ratio: 300 %; Maximum Dark Current: 100 nA;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Configuration: SINGLE; Additional Features: UL RECOGNIZED; Nominal Current Transfer Ratio: 300 %; Maximum Forward Current: .08 A;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: TIN BISMUTH/NICKEL PALLADIUM GOLD; JESD-609 Code: e6/e4; Maximum Isolation Voltage: 5000 V; Maximum Forward Current: .08 A; Configuration: SINGLE;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Additional Features: UL RECOGNIZED; Configuration: SINGLE; Minimum Collector-emitter Breakdown Voltage: 80 V; Nominal Current Transfer Ratio: 300 %;
PS2501L-1-A
PS2501L-1-A by Renesas is a SINGLE optocoupler with 0.08A forward current, 300% transfer ratio, and 5000V isolation voltage. Ideal for applications requiring high voltage protection and signal transmission in temperature range of -55 to 100°C.
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: TIN BISMUTH/NICKEL PALLADIUM GOLD; Additional Features: UL RECOGNIZED; Maximum Forward Current: .08 A; Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Isolation Voltage: 5000 V;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Nominal Current Transfer Ratio: 300 %; Maximum Forward Current: .08 A; Configuration: SINGLE; Maximum Isolation Voltage: 5000 V;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Minimum Collector-emitter Breakdown Voltage: 80 V; Configuration: SINGLE; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e6;
PS2501-1-A
Renesas Electronics PS2501-1-A is a SINGLE optocoupler with max. forward current of 0.08A, operating temp. range -55 to 100°C, and min. collector-emitter breakdown voltage of 80V. Ideal for applications requiring high isolation voltage (5000V) and nominal current transfer ratio of 300%.
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Maximum Forward Current: .08 A; JESD-609 Code: e6; Maximum Isolation Voltage: 5000 V; Maximum Dark Current: 100 nA;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 100 Cel; Maximum Isolation Voltage: 5000 V; Nominal Current Transfer Ratio: 300 %;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Nominal Current Transfer Ratio: 300 %; JESD-609 Code: e6; Maximum Dark Current: 100 nA; No. of Elements: 1;
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Dark Current: 100 nA; No. of Elements: 1; Additional Features: UL RECOGNIZED; Nominal Current Transfer Ratio: 300 %; Maximum Isolation Voltage: 5000 V;
PS2501L-2-E3
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 2; Minimum Collector-emitter Breakdown Voltage: 80 V; Maximum Dark Current: 100 nA; Minimum Operating Temperature: -55 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved