Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi MOC207R2M is a single optocoupler with a max forward current of 0.06A and min operating temperature of -40°C, ideal for applications requiring high isolation voltage up to 2500V. With a min current transfer ratio of 100%, it offers reliable performance in surface mount configurations at temperatures up to 100°C.
Median Price
$0.346
Lifecycle Status
Suppliers In-Stock
57
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.356
100+ parts
$0.324
1k+ parts
$0.292
10k+ parts
-
Farnell
$0.436
$0.235
$0.187
$0.159
Arrow
$0.761
$0.375
$0.273
$0.218
Mouser Electronics
$0.810
$0.365
$0.300
$0.270
Newark
$0.824
$0.361
$0.296
Future Electronics
$0.335
Chip1Stop
$0.266
DigiKey
$0.280
Verical
$0.301
$0.274
Master Electronics
$0.210
$0.205
$0.194
Element14
$0.463
$0.370
Rochester
$0.298
$0.247
$0.220
RS (Exports)
Freelance Electronics
$0.164
$0.197
$0.163
Digiode
$0.231
Nova Conductors
TME
$0.570
$0.350
Maritex
$0.604
$0.264
Bristol Electronics
$0.635
$0.165
IBS Electronics
$0.820
Component Electronics Inc.
$1.150
$0.870
$0.750
NAC Semi
$0.610
Vyrian
Chip Stock
Dan-Mar Components
NexGen Digital
ComSIT Distribution GmbH
R&J Components
Cyclops Electronics Ltd
LIBRA Elektronik GmbH
Lantek
HZD GmbH
ComSIT USA
Prism Electronics
Zilex Electronics Inc.
Inventory MP
Florida Circuit
ACDS - Activité Composants Distribution Service
Resion
J2 Sourcing AB
Extreme Components
Semi Source
Mentor Electronics Marketing, LLC
Atlantic Semiconductor
Flip Electronics
Holdelec - ElecDif-Pro
Sensible Micro Corp
Contempo Components LLC
PC Components Company LLC
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
EMSNET
Microfarads
Speed Components Ltd
Diverse Electronics
Electronics Depot
North Shore Components
Semtec, LLC
Aztec Data Supply Inc.
$0.045
Semicontronic
$0.143
$0.139
Corohmni
Corphita
$0.219
Advanced Electronics
Argo Parts USA
Continental Prestige Electronics
$0.353
Ampacity Inc.
$0.431
Perfect Parts
Glotronic Ltd.
RC Electronics
$0.360
$0.330
$0.320
Kepictronics
Metaverse IC Inc.
Authorized Procurement Solutions
TANS Electronics
Kulean Microsystems
QUARKTWIN TECHNOLOGY LTD
Assy Fe
Futuretech Components
SupplyDigital Components
Infinite Electronics LLP (Excess)
Eastek
GreenTree Electronics
Computer Components Inc. - USA
Speed Components Ltd (Excess)
Netroflash
$0.343
Supply Digital
S.R.D Solutions
Problanco Electronics
UHIMA Technologies
Single configuration simplifies installation and reduces complexity.
Can handle high forward current, making it suitable for various applications.
Transistor output optocoupler ensures efficient signal transfer.
High maximum operating temperature allows for reliable performance in various environments.
Wide range of operating temperatures ensures functionality in both extreme cold and hot conditions.
Matte tin terminal finish provides good electrical conductivity and corrosion resistance.
Efficient power dissipation capability helps in preventing overheating.
High current transfer ratio ensures accurate signal transmission.
Low dark current minimizes power consumption when optocoupler is not in use.
TR packing method provides ease of handling and storage.
High breakdown voltage offers protection against voltage spikes.
Consistent current transfer ratio ensures reliable operation.
High isolation voltage provides safety and protects against electrical interference.
Surface mount feature allows for easy and secure installation on PCBs.
Low forward voltage drop minimizes power loss and enhances efficiency.
High on-state current capability makes it suitable for demanding applications.
Optocoupler Transistor Outputs MOC207R2M attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Onsemi
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Minimum Current Transfer Ratio:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
Maximum Power Dissipation:
Sub-Category:
Terminal Finish:
MOC207R2M Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
1552200168
Molex
WIRE AND CABLE;
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
MOCD207M
The Onsemi MOCD207M is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.06A, operating temp range -40 to 100°C, and isolation voltage of 2500V. Ideal for applications requiring high isolation and signal transfer in harsh environments.
FOD852SD
FOD852SD by Onsemi is a single optocoupler with built-in diode and resistor. It features a max forward current of 0.05A, min operating temperature of -30°C, and max isolation voltage of 5000V. Ideal for applications requiring high current transfer ratio, low dark current, and fast response time in surface mount configurations.
4N25
Intersil
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 1.5 V; Maximum Response Time: .0000028 s; Maximum Forward Current: .06 A;
MOC223M
Fairchild Semiconductor
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Voltage: 1.3 V; Maximum Operating Temperature: 100 Cel; Maximum Dark Current: 50 nA;
PS2801-1-F3-A
Nec Electronics
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Bismuth (Sn/Bi); Nominal Current Transfer Ratio: 80 %; Maximum Dark Current: 100 nA; Configuration: SINGLE; No. of Elements: 1;
H11G2SM
Harris Semiconductor
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; JESD-609 Code: e0; Minimum Current Transfer Ratio: 1000 %;
TLP293(GB-TPL,E(T
Toshiba
Toshiba's TLP293(GB-TPL,E(T) is a single optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage up to 3750V. With a min C-E breakdown voltage of 80V and surface mount feature, it operates b/w -55°C to 125°C efficiently.
LTV-847S-BC
Lite-on Technology
LTV-847S-BC by Lite-on Technology is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05 A and operates b/w -30 to 100°C. Ideal for applications requiring high isolation voltage, low power dissipation, and fast response time in surface mount setups.
TLP291(GR,SE(T
TLP291(GR,SE(T by Toshiba is a single optocoupler transistor output with a max forward current of 0.05 A. It operates in temperatures ranging from -55 to 110 °C and has a min collector-emitter breakdown voltage of 80 V. This component is commonly used for electrical isolation and signal transmission applications.
FOD817B3SD
FOD817B3SD by Onsemi is a SINGLE optocoupler with max. forward current of 0.05A, min. transfer ratio of 130%, and max. isolation voltage of 5000V. Ideal for applications requiring high isolation voltage and reliable signal transmission in temperature range -55 to 110°C.
MCT61
MCT61 by Onsemi is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.06 A and operates b/w -55 to 100°C. Ideal for applications requiring high isolation voltage, low response time, and reliable transistor output optocoupling.
HCPL-817-500E
Broadcom
Broadcom's HCPL-817-500E is a SINGLE optocoupler with max. forward current of 0.05A, ideal for applications requiring high isolation voltage up to 5000V. It features a fast response time of 18μs and operates b/w -30°C to 100°C, making it suitable for various surface mount configurations in electronics.
HMHA2801
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin (Sn); No. of Elements: 1; Additional Features: UL RECOGNIZED; Nominal Current Transfer Ratio: 80 %; Maximum Operating Temperature: 100 Cel;
ILD217T
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 4000 V; No. of Elements: 2; Maximum Operating Temperature: 100 Cel; Additional Features: UL APPROVED;
4N35
Siemens
TRANSISTOR OUTPUT OPTOCOUPLER; Minimum Collector-emitter Breakdown Voltage: 30 V; Maximum Dark Current: 50 nA; Maximum Isolation Voltage: 5300 V; Maximum Forward Current: .06 A; Maximum Operating Temperature: 100 Cel;
LTV-847S
LTV-847S by Lite-on Technology is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and operates b/w -30°C to 100°C. Ideal for applications requiring high isolation voltage and fast response time in surface mount setups.
TLP291-4(TP,E
Toshiba's TLP291-4(TP,E is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and operates b/w -55°C to 110°C. With a min CTR of 50%, it offers high isolation voltage of 2500V, making it ideal for surface mount applications requiring reliable signal transmission.
SFH6156-3T
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Forward Current: .06 A; Maximum Isolation Voltage: 5300 V; Maximum Operating Temperature: 100 Cel; Nominal Current Transfer Ratio: 100 %; Configuration: SINGLE;
CNY17-3
Infineon Technologies
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Configuration: SINGLE; Maximum Dark Current: 100 nA; No. of Elements: 1;
TLP291(GB-TP,SE(T
Toshiba's TLP291(GB-TP,SE(T optocoupler features 0.05A max forward current, 100% transfer ratio, and 3750V isolation voltage. Ideal for applications requiring single transistor output optocouplers with -55 to 110°C operating range and 80V min breakdown voltage.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MOC223R2M
The Onsemi MOC223R2M is a single optocoupler with a Darlington output, featuring a max forward current of 0.06A and min operating temperature of -40°C. With a min CTR of 500% and isolation voltage of 2500V, it's ideal for applications requiring high current transfer ratios and electrical isolation in temperatures ranging from -40°C to 100°C.
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Forward Voltage: 1.3 V; Minimum Operating Temperature: -40 Cel;
MOC223VM
Onsemi's MOC223VM is a single optocoupler with Darlington output, featuring max forward current of 0.06A and min operating temp of -40°C. Ideal for applications requiring high isolation voltage up to 2500V, such as in power supplies and industrial control systems.
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Current Transfer Ratio: 500 %; Minimum Collector-emitter Breakdown Voltage: 30 V; Maximum Forward Current: .06 A;
MOC223R2VM
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Forward Voltage: 1.3 V; Maximum Isolation Voltage: 2500 V;
MOC223R2VM by Onsemi is a single configuration optocoupler with a max forward current of 0.06A. It has a min operating temperature of -40°C and a max operating temperature of 100°C. This optocoupler is commonly used in applications requiring high isolation voltage and surface mounting feature.
The Onsemi MOC223M is a single optocoupler with a Darlington output, featuring a max forward current of 0.06 A and an isolation voltage of 2500 V. With a min operating temperature of -40°C and mounting feature for surface mount applications, it is ideal for use in high-power electronic circuits requiring reliable signal isolation.
MOC207R2M
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Current Transfer Ratio: 100 %; Additional Features: UL RECOGNIZED; Maximum Isolation Voltage: 2500 V;
MOC217R2M
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Power Dissipation: .15 W; Minimum Operating Temperature: -40 Cel; Maximum Dark Current: 50 nA;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum On State Current: .15 A; Minimum Current Transfer Ratio: 100 %; Minimum Collector-emitter Breakdown Voltage: 30 V;
MOC207M
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 2500 V; Additional Features: UL RECOGNIZED; JESD-609 Code: e3;
Onsemi's MOC207M is a single optocoupler with max forward current of 0.06A and min transfer ratio of 100%. Ideal for applications requiring high isolation voltage up to 2500V, surface mounting feature, and operating temperatures from -40°C to 100°C.
MOC207VM
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Minimum Current Transfer Ratio: 100 %; Minimum Collector-emitter Breakdown Voltage: 70 V;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Forward Voltage: 1.5 V; Configuration: SINGLE; No. of Elements: 1;
MOC207MR2
Fairchild Semiconductor's MOC207MR2 is a Transistor Output Optocoupler with 0.06A max forward current, 100% min current transfer ratio, and 2500V max isolation voltage. Ideal for applications requiring surface mounting feature in temperatures ranging from -40°C to 100°C.
MOC217M
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Maximum Power Dissipation: .15 W; Maximum Dark Current: 50 nA;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Forward Current: .06 A; Maximum On State Current: .15 A; Maximum Power Dissipation: .15 W;
MOC207
Isocom Components
TRANSISTOR OUTPUT OPTOCOUPLER; Configuration: SINGLE; Maximum Forward Current: .06 A; Maximum Isolation Voltage: 2500 V; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 70 V;
MOC207R1
Motorola
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: SINGLE; Maximum Isolation Voltage: 2500 V; Minimum Operating Temperature: -55 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved