Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MJD117G by Onsemi is a PNP Power BJT with 50W power dissipation, 100V max collector-emitter voltage, and 2A max collector current. Ideal for switching applications, it features a Darlington configuration with built-in diode and resistor in a small outline package suitable for surface mount technology.
Median Price
$1.155
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.351
100+ parts
$0.334
1k+ parts
10k+ parts
-
Arrow
$0.875
$0.477
$0.419
Chip1Stop
$1.120
$0.439
$0.383
Farnell
$1.190
$0.463
$0.393
$0.310
Mouser Electronics
$1.400
Newark
$1.440
$0.562
$0.391
Element14
$2.030
$0.730
$0.530
$0.520
Verical
$0.476
$0.418
$0.335
Digiode
$0.333
Nova Conductors
$0.430
IBS Electronics
$0.469
$0.455
$0.420
Flip Electronics
NAC Semi
$2.000
Vyrian
Bristol Electronics
$0.317
$0.237
Dan-Mar Components
ACDS - Activité Composants Distribution Service
ComSIT Distribution GmbH
Chip Stock
Zilex Electronics Inc.
Prism Electronics
Semicontronic
$0.298
$0.291
$0.289
Corphita
$0.316
Aztec Data Supply Inc.
$0.345
Corohmni
Advanced Electronics
Argo Parts USA
$0.397
$0.385
Continental Prestige Electronics
$0.389
Benley Electronics
$0.400
Netroflash
Ampacity Inc.
$0.650
Metaverse IC Inc.
Perfect Parts
Problanco Electronics
SupplyDigital Components
A-Z Elektronik GmbH
Kepictronics
Kulean Microsystems
Lixinc
Eastek
TANS Electronics
Glotronic Ltd.
SIE Connect GmbH (Excess)
UHIMA Technologies
GreenTree Electronics
Plastic/epoxy material makes this transistor lightweight and durable, ideal for various electronic applications.
PNP type transistors are commonly used in high-power applications, making this product suitable for switching circuits.
The Darlington configuration with built-in diode and resistor simplifies circuit design and saves space, making this transistor convenient for use.
With a high maximum power dissipation of 50W, this transistor can handle high power loads efficiently.
The high maximum collector current of 2A allows this transistor to handle heavy loads with ease.
The high maximum operating temperature of 150°C ensures reliable performance in various environmental conditions.
The high nominal transition frequency of 25 MHz indicates fast switching speed, making this transistor suitable for switching applications.
Power Bipolar Junction Transistors (BJT) MJD117G attributes and parameters. Explore more Power Bipolar Junction Transistors (BJT) devices from Onsemi
Case Connection:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
MJD117G Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
EU2B-YS303C
Idec
ROTARY SWITCH;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
Jinan Jingheng Electronics
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
1N4148
Semitronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
Panjit International
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
TIP110
Baneasa S A
NPN; Configuration: DARLINGTON; Surface Mount: NO; Maximum Collector Current (IC): 4 A; Minimum DC Current Gain (hFE): 1000; Package Shape: RECTANGULAR;
TIP147T
Samsung
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 80 W; Maximum Collector Current (IC): 10 A; Terminal Position: SINGLE;
2N3055H
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): .8 MHz; Maximum Power Dissipation (Abs): 115 W; Maximum Collector Current (IC): 15 A;
BD139
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 12.5 W; Maximum Collector Current (IC): 1.5 A; No. of Terminals: 3;
NJVMJD32CT4G-VF01
NJVMJD32CT4G-VF01 by Onsemi is a PNP power bipolar junction transistor (BJT) with a max collector-emitter voltage of 100V and a max collector current of 3A. It is commonly used as an amplifier in various applications due to its small outline package style, high transition frequency of 3MHz, and wide operating temperature range from -65°C to 150°C.
TIP125
New Jersey Semiconductor Products
PNP; Configuration: SINGLE; Maximum Collector Current (IC): 5 A; Minimum DC Current Gain (hFE): 1000; Maximum Collector-Emitter Voltage: 60 V; No. of Elements: 1;
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 190 MHz; Maximum Power Dissipation (Abs): 8 W; Maximum Collector Current (IC): 1.5 A;
MJE3055T
Inchange Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 2 MHz; Maximum Power Dissipation (Abs): 75 W; Maximum Collector Current (IC): 10 A;
MJE340
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PSFM-W3;
ULN2003ANE4
ULN2003ANE4 by Texas Instruments is a NPN BJT with 7 elements and 16 terminals. It has a max collector-emitter voltage of 50V and max collector current of 0.5A, making it ideal for switching applications. The package style is in-line with through-hole terminals, suitable for complex configurations.
MJD127T4
STMicroelectronics
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 8 A; No. of Terminals: 2;
TIP111
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; Package Shape: RECTANGULAR;
BD1396STU
BD1396STU by Onsemi is a NPN BJT transistor with 80V VCEO, 1.5A IC, and 13W Ptot. Ideal for switching applications, it has a min hFE of 40 and operates up to 150°C. The package style is flange mount with through-hole terminals in a rectangular shape.
BCX5616QTA
Diodes Inc.'s BCX5616QTA is a NPN BJT transistor for switching applications. Features include VCEsat of 0.5V, hFE of 100, and IC of 1A. With a max operating temp of 150°C, it's ideal for automotive electronics conforming to AEC-Q101 standards.
TIP41C
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 2 MHz; Maximum Collector Current (IC): 6 A; Maximum Collector-Emitter Voltage: 100 V;
TIP42A
Micro Commercial Components
Power Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Collector Current (IC): 6 A; Package Style (Meter): FLANGE MOUNT;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 10 MHz; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): .5 A;
TIP147
Power Innovations
Power Bipolar Transistors; Surface Mount: NO; Package Shape: RECTANGULAR; Qualification: Not Qualified; Package Body Material: PLASTIC/EPOXY; Package Style (Meter): FLANGE MOUNT;
MJD45H11-1G
MJD45H11-1G by Onsemi is a PNP BJT transistor with 80V VCEO, 8A IC, and 20W power dissipation. Ideal for switching applications, it has a min hFE of 40 and operates up to 150°C. The package style is in-line with matte tin finish, suitable for through-hole mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MJD127T4G
MJD127T4G by Onsemi is a PNP BJT with Darlington configuration, ideal for switching applications. It features a max collector-emitter voltage of 100V, collector current of 8A, and power dissipation of 20W. With a transition frequency of 4MHz, it operates b/w -65 to 150°C making it suitable for various power control circuits.
Motorola
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 8 A; Maximum VCEsat: 4 V;
MJD127T4 by Onsemi is a PNP BJT transistor with Darlington configuration, ideal for switching applications. It has a max collector-emitter voltage of 100V, max collector current of 8A, and min DC current gain of 100. With a package style of small outline and surface mount capability, it offers high power dissipation up to 20W in a compact rectangular shape.
MJD122T4G
MJD122T4G by Onsemi is a NPN BJT with Darlington configuration, ideal for switching applications. It features a max collector-emitter voltage of 100V, max collector current of 8A, and min DC current gain of 100. With a package style of small outline and surface mount capability, it offers high power dissipation up to 20W in a compact design.
MJD122T4
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 4 MHz; Maximum Collector Current (IC): 8 A; Package Shape: RECTANGULAR;
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 8 A; Maximum Time At Peak Reflow Temperature (s): 30;
The Onsemi MJD122T4 is a NPN Darlington BJT with built-in diode and resistor, ideal for switching applications. It has a max collector-emitter voltage of 100V, max collector current of 8A, and min DC current gain of 100. With a package style of small outline and peak reflow temp of 235°C, it offers high power dissipation up to 20W in a compact rectangular shape.
MJD112T4G
MJD112T4G by Onsemi is a NPN BJT with Darlington configuration, ideal for switching applications. It has a max collector-emitter voltage of 100V, max collector current of 2A, and min DC current gain of 200. With a package style of small outline and surface mount capability, it operates up to 150°C making it suitable for various power applications.
MJD117T4G
MJD117T4G by Onsemi is a PNP power BJT with 100V VCEO, 2A IC, and 20W max power dissipation. Ideal for switching applications, it features a Darlington configuration with built-in diode and resistor in a small outline package. With a transition frequency of 25MHz and operating temperature up to 150°C, it offers high performance in compact designs.
MJD127G
MJD127G by Onsemi is a PNP power BJT with Darlington configuration, built-in diode and resistor. It has a max collector-emitter voltage of 100V, max collector current of 8A, and min DC current gain of 100. Ideal for switching applications in small outline packages, it operates up to 150°C with a transition frequency of 4MHz.
Changzhou Galaxy Century Microelectronics
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 4 MHz; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 8 A;
MJD122G
MJD122G by Onsemi is a NPN Power BJT with 100V VCEO, 8A IC, and 20W Ptot. Ideal for switching applications, it features a Darlington configuration with built-in diode and resistor in a small outline package. Suitable for surface mount assembly with a max operating temperature of 150°C.
MJD117T4
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A; Transistor Element Material: SILICON;
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 25 MHz; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A;
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 25 MHz; Maximum Collector Current (IC): 2 A; Transistor Application: SWITCHING;
Continental Device India
PNP; Configuration: DARLINGTON; Surface Mount: YES; Nominal Transition Frequency (fT): 25 MHz; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 2 A;
MJD112G
MJD112G by Onsemi is a NPN BJT transistor with 100V VCE, 2A IC, and 20W Ptot. Ideal for switching applications, it features a Darlington configuration in a small outline package with Gull Wing terminals. With hFE of 200 and fT of 25MHz, it operates up to 150°C making it suitable for various power control circuits.
MJD112T4
PNP; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: YES; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 2 A; Moisture Sensitivity Level (MSL): 1;
NPN; Configuration: DARLINGTON; Surface Mount: YES; Nominal Transition Frequency (fT): 25 MHz; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 2 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved