Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC74HC175AFELG by Onsemi is a 4-bit latch with 225 ns propagation delay, operating b/w -55 to 125 °C. It has a supply voltage of 2-6 V and can handle load capacitance of 50 pF. Ideal for applications requiring positive edge trigger type in military-grade environments.
Median Price
$0.317
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$0.263
10k+ parts
$0.235
DigiKey
$0.400
Verical
$0.293
Digiode
$0.247
Chip Stock
Vyrian
Corphita
$0.234
Corohmni
$0.248
AZTECH Wire
$20.330
TANS Electronics
SupplyDigital Components
Problanco Electronics
Continental Prestige Electronics
$0.221
Kepictronics
Kulean Microsystems
UHIMA Technologies
Microchip USA
The plastic/epoxy material used in the package body ensures durability and resistance to environmental factors, making this latch reliable for a variety of applications.
Being surface mountable makes the latch easy to install and saves space on the PCB, providing a more compact and efficient design.
The rectangular package shape allows for easy integration into existing circuit designs and facilitates placement on the PCB.
Operating at a nominal supply voltage of 3V makes this latch suitable for low power applications while still providing reliable performance.
With a high maximum operating temperature of 125 °C, this latch can withstand harsh environmental conditions and ensures stable performance in demanding applications.
Latches & Flip-Flops MC74HC175AFELG attributes and parameters. Explore more Latches & Flip-Flops devices from Onsemi
Family:
JESD-30 Code:
JESD-609 Code:
Length:
Load Capacitance (CL):
Logic IC Type:
Maximum Frequency At Nominal Supply:
Maximum I (ol):
Moisture Sensitivity Level (MSL):
No. of Bits:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Power Supplies (V):
Propagation Delay (tpd):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Type:
Width:
Minimum fmax:
MC74HC175AFELG Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 27/Jan/2012
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BAV99
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
Dc Components
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
74HC174D,653
Nexperia
D FLIP-FLOP; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MC74AC259DG
MC74AC259DG by Onsemi is a CMOS latch with 17ns propagation delay at 5V, suitable for industrial applications. It has 16 terminals, operates b/w -40 to 85°C, and supports supply voltages of 3.3/5V. The package is small outline with matte tin finish and Gull Wing terminals for surface mount assembly.
SN74LS76AN
Texas Instruments
SN74LS76AN by Texas Instruments is a TTL latches & flip-flops IC with 2 functions, 2 bits, and 16 terminals. It operates at a supply voltage of 5V with a propagation delay of 20ns. Ideal for applications requiring negative edge triggering and complementary output polarity in commercial temperature grades.
CD74ACT273M96G4
CD74ACT273M96G4 by Texas Instruments is an 8-bit latch with positive edge trigger, operating at a max frequency of 85 MHz. It has a supply voltage range of 4.5V to 5.5V and can handle load capacitance up to 50 pF. This small outline package is commonly used in military-grade applications requiring fast data storage and retrieval.
SN74LVC2G74DCURG4
SN74LVC2G74DCURG4 by Texas Instruments is a latches & flip-flops IC with 5.9ns propagation delay, operating at 1.8V nominal voltage and 3.3V power supplies. It features a small outline package, positive edge trigger type, and is suitable for automotive applications due to its wide temperature range of -40°C to 125°C.
74AHC74PW-Q100J
NXP Semiconductors
NXP Semiconductors' 74AHC74PW-Q100J is a dual-function latch with a propagation delay of 12 ns and max frequency of 75 MHz. Ideal for automotive applications, it operates b/w -40 to 125°C, has a supply voltage range of 2-5.5V, and features complementary output polarity.
NB4L52MNG
NB4L52MNG by Onsemi is a high-speed ECL flip-flop with a propagation delay of 0.5 ns, ideal for industrial applications requiring fast response times. Operating at a supply voltage range of 2.375V to 5.5V, it offers complementary output polarity and positive edge triggering. With a compact square package shape and surface-mount capability, this chip carrier is suitable for space-constrained designs needing quick signal processing.
CD74HCT174M96
Intersil
D FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
DM74LS273N
Rochester Electronics
D FLIP-FLOP; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR;
SN74HC74DR
SN74HC74DR by Texas Instruments is a dual latches & flip-flops IC with 2 functions, operating at 5V. It has a propagation delay of 220ns and can handle load capacitance of 50pF. Ideal for industrial applications requiring positive edge triggering, this CMOS technology chip comes in a small outline package with surface mount capability.
SN74LVC1G80DCKR
SN74LVC1G80DCKR by Texas Instruments is a latch with 12.5 ns propagation delay, 50 pF load capacitance, and 9.9 ns propagation delay. It operates at a supply voltage of 1.8V and has a max frequency of 160 MHz. Ideal for automotive applications due to its small size and low power consumption.
SN74LS174N
Advanced Micro Devices
D FLIP-FLOP; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
MM74HC74AMTC
MM74HC74AMTC by Onsemi is a dual-function Latch & Flip-Flop with 14 terminals. It operates at a supply voltage range of 2-6V, offering a max frequency of 28MHz and propagation delay of 140ns. Ideal for industrial applications requiring positive edge triggering and complementary output polarity in compact SMD designs.
74AHC74PW,118
D FLIP-FLOP; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR;
CD74HC173E
Thomson Consumer Electronics
D FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
74LVC1G74DP-Q100,125
NXP Semiconductors' 74LVC1G74DP-Q100,125 is a CMOS latch with 13.4 ns propagation delay and operates b/w -40 to 125 °C. Ideal for automotive applications, it features a positive edge trigger, dual terminal position, and compl output polarity.
CD40175BE
MC14044BDR2G
MC14044BDR2G by Onsemi is a 4-bit latch with 350 ns propagation delay at 5V. It operates in a temperature range of -55 to 125 °C and has a load capacitance of 50 pF. Ideal for military applications due to its CMOS technology and small outline package style.
CD74AC273M96
Rca Solid State
D FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
CD74HC74E
General Electric Solid State
D FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC74HC74ADG
MC74HC74ADG by Onsemi is a dual-function latch with 3V nominal voltage, 150ns propagation delay, and 4A max I (ol). It is used in applications requiring positive edge trigger type, with a temperature range of -55 to 125 °C.
MC74HC74AN
MC74HC74AN by Onsemi is a dual latches & flip-flops IC with 14 terminals. It operates at 3V nominal voltage, has 150ns propagation delay, and can handle load capacitance of 50pF. Ideal for applications requiring positive edge trigger type and complementary output polarity in military-grade temperature environments.
Motorola
MC74HC74ADTR2G
MC74HC74ADTR2G by Onsemi is a dual-function latch with 14 terminals. It operates at a nominal voltage of 3V and has a load capacitance of 50pF. With a propagation delay of 150ns, it is ideal for applications requiring positive edge triggering in military-grade environments up to 125°C.
MC74HC74ANG
MC74HC74ANG by Onsemi is a dual-function latches & flip-flops IC with 14 terminals. It operates at a nominal voltage of 3V and has a max frequency of 20MHz. With positive edge trigger type, it finds application in military-grade systems requiring fast propagation delay of 150ns.
MC74AC273DWR2G
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
MC74AC273DWR2G by Onsemi is an 8-bit latch with a supply voltage of 3.3/5V, operating temperature range of -40 to 85°C, and a max frequency of 75MHz. It is used in industrial applications requiring positive edge triggering and true output polarity, with surface mount packaging for compact designs.
MC74HC74ADR2G
D FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
MC74AC74DG
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
MC74AC74NG
D FLIP-FLOP; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
MC74AC74N
MC74HC273ADWG
MC74HC273ADWG by Onsemi is an 8-bit latch with a 3V nominal voltage, 50pF load capacitance, and 220ns propagation delay. It is used in applications requiring positive edge triggering, operating b/w -55 to 125°C, with a max frequency of 20MHz.
MC74HC273ADWR2G
MC74HC273ANG
D FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR;
MC74HC73ADR2G
J-K FLIP-FLOP; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
MC74AC273DTR2G
MC74AC273DTR2G by Onsemi is an 8-bit latch with a supply voltage of 3.3/5V, operating at a max frequency of 75MHz. It features a propagation delay of 14.5ns and is ideal for industrial applications requiring positive edge triggering in a small outline package.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved