Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC33035DWR2 by Onsemi is a Brushless DC Motor Controller IC with 24 terminals. It operates b/w -40 to 85°C, with Vsup ranging from 10V to 30V. Suitable for motion control applications, it features a small outline package and bipolar technology.
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Sensible Micro Corp
Digiode
Vyrian
Nova Conductors
Semicontronic
$0.500
$0.488
$0.485
Ampacity Inc.
$1.500
Corohmni
$3.939
AZTECH Wire
$10.434
Advanced Electronics
$10.878
$10.334
Aztec Data Supply Inc.
$17.850
Lixinc
Problanco Electronics
Continental Prestige Electronics
Argo Parts USA
SupplyDigital Components
Kulean Microsystems
TANS Electronics
Futuretech Components
Robosynatics
$0.638
Lucentia Tech
Microchip USA
UHIMA Technologies
Corphita
Bastille Electronics
Plastic/epoxy material provides durability and protects the internal components, ensuring reliability in various operating conditions.
Surface mount design allows for easy and efficient PCB assembly, reducing production time and cost.
Suitable supply voltage for efficient operation and compatibility with a wide range of systems.
Sufficient number of terminals for connecting to multiple external components and peripherals.
High maximum operating temperature ensures stability and performance in demanding environments.
Low minimum operating temperature enables the product to function effectively in cold conditions.
Bipolar technology offers efficient control and precision in motor operation, enhancing overall performance.
Low supply current requirement helps in reducing power consumption and heat generation.
Motion Control ICs MC33035DWR2 attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
MC33035DWR2 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
STM32H753BIT6
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
BAV99
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
261
Deltrol Controls
Other Relays;
STM32H750VBT6
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
Intersil
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DRV8886ATRHRR
DRV8886ATRHRR by Texas Instruments is a Motion Control IC with 28 terminals, operating voltage range of 8-37V, and temp. range of -40 to 125°C. Ideal for automotive applications, this IC features a compact rectangular package suitable for surface mount assembly in stepper motor controllers.
STGIB15CH60TS-LZ
AC MOTOR CONTROLLER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
IRAMS10UP60B-2
IRAMS10UP60B-2 by Infineon Technologies is a Motion Control IC with 1 function. It operates at a nominal voltage of 15V and has a max output current of 15A. This AC motor controller is commonly used in automotive applications.
FSB50250A
Onsemi
FSB50250A by Onsemi is a Motion Control IC with 23 terminals, Vsup range of 13.5-16.5V, and max output current of 3.1A. Ideal for AC motor control applications due to its compact MICROELECTRONIC ASSEMBLY package style and matte tin terminal finish.
FSBB15CH60C
FSBB15CH60C by Onsemi is a Motion Control IC with 27 terminals and a supply voltage range of 13.5V to 16.5V. It features a max output current of 15A, making it suitable for AC motor control applications. This hybrid technology IC comes in a rectangular package style with matte tin terminal finish for enhanced performance.
A3977KEDTR
Allegro MicroSystems
Allegro MicroSystems' A3977KEDTR is a Motion Control IC in PLASTIC/EPOXY package with 44 terminals. It operates at -40 to 125 °C and supports 3-5.5 V supply voltage range. Ideal for automotive applications, it's a Stepper Motor Controller with NMOS technology and can handle up to 2.5A output current.
A4979GLPTR-T
Allegro MicroSystems' A4979GLPTR-T is a Motion Control IC with 3.3V supply, 28 terminals, and -40 to 105°C operating temperature range. Ideal for stepper motor control applications due to its small outline package and industrial-grade temperature rating.
DRV8833RTYR
Texas Instruments' DRV8833RTYR is a Motion Control IC with 16 terminals and a supply voltage range of 2.7V to 10.8V. It offers a max output current of 2A, operates in industrial temperatures (-40 to 85°C), and is ideal for brush DC motor control applications.
DRV10974RUMR
DRV10974RUMR by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 4.4V to 18V, and temperature grade suitable for automotive applications. It features a package style of CHIP CARRIER and is designed for Brushless DC Motor control. With a compact size of 4x4mm and surface mount capability, it offers precise motion control in various electronic systems.
TLE7181EMXUMA1/SAMPLE
BRUSH DC MOTOR CONTROLLER;
PDRV8243SDGQQ1
PDRV8243SDGQQ1 by Texas Instruments is a Motion Control IC with 28 terminals, supporting a max output current of 12A. Operating b/w -40 to 125°C, it features BICMOS technology and is ideal for BRUSH DC MOTOR CONTROL applications in automotive systems due to its AEC-Q100 screening level.
BD6393FP-E2
BD6393FP-E2 by ROHM is a motion control IC with a supply voltage range of 16V to 28V. It features a max output current of 1.2A and operates in temperatures ranging from -25°C to 75°C. This IC is commonly used as a stepper motor controller in various applications.
VNH7070BASTR
VNH7070BASTR by STMicroelectronics is a Motion Control IC with 16 terminals, AEC-Q100 screening level, and 4-28 V supply voltage range. It is a brush DC motor controller in small outline package suitable for automotive applications.
MC33035DWR2
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADS1259QPWRQ1
Texas Instruments ADS1259QPWRQ1 is a Motion Control IC with 20 terminals, operating b/w -40 to 125°C. It has a supply voltage range of 4.75V to 5.25V and is ideal for automotive applications requiring precise control over brush DC motors.
DRV8802PWPR
Texas Instruments' DRV8802PWPR is a motion control IC with 24V nominal voltage and 1.6A max output current. Ideal for brush DC motor control applications, it features a small outline package style, industrial temperature grade, and surface-mount capability.
BD6211HFP-TR
ROHM's BD6211HFP-TR is a Motion Control IC with 1A output current, suitable for BRUSH DC MOTOR CONTROLLER applications. Operating at -40 to 85°C, it has a supply voltage range of 3-5.5V and comes in a small outline package with gull wing terminals.
LB1909MC-BH
LB1909MC-BH by Onsemi is a Motion Control IC with 12V supply voltage, 10 terminals, and 35mA supply current. It operates b/w -30 to 85°C and has a peak reflow temperature of 260°C. Ideal for applications requiring precise motion control in compact designs.
DRV8848PWP
DRV8848PWP by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 4-18V, and max output current of 2A. Ideal for brush DC motor control applications, it features a small outline package with nickel palladium gold finish and can operate in industrial temperature range (-40 to 85°C).
DRV8353FHRTAR
DRV8353FHRTAR by Texas Instruments is a Motion Control IC with 40 terminals, operating at -40 to 125 °C. It features a max supply voltage of 100V and output current of 1A, suitable for automotive applications. This chip carrier has a very thin profile and is surface mountable, making it ideal for brushless DC motor control in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC33035DWG
MC33035DWG by Onsemi is a Motion Control IC with 24 terminals, operating voltage range of 10-20V. It is a Brushless DC Motor Controller in small outline package suitable for industrial applications. Features include max output current of 0.1A, temp range -40 to 85°C, and terminal pitch of 1.27mm.
MC33035DWR2G
MC33035DWR2G by Onsemi is a Brushless DC Motor Controller IC with 24 terminals. It operates b/w -40 to 85°C, with Vsup ranging from 10V to 30V. This small outline package is ideal for motion control applications requiring a max output current of 0.1A.
MC33035DW
MC33035DW by Onsemi is a small outline motion control IC for brushless DC motor control. It operates at 10-20V with max output current of 0.01A. With industrial temperature grade, it's ideal for applications requiring precise motor control in compact spaces.
MC33HB2001EK
MC33HB2001EK by NXP Semiconductors is a Motion Control IC with 32 terminals, operating voltage range of 5-28V, and max output current of 16A. Ideal for automotive applications due to AEC-Q100 screening, MOS technology, and compact design.
MC33926PNB
Freescale Semiconductor
BRUSH DC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 32; Package Code: HQCCN; Package Shape: SQUARE; Surface Mount: YES;
MC33926PNB by NXP Semiconductors is a motion control IC with 1 function. It operates at a nominal voltage of 8V and can handle power supplies ranging from 8V to 28V. This automotive-grade IC is suitable for brush DC motor control applications.
MC33926PNBR2
MC33926PNBR2 by NXP Semiconductors is a Motion Control IC with 32 terminals, suitable for automotive applications. It operates b/w -40 to 125 °C and supports supply voltages from 5V to 28V. The chip carrier package style has a square shape and terminal pitch of 0.8mm, making it ideal for brush DC motor control in compact designs.
MC33887APVW/R2
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: HSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC33887APVW/R2 by NXP Semiconductors is a Motion Control IC with 20 terminals, operating voltage range of 5-28 V, and max output current of 5 A. Ideal for automotive applications, this stepper motor controller has a compact rectangular package suitable for surface mount assembly.
MC33035PG
MC33035PG by Onsemi is a 24-terminal motion control IC with a supply voltage range of 10-30V. It operates in industrial temperatures (-40 to 85°C) and controls brushless DC motors with a max output current of 0.1A. The rectangular plastic/epoxy package has dimensions of 31.69mm x 7.62mm x 4.44mm, making it suitable for various motor control applications.
MC33886PVW/R2
MC33886PVW/R2 by NXP Semiconductors is a Motion Control IC with 20 terminals, operating voltage of 5-28V, and max output current of 5A. Ideal for automotive applications, it features a small outline package, dual terminal position, and can withstand temperatures from -40 to 125°C.
MC33035P
MC33035P by Onsemi is a 24-terminal motion control IC with a supply voltage range of 10-30V. It operates b/w -40 to 85°C, suitable for industrial applications. This bipolar technology brushless DC motor controller has a max output current of 0.01A and peak reflow temperature of 235°C.
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MC33886PVW
MC33886PVW by NXP Semiconductors is a Motion Control IC with 20 terminals, operating voltage range of 5-28V, and AEC-Q100 screening. Ideal for automotive applications, it offers a wide temperature range from -40 to 125°C and supports stepper motor control with a compact rectangular package design.
MC33033DWR2
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved