Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LV5026M-TLM-H by Onsemi is a BICMOS LED display driver with 12V supply voltage. It features 10 terminals, GULL WING form, and PLASTIC/EPOXY package material. Ideal for graphics displays, it is surface mountable and has a small outline rectangular shape.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Advanced Electronics
$2.427
$2.209
$1.990
AZTECH Wire
$20.530
Component Stockers USA
$99.990
QUARKTWIN TECHNOLOGY LTD
Microchip USA
SupplyDigital Components
Kulean Microsystems
Problanco Electronics
Corphita
Metaverse IC Inc.
Authorized Procurement Solutions
UHIMA Technologies
Kepictronics
Corohmni
TANS Electronics
Provides a lightweight yet durable housing for the graphics display driver, ensuring longevity and portability.
Facilitates easy installation on circuit boards, making the product convenient for electronic manufacturers.
Compatible with various systems and devices that require a 12V power supply.
Offers multiple connection points for seamless integration with other components in the system.
Ensures reliable electrical contacts and corrosion resistance for stable performance.
Allows for easy soldering and desoldering processes during assembly or maintenance.
Matches the specified voltage requirements of the product, ensuring optimal performance.
Indicates the level of protection against moisture damage, enhancing the product's reliability in various environments.
Specifically designed for driving LED displays, ensuring efficient control and display capabilities.
Graphics Display Drivers LV5026M-TLM-H attributes and parameters. Explore more Graphics Display Drivers devices from Onsemi
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Sub-Category:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
LV5026M-TLM-H Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99W-7-F
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
Changzhou Starsea Electronics
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
General Diode
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
BSS138BKW,115
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
NE555D
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
KYOCERA AVX
LT3763HFE#PBF
Linear Technology
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: HTSSOP; Package Shape: RECTANGULAR; Maximum Seated Height: 1.2 mm;
TPS92518HVQPWPRQ1
Texas Instruments
TPS92518HVQPWPRQ1 by Texas Instruments is a 24-terminal LED display driver with serial data input mode, suitable for automotive applications. It operates b/w -40 to 125 °C with a supply voltage range of 6.5-65 V and features dual terminal position in a small outline package style.
MAX7219CNG+
Analog Devices
MAX7219CNG+ by Analog Devices is a Graphics Display Driver with 8-digit display capability. It operates on a supply voltage range of 4-5.5V and features serial data input mode for segment display. Ideal for LED displays, it has a max operating temperature of 70°C and uses MOS technology.
AL8861QMP-13
Diodes Inc.'s AL8861QMP-13 is an LED display driver with a supply voltage range of 4.5V to 40V, AEC-Q100 screening, and operating temperature from -40°C to 125°C. It comes in a small outline package with 8 terminals and is suitable for automotive graphics displays due to its high reliability and wide supply voltage range.
IS31FL3731C-SALS2
Integrated Silicon Solution
IS31FL3731C-SALS2 by Integrated Silicon Solution is a DOT MATRIX LED DISPLAY DRIVER with SERIAL data input mode. It operates b/w -40 to 85 °C and supports up to 144 segments. Ideal for industrial applications requiring small outline, surface mount package style.
MAX25611CATC/VY+T
LED DISPLAY DRIVER; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Matte Tin (Sn) - annealed; Maximum Time At Peak Reflow Temperature (s): 30;
PCA9955TW/Q900,118
PCA9955TW/Q900,118 by NXP Semiconductors is a Graphics Display Driver with 28 terminals and operates b/w -40 to 85 °C. It has a serial data input mode, supports multiplexed display capability, and requires a supply voltage of 3.3/5 V. Ideal for LED displays in industrial applications due to its AEC-Q100 screening level.
PCF8576DT/2,118
NXP Semiconductors' PCF8576DT/2,118 is a graphics display driver with dot matrix display mode and serial data input. It operates at 1.8-5.5V, has 56 terminals, and supports multiplexed displays. Ideal for industrial applications requiring a compact design and low power consumption.
FAN5702UC08X
Fairchild Semiconductor
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 16; Package Code: VFBGA; Package Shape: SQUARE;
CAT4238TD-GT3
CAT4238TD-GT3 by Onsemi is a 5-terminal LED display driver with a supply voltage range of 3-3.6V, suitable for industrial applications. It features a small outline package with very thin profile and shrink pitch, making it ideal for graphics display drivers. With an operating temperature range of -40 to 85°C and terminal finish in nickel palladium gold, this IC offers reliable performance in various environments.
TLC59210IPWR
TLC59210IPWR by Texas Instruments is a LED display driver with 8 channels, operating at 3-5.5V. It features parallel data input mode, small outline package style, and industrial temperature grade. Ideal for graphics displays, it has 20 terminals in a rectangular shape for surface mount applications.
PCA9632DP1,118
NXP Semiconductors' PCA9632DP1,118 is a serial graphics display driver with 8 terminals and a supply voltage range of 2.3V to 5.5V. It operates in industrial temperatures (-40°C to 85°C) and has a max frequency of 1MHz. Ideal for LED displays, this IC comes in a small outline package with gull wing terminals for surface mounting applications.
HV892K7-G
Supertex
EL DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 10; Package Code: HVQCCN; Package Shape: SQUARE;
PLP5018RSMR
LED DISPLAY DRIVER;
TLC6C598QPWRQ1
TLC6C598QPWRQ1 by Texas Instruments is a Graphics Display Driver with 8 channels, operating at 3-5.5V. It features serial data input mode, open-drain output characteristics, and LED display driver interface. Ideal for automotive applications due to AEC-Q100 screening level and wide temperature range (-40 to 125°C).
TPS92518HVPWPT
TPS92518HVPWPT by Texas Instruments is a graphics display driver with 2 channels, operating at -40 to 125 °C. It features a serial data input mode, small outline package style, and supports a max supply voltage of 65 V. Ideal for automotive applications requiring LED display drivers in compact designs.
TPS61161DRVT
TPS61161DRVT by Texas Instruments is a Graphics Display Driver with 6 terminals, operating voltage range of 2.7V to 18V, and low supply current of 1.8mA. Ideal for LED display driver applications due to its small outline package style and industrial temperature grade suitability.
MXHV9910BE
Littelfuse
The Littelfuse MXHV9910BE is a graphics display driver with 8 terminals, operating temperature range of -40 to 85°C, and max supply voltage of 15V. It supports serial/parallel data input modes and is ideal for LED display driver applications requiring a small outline package style.
LT3797ELXE#PBF
LT3797ELXE#PBF by Analog Devices is a LED display driver with 48 terminals, operating voltage range of 2.5V to 40V, and automotive temperature grade up to 125°C. It features a flatpack package style, matte tin terminal finish, and gull wing terminal form. Ideal for graphics displays in automotive applications due to its high supply voltage tolerance and wide operating temperature range.
IS31FL3731-SALS2-TR
IS31FL3731-SALS2-TR by Integrated Silicon Solution is a DOT MATRIX LED DISPLAY DRIVER with SERIAL data input mode. It operates b/w -40 to 85 °C and has 144 segments, suitable for industrial applications requiring high-quality graphics display drivers. The package style is SMALL OUTLINE, SHRINK PITCH with GULL WING terminals, making it ideal for compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LV5011MD
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR;
LV5011MD-AH
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Technology: BICMOS;
LV5012MD
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
LV5012MD-AH
LED DISPLAY DRIVER; Terminal Finish: Tin/Bismuth (Sn/Bi); Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e6;
LV5026M
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: LSSOP; Package Shape: RECTANGULAR;
LV5026MC
LV5026MC-AH
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
LV5027M-TLM-H
Display Drivers; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR;
LV5028TT-TLM-H
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
LV5029MD
LV5029MD-BH
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV5054PL
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: VQCCN; Package Shape: SQUARE;
Sanyo Semiconductor
LV5027M
Sanyo Electric
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved