Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FOD814ASD by Onsemi is a single optocoupler with a max forward current of 0.05A and min operating temperature of -55°C. It features an AC input-transistor output configuration, ideal for applications requiring high isolation voltage up to 5000V, such as in power supplies and industrial controls.
Median Price
$0.436
Lifecycle Status
Suppliers In-Stock
32
In-Stock Inventory
1k+
Arrow
1+ parts
$0.462
100+ parts
$0.260
1k+ parts
$0.159
10k+ parts
$0.133
Mouser Electronics
$0.560
$0.283
$0.197
$0.175
Newark
$0.587
$0.293
$0.167
DigiKey
$0.590
$0.295
$0.218
$0.205
Adafruit Industries
$0.695
$0.660
-
Future Electronics
$0.118
$0.113
Farnell
$0.246
$0.199
Element14
$0.411
$0.247
Avnet
Verical
$0.203
$0.186
Master Electronics
$0.131
$0.125
Flip Electronics (Authorized)
RS (Exports)
$2.822
$1.735
EBV Elektronik
Chip1Stop
$0.222
$0.179
TME
$0.480
$0.211
$0.173
Maritex
$0.529
$0.248
$0.184
Digiode
Nova Conductors
$0.738
Bristol Electronics
$0.750
$0.375
$0.150
IBS Electronics
$0.168
$0.165
NAC Semi
$0.240
Vyrian
Chip Stock
Flip Electronics
ComSIT Distribution GmbH
Cyclops Electronics Ltd
Martec Srl
ComSIT USA
Atlantic Semiconductor
Microfarads
Elcom Components
Aztec Data Supply Inc.
$0.079
Ampacity Inc.
Semicontronic
$0.156
$0.152
$0.151
Corohmni
$0.181
Argo Parts USA
$0.263
$0.255
Component Stockers USA
$0.600
$0.270
$0.200
$0.170
Corphita
$0.626
Continental Prestige Electronics
$0.676
$0.259
$0.195
Advanced Electronics
Aranea Global
$0.724
Perfect Parts
RC Electronics
$0.280
$0.250
SupplyDigital Components
Problanco Electronics
GreenTree Electronics
Robosynatics
$0.319
$0.313
Lucentia Tech
TANS Electronics
Authorized Procurement Solutions
Kulean Microsystems
Supply Digital
Eastek
UHIMA Technologies
This optocoupler has a single configuration, making it easy to implement in a circuit without additional wiring requirements.
With a maximum forward current of 0.05 A, this optocoupler can handle moderate current levels, making it suitable for various applications.
The AC input-transistor output configuration allows for effective signal isolation and amplification in AC circuits, providing versatility in circuit design.
The high maximum operating temperature of 105°C ensures reliability and performance in demanding environments.
The low minimum operating temperature of -55°C ensures functionality in a wide range of operating conditions.
The matte tin terminal finish provides good conductivity and corrosion resistance, ensuring long-term reliability.
With a maximum power dissipation of 0.15 W, this optocoupler can efficiently handle power without overheating.
The minimum current transfer ratio of 50% ensures reliable signal amplification and isolation between the input and output sides.
The high maximum isolation voltage of 5000 V provides excellent protection against voltage surges and ensures safe operation in high-voltage applications.
The surface mounting feature allows for easy and secure installation on PCBs, saving space and simplifying assembly.
Optocoupler Transistor Outputs FOD814ASD attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Onsemi
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Minimum Current Transfer Ratio:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
Maximum Power Dissipation:
Maximum Response Time:
Sub-Category:
Terminal Finish:
FOD814ASD Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
2N2222A
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Cheng-yi Electronic
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
New Jersey Semiconductor Products
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
FODM121R2
FODM121R2 by Onsemi is a single optocoupler transistor output with a max forward current of 0.05A. It has a min operating temperature of -40°C and a max operating temperature of 100°C. This component is commonly used in applications that require high isolation voltage and surface mount mounting feature.
SFH6156-3-X001
Infineon Technologies
SFH6156-3-X001 by Infineon is a single optocoupler with max forward current of 0.06A, operating temp range -55 to 100°C, and isolation voltage of 5300V. It's used in applications requiring high collector-emitter breakdown voltage, low dark current, and reliable signal transfer ratio of 100%.
4N25M
4N25M by Onsemi is a single optocoupler with max forward current of 0.06A and max operating temp of 100°C. Ideal for applications requiring transistor output optocouplers, it offers high isolation voltage of 7500V and low dark current of 50nA.
CNY173M
CNY173M by Onsemi is a single optocoupler with max forward current of 0.06A, min transfer ratio of 100%, and max isolation voltage of 4170V. Ideal for applications requiring high-speed response times, such as industrial automation systems or power supply circuits.
HMHAA280R2
AC INPUT-TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin (Sn); Nominal Current Transfer Ratio: 50 %; Maximum Forward Current: .05 A; Maximum Isolation Voltage: 2500 V; No. of Elements: 1;
TCMT4100
Telefunken Microelectronics
Optocoupler - Transistor Outputs; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 1.6 V; Minimum Operating Temperature: -40 Cel; No. of Elements: 4;
GP2S700HCP
Sharp Corporation
Sharp Corporation's GP2S700HCP is a SINGLE optocoupler with max forward current of 0.05A and min operating temp of -25°C. Ideal for applications requiring transistor output optocouplers, with max collector-emitter breakdown voltage of 35V and gold terminal finish.
6N139
North American Philips Discrete Products Div
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Minimum Operating Temperature: 0 Cel; Maximum Isolation Voltage: 2500 V;
4N25X
Isocom Components
Isocom Components' 4N25X is a SINGLE optocoupler with 0.06A forward current, 30V breakdown voltage, and 5300V isolation. Ideal for applications requiring high reliability in harsh environments such as industrial automation and power supplies due to its -55 to 100 °C operating temperature range.
TLP291-4(TP,E(T
Toshiba
Toshiba's TLP291-4(TP,E(T) is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and operates b/w -55°C to 110°C. Ideal for applications requiring high isolation voltage and low power dissipation in surface mount setups.
CNY74-2H
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -40 Cel; Maximum Response Time: .000009 s; No. of Elements: 2;
CNY17-3
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Response Time: .00001 s; Maximum Operating Temperature: 125 Cel; Minimum Current Transfer Ratio: 100 %; Maximum On State Current: .15 A;
4N25-V
Lite-on Technology
Lite-on Technology's 4N25-V is a SINGLE optocoupler with max forward current of 0.08A, operating temp range -55 to 100°C, and isolation voltage of 2500V. Ideal for applications requiring transistor output optocouplers like signal transmission in noisy environments or power supply feedback control systems.
SFH6156-2
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Additional Features: UL APPROVED; Configuration: SINGLE; Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .06 A;
4N35
Ct Micro International
TRANSISTOR OUTPUT OPTOCOUPLER; Maximum Dark Current: 50 nA; Minimum Collector-emitter Breakdown Voltage: 80 V; Additional Features: UL APPROVED, VDE APPROVED; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 110 Cel;
4N35 by Texas Instruments is a single optocoupler with max forward current of 0.06A, operating temp range -55 to 100°C, and isolation voltage up to 3550V. It's used in applications requiring high collector-emitter breakdown voltage, low dark current, and reliable signal transfer ratio of 100%.
4N25
TRANSISTOR OUTPUT OPTOCOUPLER; Minimum Collector-emitter Breakdown Voltage: 30 V; Maximum Isolation Voltage: 2500 V; Maximum Dark Current: 50 nA; Configuration: SINGLE; Maximum Forward Current: .08 A;
TLP281
Toshiba's TLP281 is a single optocoupler with max forward current of 0.05A, operating temp range -55 to 100°C, and isolation voltage of 2500V. Ideal for applications requiring transistor output optocouplers like motor control systems or power supply circuits due to its high collector-emitter breakdown voltage and low dark current.
CNY17-3S(TA)-V
Everlight Electronics
Everlight Electronics' CNY17-3S(TA)-V is a SINGLE optocoupler with 0.06 A forward current, 100% current transfer ratio, and 5000 V isolation voltage. Ideal for applications requiring high-speed response times and reliable electrical isolation in temperatures ranging from -55 to 110°C.
FODM8801AR2
FODM8801AR2 by Onsemi is a single optocoupler with max forward current of 0.02A, ideal for applications requiring high isolation voltage up to 3750V. It features a min CTR of 35%, operating temperature range from -40°C to 125°C, and surface mounting feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FOD817ASD
FOD817ASD by Onsemi is a SINGLE optocoupler with a max forward current of 0.05 A and min operating temperature of -55°C, ideal for applications requiring high isolation voltage up to 5000 V. With a fast response time of 18 µs, it is suitable for surface mounting in various electronic circuits where low dark current and high collector-emitter breakdown voltage are essential.
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Maximum Forward Current: .05 A; Minimum Collector-emitter Breakdown Voltage: 70 V; Configuration: SINGLE;
FOD817A3SD
FOD817A3SD by Onsemi is a SINGLE optocoupler with 0.05 A forward current, 80% min CTR, and 70 V min CE breakdown voltage. Ideal for applications requiring high isolation voltage of 5000 V, such as industrial control systems and power supplies.
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Response Time: .000018 s; Maximum Isolation Voltage: 5000 V; Nominal Current Transfer Ratio: 80 %;
FOD817DSD
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Response Time: .000018 s; Minimum Current Transfer Ratio: 300 %; Maximum Power Dissipation: .15 W;
FOD817DSD by Onsemi is a SINGLE optocoupler with max. forward current of 0.05A, min. transfer ratio of 300%, and max. isolation voltage of 5000V. Ideal for applications requiring high voltage isolation such as industrial controls, power supplies, and motor drives due to its surface mounting feature and fast response time of 18μs.
FOD817CSD
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -55 Cel; Maximum Response Time: .000018 s; Maximum Dark Current: 100 nA;
FOD817CSD by Onsemi is a single optocoupler with a max forward current of 0.05A and min operating temperature of -55°C, ideal for applications requiring high isolation voltage up to 5000V. With a fast response time of 18μs, it is suitable for surface mounting in various electronic circuits needing reliable transistor output optocouplers.
FOD817B3SD
FOD817B3SD by Onsemi is a SINGLE optocoupler with max. forward current of 0.05A, min. transfer ratio of 130%, and max. isolation voltage of 5000V. Ideal for applications requiring high isolation voltage and reliable signal transmission in temperature range -55 to 110°C.
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 110 Cel;
FOD817BSD
FOD817BSD by Onsemi is a single optocoupler with max forward current of 0.05A, min operating temp -55°C, and max isolation voltage of 5000V. Ideal for applications requiring high isolation voltage and low power dissipation in surface mount configurations.
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Maximum Power Dissipation: .15 W; Maximum On State Current: .05 A;
FOD817D3SD
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5000 V; Configuration: SINGLE; Minimum Operating Temperature: -55 Cel;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn) - annealed; Minimum Current Transfer Ratio: 300 %; JESD-609 Code: e3; Additional Features: UL APPROVED, VDE APPROVED;
FOD817SD
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum On State Current: .05 A; Configuration: SINGLE; JESD-609 Code: e3;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Forward Current: .05 A; Minimum Collector-emitter Breakdown Voltage: 70 V; Nominal Current Transfer Ratio: 50 %;
FOD852SD
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Minimum Collector-emitter Breakdown Voltage: 300 V; Maximum Operating Temperature: 100 Cel; Maximum Response Time: .0003 s;
DARLINGTON OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Maximum Dark Current: 200 nA; Maximum On State Current: .15 A;
FOD817DS
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Current Transfer Ratio: 300 %; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Forward Voltage: 1.4 V;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn) - annealed; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Power Dissipation: .15 W; Additional Features: UL APPROVED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved