Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FDPF045N10A by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage. It has a max IDM of 268A and EAS of 637mJ, ideal for SWITCHING applications. With 0.0045 ohm RDS(on) and 43W Pd, it operates in ENHANCEMENT MODE up to 175°C.
Median Price
$5.170
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Farnell
1+ parts
$3.770
100+ parts
$1.870
1k+ parts
$1.640
10k+ parts
-
Mouser Electronics
$2.460
$2.280
DigiKey
$2.464
$2.046
Element14
$6.820
$3.520
$2.760
Chip1Stop
$12.900
Rochester
$2.000
$1.790
$1.680
Verical
$2.237
$2.100
Digiode
$2.004
Vyrian
$2.110
Bristol Electronics
$3.447
$1.620
Chip Stock
Flip Electronics
Nova Conductors
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Corphita
$1.899
Corohmni
Component Stockers USA
$2.160
$2.020
$1.830
Ampacity Inc.
$3.900
Continental Prestige Electronics
$3.910
$2.480
Microchip USA
$13.195
Perfect Parts
GreenTree Electronics
Lixinc
Problanco Electronics
TANS Electronics
SupplyDigital Components
Kulean Microsystems
Supply Digital
UHIMA Technologies
Authorized Procurement Solutions
Netroflash
Durable and lightweight material for ease of handling and protection of internal components.
Efficient for high-speed switching applications and low ON-resistance.
Simplifies circuit design by incorporating a diode for reverse voltage protection.
Optimized for fast switching operations, making it suitable for various power control applications.
High breakdown voltage ensures reliable performance under voltage stress conditions.
Capable of handling high current surges for peak load requirements.
Efficient power dissipation capability for maintaining temperature within safe operating limits.
Operates reliably at elevated temperatures, expanding its use in various environments.
Power Field Effect Transistors (FET) FDPF045N10A attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Additional Features:
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
FDPF045N10A Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Surge Components
Silicon Standard
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Rugao Dachang Electronic
NE555D
AUIRFZ44N
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 94 W; JESD-30 Code: R-PSFM-T3; Package Style (Meter): FLANGE MOUNT;
IRF9358TRPBF
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Package Style (Meter): SMALL OUTLINE; Avalanche Energy Rating (EAS): 210 mJ;
IRF7304TRPBF
IRF7304TRPBF by Infineon Technologies is a P-CHANNEL FET with 20V DS Breakdown Voltage and 3.6A ID. It features a built-in diode, 0.09 ohm RDS(on), and operates in enhancement mode. Ideal for power management applications requiring high drain current capabilities in compact designs.
IRF640
Harris Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Maximum Turn Off Time (toff): 122 ns; Transistor Element Material: SILICON;
STP40NF10L
STP40NF10L by STMicroelectronics is a N-CHANNEL FET with 100V DS Breakdown Voltage, 160A IDM, and 0.036 ohm RDS(on). Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE at up to 175°C temperature.
SUM110P06-08L-E3
Vishay Intertechnology
Vishay Intertechnology's SUM110P06-08L-E3 is a P-channel FET with 60V DS breakdown voltage and 200A IDM. Ideal for switching applications, it features a single configuration with built-in diode, 0.008 ohm max RDS(on), and 272W max power dissipation.
FDMS86101
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 104 W; Minimum DS Breakdown Voltage: 100 V; Terminal Position: DUAL;
IRF1010NSTRLPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 170 W; Qualification: Not Qualified; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
FQD12N20LTM
Onsemi
FQD12N20LTM by Onsemi is a N-CHANNEL Power FET with 200V DS Breakdown Voltage and 36A IDM. Ideal for SWITCHING applications, it features a built-in diode, 0.32 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it has a max power dissipation of 55W and can withstand temperatures from -55 to 150°C.
G3R450MT17D
Genesic Semiconductor
Power Field-Effect Transistors;
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Maximum Drain Current (Abs) (ID): 18 A; JESD-609 Code: e3;
NDT456P
NDT456P by Onsemi is a P-CHANNEL Power FET with 30V DS Breakdown Voltage and 7.5A Drain Current. Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in a PLASTIC/EPOXY package. Operating in ENHANCEMENT MODE, it offers 0.03 ohm On Resistance and can handle up to 20A Pulsed Drain Current.
IRFR024NTRPBF
IRFR024NTRPBF by Infineon is a N-CHANNEL FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. It features 68A IDM, 71mJ EAS, and 0.075ohm RDS(ON). With a max power dissipation of 45W and operating temperature of 175°C, it's suitable for high-power electronic systems.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
IRLML0100TRPBF
IRLML0100TRPBF by Infineon is a N-CHANNEL FET with 100V DS breakdown voltage, ideal for SWITCHING applications. It features a max drain current of 1.6A, 0.22 ohm on-resistance, and 1.3W power dissipation in a SMALL OUTLINE package. Operating from -55 to 150 °C, it's suitable for various ENHANCEMENT MODE switching tasks.
IRF640NLPBF
IRF640NLPBF by Infineon Technologies is a N-CHANNEL FET with 200V DS Breakdown Voltage and 72A IDM. Ideal for SWITCHING applications, it has a max power dissipation of 150W and operates in ENHANCEMENT MODE at up to 175°C.
PMV100EPAR
Nexperia
The Nexperia PMV100EPAR is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 9A IDM and 33mJ EAS, operating in ENHANCEMENT MODE at -55 to 175 °C. With a 0.13 ohm RDS(on), this transistor is suitable for various power management tasks in automotive and industrial sectors.
IRF740APBF
Vishay Intertechnology's IRF740APBF is a N-CHANNEL FET with 400V DS Breakdown Voltage, ideal for SWITCHING applications. It features 40A Max Pulsed Drain Current and 630mJ Avalanche Energy Rating. The transistor operates in ENHANCEMENT MODE with a max power dissipation of 125W, making it suitable for high-power electronic circuits.
BSC035N10NS5ATMA1
Infineon BSC035N10NS5ATMA1 is a N-CHANNEL FET with 100V DS Breakdown Voltage, 0.0035 ohm RDS(on), and 400A IDM. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Features METAL-OXIDE SEMICONDUCTOR tech in a SMALL OUTLINE package with DUAL terminals.
IRFP460
IXYS Corporation
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Maximum Operating Temperature: 150 Cel; Maximum Drain Current (Abs) (ID): 20 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FDPF10N60NZ
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 38 W; Maximum Drain Current (ID): 10 A; Minimum DS Breakdown Voltage: 600 V;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 38 W; Maximum Operating Temperature: 150 Cel; Terminal Position: SINGLE;
FDPF12N50NZ
FDPF12N50NZ by Onsemi is a N-CHANNEL Power FET with 500V DS Breakdown Voltage. Ideal for SWITCHING applications, it features a Max IDM of 46A and 0.52 ohm RDS(on). The transistor operates in ENHANCEMENT MODE and has a max power dissipation of 42W.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 42 W; Maximum Drain-Source On Resistance: .52 ohm; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FDPF44N25T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 56 W; Package Shape: RECTANGULAR; Qualification: Not Qualified;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 56 W; Maximum Operating Temperature: 150 Cel; JESD-30 Code: R-PSFM-T3;
FDPF5N50UT
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 28 W; Maximum Drain-Source On Resistance: 2 ohm; Maximum Pulsed Drain Current (IDM): 16 A;
FDPF5N50UT by Onsemi is a N-CHANNEL Power FET with 500V DS Breakdown Voltage. It has a max IDM of 16A and EAS of 216mJ, suitable for SWITCHING applications. With a package style of FLANGE MOUNT and operating temperature up to 150°C, it offers high power dissipation at 28W in an ENHANCEMENT MODE configuration.
FDPF5N50NZ
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 30 W; Case Connection: ISOLATED; Maximum Drain Current (ID): 4.5 A;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 30 W; Maximum Drain Current (ID): 4.5 A; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FDPF18N20FT
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 41 W; Maximum Operating Temperature: 150 Cel; Transistor Element Material: SILICON;
FDPF18N20FT by Onsemi is a power field effect transistor (FET) with a min DS breakdown voltage of 200V. It is an N-channel transistor used for switching applications, with a max pulsed drain current of 72A and a max power dissipation of 41W.
FDPF3N50NZ
FDPF3N50NZ by Onsemi is a N-CHANNEL Power FET with 500V DS Breakdown Voltage. It has a max IDM of 12A and EAS of 113mJ, suitable for SWITCHING applications. Operating in ENHANCEMENT MODE, it features a max power dissipation of 27W and an RDS(on) of 2.5 ohm, making it ideal for high-power requirements.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 27 W; Operating Mode: ENHANCEMENT MODE; JESD-30 Code: R-PSFM-T3;
FDPF4N60NZ
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 28 W; JEDEC-95 Code: TO-220AB; Maximum Operating Temperature: 150 Cel;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 28 W; Maximum Operating Temperature: 150 Cel; Maximum Drain Current (ID): 3.8 A;
FDPF20N50T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 38.5 W; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY;
FDPF20N50T by Onsemi is a N-CHANNEL Power FET with 500V DS Breakdown Voltage and 80A IDM. Ideal for SWITCHING applications, it features a single configuration with built-in diode and 0.23 ohm Drain-Source On Resistance. Operating in ENHANCEMENT MODE, it has a max power dissipation of 38.5W at 150°C temperature.
FDPF7N60NZ
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 33 W; Operating Mode: ENHANCEMENT MODE; Package Body Material: PLASTIC/EPOXY;
FDPF7N60NZ by Onsemi is a power field effect transistor (FET) with a min DS breakdown voltage of 600V. It is used for switching applications and has a max pulsed drain current of 26A.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved